• 한국지반환경공학회 논문집
• /
• 제14권7호
• /
• pp.31-38
• /
• 2013

국내에서 최근 수년간의 토석류 피해가 발생된 이후에 많은 학자와 기술자들이 노력을 기울이고 있지만 아직까지 국내지형의 광역지역에서 발생하는 토석류의 위험도에 대한 명확한 평가방법이 없는 실정이다. 최근 국내에서도 광역지역에서의 토석류 발생량 및 확산 범위를 산정하기 위하여 SINMAP이라는 프로그램을 많이 활용하고 있다. 이러한 프로그램을 활용하기 위해서는 정확한 입력정수를 산정하는 것도 중요한 과제 중의 하나이다. 본 연구에서는 SINMAP에서 필요한 입력정수를 중심으로 현장에서 수행할 수 있는 시험 방법에 대해서 제안하고자 하였다. 그 결과에 의하면 투수량 계수, 흙의 점착력, 흙의 밀도, 흙의 내부마찰각과 토층의 심도가 중요한 설계정수임을 파악하였다. 이를 위한 현장조사방법으로 시험굴조사, 블록시료 채취, 현장 밀도시험, 오거보링, 지표투수시험, 공내전단시험 및 동적콘관입시험 등이 수행 가능한 것으로 판명되었다. 추가적으로 실내에서의 물리 및 역학시험 수행 등을 통하여 현장시험과 실내시험과의 비교 검토를 수행하면 입력정수에 대한 신뢰성이 향상할 수 있다. 그러나 현실적으로 토석류 발생이 예상되는 상부계류는 급경사지이므로 장비투입이 불가능하거나 투입이 가능하더라도 상부계류까지 진입도로 개설 및 관련 인허가 시간이 필요하므로 장기적으로는 경량장비의 개발이 필요할 것으로 사료된다.

• ALGAE
• /
• 제24권1호
• /
• pp.31-38
• /
• 2009

The brown algae padina concrescens is widely distributed in the northwestern Pacific Mexico. We described the population of P. concrescens based on population parameters such as cover, density and size structure and reproduc-tion at two levels tide at the intertidal area in the southwestern Baja. California Peninsula. Monthly visits from January to December 2003 were done. Both cover and density were measured in situ by quadrants method. Samples were collected to obtain size structure and percentage of reproductive fronds. Our results show there is sparial vari-ation in the population structure more than temporal. Thus, cover and density peak were at different months ineach tide level studied, the lower tide level shows the high values in cover as well as density. The frond develop-ment was observed in height/width ratio this relation was consistent only in the low tidal zone. Size class distribu-tion has consistently small size plants in both tide levels.Reproduction was seasonal in the tide channel but in both tide levels all the reproductive plants were tetrasporophyte. Our results suggest that this population is pseudopere-nial and it strongly as a consequence of the intense competition in the intertidal zone.

• 전기화학회지
• /
• 제3권2호
• /
• pp.115-120
• /
• 2000

양극 물질로 산화바나듐 박막, 고체전해질로는 LiPON 박막 그리고 음극 물질로는 리튬 금속 박막을 선택하여 $Li/LiPON/V_2O_5/Pt$ 구조의 전고상 박막 전지를 제작하였고 전지 특성을 평가하였다. 산화바나듐 박막은 여러 산소 분압에서 직류 반응성 스퍼터링으로 증착하여 전기화학적 특성을 분석한 결과 $20\%\;O_2/Ar$비에서 가장 우수한 가역 특성을 나타내었다. 직류 반응성 스퍼터링에 의해 산화바나듐 박막을 제작한 후 진공을 그대로 유지한 상태에서 r.f. 반응성 스퍼터링에 의해 LiPON 고체전해질 박막을 증착하였다. 그 후 dry room내에서 진공 열증착법에 의해 리튬 금속 박막을 증착하여 전고상의 박막 전지를 제작하였다. $Li/LiPON/V_2O_5$ 박막 전지를 전압 범위와 전류 밀도를 변화시켜 충방전 시험을 행한 결과 $7{\mu}A/cm^2$의 전류 밀도와 3.6-2.7 V의 전압범위에서 가장 우수한 가역 특성을 나타내었다. $Li/LiPON/V_2O_5$박막 전지로 초시계를 구동 시켰으며 이는 in-situ공정에 의해 제작된 박막 전지가 소자 에너지원으로의 응용 가능성을 보여 주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.40-44
• /
• 2019

In this study, the effects of the compaction method for (Mg+2B) powders on the apparent density and superconducting properties of $MgB_2$ bulk superconductor were investigated. The raw powders used in this study were nano-sized boron (B) and spherical magnesium (Mg). A batch of a powder mixture of (Mg+2B) was put in a steel mold and uniaxially pressed at 1 ton or 3 tons into pellets. Another batch of the powder mixture was uniaxially pressed at 1 ton and then pressed isostatically at $1800kg/cm^2$ in the water chamber. All pellets were heat-treated at $650^{\circ}C$ for 1 h in flowing argon gas for the formation of $MgB_2$. The apparent density of powder compacts pressed at 3 ton was higher than that at 1 ton. The cold isostatic pressing (CIP) in a water chamber allowed further increase of the apparent density of powder compacts, which influenced the pellet density of the final products ($MgB_2$). The compaction methods (uniaxial pressing and CIP) did not affect the formation of $MgB_2$ and superconducting critical temperature ($T_c$) of $MgB_2$, but affected the critical current density ($J_c$) of $MgB_2$ significantly. The sample with the high apparent density showed high $J_c$ at 5 K and 20 K at applied magnetic fields (0-5 T).

• 전기학회논문지
• /
• 제57권5호
• /
• pp.808-815
• /
• 2008

The composites were fabricated 61[vol.%] ${\beta}$-SiC and 39[vol.%] $TiB_2$ powders with the liquid forming additives of 8, 12, 16[wt%] $Al_2O_3+Y_2O_3$ as a sintering aid by pressureless annealing at 1650[$^{\circ}C$] for 4 hours. The present study investigated the influence of the content of $Al_2O_3+Y_2O_3$ sintering additives on the microstructure, mechanical and electrical properties of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), ${\beta}$-SiC(3C), $TiB_2$, and In Situ YAG($Al_2Y_3O_{12}$). The relative density of SiC-$TiB_2$ composites was lowered due to gaseous products of the result of reaction between SiC and $Al_2O_3+Y_2O_3$. There is another reason which pressureless annealed temperature 1650[$^{\circ}C$] is lower $300{\sim}450[^{\circ}C]$ than applied pressure sintering temperature $1950{\sim}2100[^{\circ}C]$. The relative density, the flexural strength, the Young's modulus and the Vicker's hardness showed the highest value of 82.29[%], 189.5[Mpa], 54.60[Gpa] and 2.84[Gpa] for SiC-$TiB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature. Abnormal grain growth takes place during phase transformation from ${\beta}$-SiC into ${\alpha}$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. The electrical resistivity showed the lowest value of 0.0117[${\Omega}{\cdot}cm$] for 16[wt%] $Al_2O_3+Y_2O_3$ additives at 25[$^{\circ}C$]. The electrical resistivity was all negative temperature coefficient resistance (NTCR) in the temperature ranges from $25^{\circ}C$ to 700[$^{\circ}C$]. The resistance temperature coefficient of composite showed the lowest value of $-2.3{\times}10^{-3}[^{\circ}C]^{-1}$ for 16[wt%] additives in the temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$].

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.15-18
• /
• 2011

We have studied the $TiO_2$ doping effects on the flux pinning behavior of an $MgB_2$ superconductor synthesized by the in-situ solid-state reaction. From the field-cooled and zero-field-cooled temperature dependences of magnetization, the reversible-irreversible transition of $TiO_2$-doped $MgB_2$ was determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). For comparison, the similar measurements are also obtained from SiC-doped $MgB_2$. The critical current density was estimated from the width of hysteresis loops in the framework of Bean's model at different temperatures. The obtained results manifest that nano-scale $TiO_2$ inclusions served as effective pinning centers and lead to the enhanced upper critical field and critical current density. It was concluded that the grain boundary pinning mechanism was realized in a $TiO_2$-doped $MgB_2$ superconductor.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.137-145
• /
• 2012

Sand is one of the essential materials used for social infrastructure construction such as embankment, landfill and backfill. It was known that mechanical properties and shear strength of sand are closely related to relative density. Therefore it is very important to determine accurate relative density. In this study, Portable Cone Penetration Tester (PCPT) was used to estimate the relative density and the internal friction angle of sand. PCPT cone-tip resistance ($q_c$) was measured changing the relative density of the two soil samples.Standard sand (JMJ) and Busan sand (BS). Also, a direct shear test was performed to investigate relationship between relative density and internal friction angle. The size and shape of soil particles were confirmed by using Scanning Electron Microscope (SEM). As a result, the log value of $q_c$ was linearly correlated with relative density and internal friction angle. In particular, the internal friction angle of BS sample was greater than that of JMJ, which was due to difference of the shape and mean size of particles. This result shows that it is important to determine the shape and size of particles as well as relative density to define mechanical property of sand. Through this study, it can be more effectively and conveniently to investigate relative density and shear strength of sand by using PCPT in situ.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.40-44
• /
• 2008

A combined process of a mechanical ball milling and liquid glycerin ($C_{3}H_{8}O_3$) treatment of boron (B) powder has been conducted to enhance the superconducting properties of $MgB_2$. The individual aims of the mechanical milling and the glycerin treatment were to reduce the grain size of the $MgB_2$ and to achieve homogeneous carbon (C) incorporation into the $MgB_2$, respectively. Four kinds of B powders of as-received, glycerin treated, 2 h milled, and 2 h milled + glycerin treated were prepared. $MgB_2$ bulks were fabricated by in situ process using the prepared B powders. The mechanical ball milling was effective for a grain refinement, and a lattice disorder was easily achieved by glycerin addition. It was found that the critical current density ($J_c$) values were enhanced in the samples with milled B or glycerin treated B only. In the $MgB_2$ bulk prepared with both milled and glycerin treated B, the $J_c$ was further increased due to a higher grain boundary density and a greater C substitution.

• 수산해양기술연구
• /
• 제53권2호
• /
• pp.152-159
• /
• 2017

Rockfish was a commercially important fish specie in marine ranching areas in Korea. To estimate density and biomass of rockfish using acoustic method, target strength (TS) information is required on the species. This study measured TS dependence on tilt angle and size on 14 live rockfish individuals at 38, 70, and, 120 kHz by ex-situ measurement (tethered method) and acoustic scattering model (Krichhoff ray mode, KRM). The swimbladdered angle ranged from 18 to $30^{\circ}$ ($mean{\pm}s.d.=26{\pm}4^{\circ}$). The mean TS for all individuals was highest -35.9 dB of tilt angle $-17^{\circ}$ at 38 kHz, -35.4 dB of tilt angle $-25^{\circ}$ at 70 kHz, and -34.9 dB of tilt angle $-22^{\circ}$ at 120 kHz. The ex-situ TS-total length (TL, cm) relationships were $TS_{38kHz}=20log_{10}(TL)-67.1$, $TS_{70kHz}=20log_{10}(TL)-68.6$, and $TS_{120kHz}=20log_{10}(TL)-69.9$, respectively. The model TS-total length (TL, cm) relationships were $TS_{38kHz}=20log_{10}(TL)-66.4$, $TS_{70kHz}=20log_{10}(TL)-67.0$, $TS_{120kHz}=20log_{10}(TL)-67.0$. The two measurements between the ex-situ TS and KRM model for TS-tilt angle and fish size were found to be significantly correlated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.216-216
• /
• 2003