• 제목/요약/키워드: In-situ Test

검색결과 1,147건 처리시간 0.023초

In-situ 소음투과손실 측정 및 검증을 위한 기법 개발 (New Method for Measurement and Validation of In-situ Sound Transmission Loss)

  • 이화수;박홍철;윤성호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.795-800
    • /
    • 2008
  • The sound transmission loss is a key index to evaluate the acoustic performance of a car-body structure at the high frequency range. From this paper, a new validation method for in-situ sound transmission loss is proposed. First, in-situ sound transmission loss is measured by using PU intensity probe on the condition of complete vehicle. Second, validation test, which is consisted of internal, external and total frequency response function test, is performed by using volume acceleration source and microphones. Then, these test results are compared to validate the accuracy of in-situ sound transmission loss. Finally, the test result of in-site method is compared with results of two reverberant room test method and SEA analytical method. The reliability of in-situ method is confirmed by these procedures.

  • PDF

생석회파일에 의한 연약지반개량효과 (The Improvement Effects of Soft Ground by Quick Lime Pile)

  • 천병식;고갑수;장은석;임지섭;이용한
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1999년도 춘계학술대회 논문집
    • /
    • pp.383-389
    • /
    • 1999
  • This paper is a study on the improvement effects by quick lime pile through theoretical analysis and in-situ construction test. Effects of strength increase is studied to verify the improvement effects of soft ground arounding quick lime pile. First, engineering characteristics of quick lime and ground was studied, in the second place, laboratory test(consolidation test, triaxial compression test) and in-situ test(portable cone penetration test, vane test) were peformed for verification of strength increase of adjacent ground. Finally, the results of in-situ test were compared with those of theorecal study. From in-situ test results, strength at 28th curing days(6.11-6.55t/㎡) was twice as great as strength before improvement(3.06t/㎡) and was slightly greater than theoretical value(4.95t/㎡).

  • PDF

원위치 시험 성과에 의한 액상화 발생가능성 평가에 관한 연구 (A Study on Evaluation of Liquefaction Potential Using in Situ Test Data)

  • 허정우;김찬홍;박성재;정경환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.477-484
    • /
    • 2001
  • In this paper shows the evaluation of the liquefaction potential of soils using in situ test. There are different types of in situ test used in the evaluation the liquefaction potential. In the particular study the Standard penetration test(SPT), Cone penetration test(CPT), ad Seismic cone penetration test (SCPT) were used. The SPT N value has been used all over for a very long time. The evaluation of the liquefaction of soil was preformed using the worldwide renowned CPT and SCPT. Shake 91 program was used to evaluate the results obtained by different in situ test and were later analyzed.

  • PDF

현장직접전단시험기의 개발 및 현장적용에 관한 연구 (Development of an In Situ Direct Shear Test Apparatus and Its Field Application)

  • 김용필;이영균;이성국;엄정기
    • 터널과지하공간
    • /
    • 제21권3호
    • /
    • pp.181-191
    • /
    • 2011
  • 단층대, 파쇄대 또는 풍화대가 발달한 암반은 실내시험을 위한 시료 성형이 어렵다. 기존에 현장에서 수행된 직접전단시험은 갱도 내벽의 수직반력을 이용하여 수행되었다. 이 연구에서 개발된 현장직접전단시험기는 터널내부 또는 노천의 현장상태 암반에서 시험을 수행할 수 있다. 현장직접전단시험기의 주요 구성은 전단하중 반력판 및 하중전달판, 유압실린더 시스템, 로드셀, 다단계 전단상자, 전단상자 고정장치, 수직하중 반력판 및 하중전달판, 마찰저항 감소용 롤러 등이다. 공시체는 각주형의 블록으로 최대 크기는 $400{\times}400{\times}460$ mm이며 현장에서 형성하는 방법 및 절차가 제시되었다. 개발된 시험기의 현장적용성 평가를 위하여 연구지역에 대한 지질공학적 조사 분석 연구를 통하여 성능시험을 위한 공시체 형성에 적합한 위치가 선정되었다. 현장적용 결과 개발된 현장용 시험기는 암석의 강도 및 변형과 관련하여 필요한 대부분의 정보를 제공할 수 있는 성능을 확보하였음을 확인하였다.

나선심사시험에 의한 지반조사기법 (Soil Investigation by Helical Probe Test)

  • 정구영
    • 한국지반공학회지:지반
    • /
    • 제3권4호
    • /
    • pp.31-40
    • /
    • 1987
  • 얕은 지반의 현장탐사와 다짐도의 측정등에 적합한 나선탐사시험을 개발하여 그 시기결과를 표준 관입시험, 도추관입시험, 현장밀도시험 등 기존의 현장시험결과와 비교, 분석하였다. 나선탐사설험은 다른 현장시광에 비하여 경제적이며 1인이 쉽게 시험할 수 있는 장점이 있다. 흙의 물성치는 택 사기를 지반에 관입시키는데 필요한 토오크로 나타내며 본 연구결과, 표준관입시험 및 원유관입시 험의 결과와 잘 일치하고 표준관입시험과의 상관관계는 흙의 종류에 따른 유관성이 낮으나 도유관 입시험과의 경우, 유관성이 높다. 또한 나선탐사시험은 상대다짐또와 다짐지반의 현장밀도의 측정 에도 정도가 높다. 한펀 지반의 평균정립(D50)이 증가함에 따라 나선탐사시험의 역포전비는 감소하는 특성을 보인다.

  • PDF

성토사면에 타설된 현장 콘크리트 말뚝의 강도특성에 미치는 성토재료 및 타설 방법에 대한 영향 (Effect of Strength Properties of In-Situ Concrete Pile in Embankment Slopes on Embankment Materials and Boring Methods)

  • 황무석;정재훈;박승기;이창수;박찬기
    • 한국농공학회논문집
    • /
    • 제50권5호
    • /
    • pp.73-81
    • /
    • 2008
  • This study evaluated the applicability of in-situ concrete pile as a stabilization materials of embankment slopes including agricultural reservoir and rural road etc. The experimental embankment slopes was constructed to investigate the strength properties of in-situ concrete pile with embankment materials and boring methods. The test variable were applied the boring method(driving and augering) and water-cement ratio. In order to analyze the physical and mechanical properties of embankment materials, permeability and water contents test were was performed. Also, the freshly and harden of in-situ concrete properties were measured by the slump and compressive strength tests. The results showed the water content and permeability of embankment materials and boring methods affected on compressive strength of in-situ concrete pile.

노상 및 보조기층의 소형충격재하시험 활용방안 연구 (A Study for Application of the Light Falling Weight lest on Subbase and Subgrade)

  • 최준성;김종민;한진석;김부일
    • 한국도로학회논문집
    • /
    • 제11권2호
    • /
    • pp.85-98
    • /
    • 2009
  • 현재, 포장시스템의 노상과 보조기층의 다짐관리는 들밀도 시험을 이용한 상대 다짐도와 평판재하시험이 널리 쓰이고 있다. 하지만, 이 두 시험법은 노상과 보조기층의 다짐관리를 평가하기엔 시간과 비용이 많이 소요되며 실측 값을 얻기에도 매우 어렵다. 이에 본 연구에서는 노상과 보조기층 시공 현장에서 다짐관리를 보다 빠르고, 적은 비용으로 측정 할 수 있는 소형충격재하시험들의 비교분석을 실시한 후, LFWD시험을 다짐평가장비로 제안하였다. 또한, 노상과 보조기층의 실내시험 및 현장 시험을 통하여 국내 도로 하부구조 재료 특성에 따른 $E_{LFWD}$와 상대 다짐도, $K_{30}$, 설계 $M_{R}$ 값과의 상관관계를 제안하였다.

  • PDF

비배토 현장타설 콘크리트 말뚝의 지지력 산정에 관한 연구 (Bearing capacity Calculation of Displacement in-situ Concrete Pile)

  • 박종배;박태순
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 말뚝기초 학술발표회
    • /
    • pp.65-84
    • /
    • 2000
  • Europe and US which have more restrictive regulations than Korea about the noise and vibration during construction are using Auger-cast Pile to reduce the problem relating with noise and vibration. However Auger-cast Pile has problems like difficult quality control and low bearing capacity. In Europe, Displacement in-situ concrete Pile has been used to sove that problems since 1990s, and Korea has performed the test construction in 1997 and it has been used as the real structural foundation since 1998. Test and real construction results verified that the allowable capacity of the pile(diameter = 410mm) is between 70 and 100ton. Though De Beer & Van Imps design method utilizing CPT result is used to calculate the bearing capacity of the Displacement in-situ Pile, Korea is dependant upon the SPT as the sounding test, so design method utilizing SPT result is necessary to promote the application of the pile. To find out reasonable design method using SPT result, rearing capacity of the pile constructed in sand and clay in Korea was calculated using Meyerhof, SPT-CPT translation method, Nordlund, Douglas and DM-7 method, and the calculation results were compared to the load test result. Analysis result shows that SPT-CPT translation method is more reliable than others and economical design can be possible because it considers efficiently the friction capacity of Displacement in-situ Pile.

  • PDF

진동치환 스톤칼럼공법에 의한 액상화 저감 효과 (Reduction Effect of liquefaction by Vibro-Replacement Stone Columns)

  • 이송;채점식;박상국
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2001년도 춘계학술대회 논문집
    • /
    • pp.443-450
    • /
    • 2001
  • This paper shows the reduction effect of tile earthquake-induced liquefaction potential of soils that improved by Vibro-Replacement Stone Columns. The Vibro-Replacement Stone Columns method transforms soft cohesive soils into a composite mass of compacted granular or crushed stone columns by using vibrating equipment and water jets. This study investigated and analyzed the behavior of the stone columns and composite ground using the results of in situ test and measurement at the job-site. This paper shows the evaluation of the earthquake-induced liquefaction potential of soils using in situ test. There are different types of in situ test used in the evaluation the liquefaction potential. In the particular study the Standard penetration test, and Cone penetration test were used. The N value of Standard Penetration test has been used all over for a very long time. The evaluation of the liquefaction of soil was performed using the worldwide renewed Cone penetration test

  • PDF

암반 분류 기초 물성조사 (Basic properties survey report on the rock classification)

  • 허진
    • 화약ㆍ발파
    • /
    • 제9권3호
    • /
    • pp.10-16
    • /
    • 1991
  • On the ground foundation works for Bldg site, Rock classification test can be obtained as follows due to the International Society for Rock Mechanics. 1. In-situ test : Compressive strength, Point load test. 2. In-situ test Schmidt hammer test. Burden test finaly the convinient co-relation table between strength and 5. H, test were carried out for site-engineer, This project is one of contineous works regarding to Burden test from Jack leg drill($\phi{\;}75mm$) use.

  • PDF