• KSBB Journal
• /
• v.18 no.5
• /
• pp.418-423
• /
• 2003

A laboratory jar fermenter was modified to measure the duration for cooling water supply and the temperatures of the coolant at the inlet and outlet of water jacket. Successful operation of temperature control and on-line measurement was achieved by adjusting optimum parameters of the Proportion-Integral-Derivative temperature controller. The variables measured on-line were used to estimate cooling rates from empirical equations comprised of the time period of cooling water supply and the temperatures of coolant. The measured cooling rate showed a good correlation to the specific growth rate during batch cultivation of E. coli. Cooling rate was measured and applied to programmed cell growth in a fed-batch cultivations. Three fed-batch cultivations were demonstrated by feeding substrate to follow the programmed cooling rates increasing exponentially.

• Membrane Journal
• /
• v.9 no.3
• /
• pp.141-150
• /
• 1999

A novel permeation apparatus was developed which could make the on-line measurements of both flux transient and permeate composition in gas permeation. The measurement by using the per¬meation apparatus was based on the continuous-flow technique. The transient measurement allowed the simultaneous determinations of permeation characteristics, such as, permeability, diffusion and solubility coefficients, and activation energies only with one experiment. The apparatus performance was illustrated by conducting the permeation of pure gases through two glassy polyimides and a rubbery poly (dimethyl¬siloxane) membranes, respectively. A comparison of the permeation characteristics determined from the flux transients was made with the literature values for verifying the confidence and accuracy of the measurement. Also, the analysis of the permeation transients obtained was carried out for the close investigation of the permeation behaviors of gases through membrane.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.155-156
• /
• 2007

This paper presents the vision-based camber and optimal cutting line detection algorithm for hot-rolling process. It is important to measure the camber of head and tail part of strips because many problems are caused by the camber in the hot-rolling process. The hot-rolling process has time constraints. The camber detection algorithm of head and tail parts requires fast and less complex for satisfying time constraints. The proposed algorithm consists of two parts: measurement of the camber in the head and tail part of strips and decision part of the optimal cutting line of hot-rolled strip. First, we obtain the camber value of the strip from the difference between the real center line and the center line of head, tail part. Second, the head and tail part of strips isn't suitable for strips connections. Therefore, the cutting process is needed in the hot-rolling process. The optimal cutting line is determined by the head and tail images obtained from cameras. The algorithm is applied into the vision system with two area cameras, Matrox image processing board and host PC for verification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2555-2560
• /
• 1996

Inspecting the dimensional accuracy of a car-body in assembly line is a very important process to assure high productivity. Now there exist two common inspecting methods in practice. One is to measure a sampled car-body with three dimensional measuring machine, and the other is to measure car-body with three dimensional measuring machine, and the other is to measure car-body in assembly line using many sensors fixed to a large jig frame. The formal method takes too long to inspect a sampled car-body of a same sort, and cannot therefore give an useful error trend for the whole production. On the other hand, the latter lacks flexibility and is very cost-intensive. By using industrial robots and sensors, an in-line Car-Body Measuring(CBM) system which ensured high flexiblity and sufficient accuracy was developed. This CBM cell operates in real production line and measures the check points by the non-contact type using camera and laser displacement sensor(LDS). This system can handle about 15 Measuring points within a cycle time of 40 seconds. A process computer controls whole process such as data acquisition file handling and data analysis. Robot arms changes in length due to ambient temperature fluctuation affecting the measuring accuracy. To compensate this error, a robot arm calibration process was developed.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.89-100
• /
• 2001

The major purpose of this study is to show exact and convenient devices and minimize error in body measurement. This study was referred to 13 records and compared 6 items that the investigator's opinion has been differed about anthropometric point and line and suggested convenient and radical device, and measured by if need be. The 30 students from 20 to 25 ages were measured and data was analyzed by mean, std. deviation and paired t-test. The results are as follows. 1. Side neck point has been suggested many devices, but was suggested in this study to decide by M. trapezius, cervicale point and fossa jugularis point. 2. Shoulder point was suggested to decide by point of 1/2 armhole depth, upper arm depth and shoulder depth except acromion point. 3. Waist circumference line has been differed between horizontal line and natural line. The result of measurements was no significant difference between two methods and natural line was convenience. Waist circumference line must considered two methods together for garment construction and somato type. 4. The standard of hip circumference line has been differed between buttock point and trochanterion point. The result of measurements was significant difference between two methods, but two point must considered together because of body type. 5. Chest circumference line at scye has been differed between horizontal line and natural line. The result of measurements was significant difference between two methods and natural line was convenience. Chest circumference line at scye must studied to decide method the line for garment construction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.12-17
• /
• 2010

The oil tanker ship over 150GRT must equip oil content meter which satisfy requirements of revised MARPOL 73/78. Online measurement of oil content in complex samples is required to have fast response, continuous measurement, and satisfaction of ${\pm}10ppm$ or ${\pm}10%$ error in this field. The research of this paper is to develop oil content measurement system using analysis of light transmission and scattering among turbidity measurement methods. Light transmission and scattering are analytical methods commonly used in instrumentation for online turbidity measurement of oil in water. Gasoline is experimented as a sample and the oil content approximately ranged from 14ppm to 600ppm. TSK Fuzzy Model may be suitable to associate variously derived spectral signals with specific content of oil having various interfering factors. Proposed Parallel TSK Fuzzy Model is reasonably used to classify oil content in comparison with other models. Those measurement methods would be effectively applied and commercialized to oil content meter that is key components of oil discharge monitoring control equipment.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1957-1959
• /
• 2000

The PD measurement method is very useful to detect insulation degradation. Recently, the HFPD(High Frequency Partial Discharge) measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires in-service diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In this study, simulated transformer is manufactured and HFPD occurred from simulated transformer is measured with broad band antenna and active-line RF measurement system in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages. Also the PD pattern which was measured with EMC analyzer and RF measurement system is compared.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.435-436
• /
• 2009

In this paper, the absorption line of $NH_3$ is investigated by photoacoustic effect. And then an experiment with CO2 laser is conducted to demonstrate a method of measuring the intensity of NH3 using absorption line.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.387-389
• /
• 2006

This paper describes new on-line small signal stability assessment and its application using the time series simulated phasor measurement data. Using FFT technique and optimization method, the suggested method can effectively identify all of mode frequencies involved in measured data and calculate the damping ratio with accuracy.