• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.415-418
• /
• 1995

This paper describes a new technique for thickness measurement of a very thin layer less than one-quarter of the wavelength of ultrasonic wave using ultrasonic pulse-echo method. The technique determines the thickness of a thin layer in a layered medium form the amplitudes of the total reflected waves from the back side layer of interst. Thickness of a very thin layer few inch deep inside the media can be measured without using a very high frequency ultrasonic transducer over 100MHz which must be used in the conventional techniques for the precision measurement of a thin layer. The method also requires no inversion process to extract the thickness from the waveform of the reflected waves, so that it makes possible on-line measurement of the thickness of the layer.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.69-78
• /
• 2018

This paper presents a precise edge detection algorithm for the critical dimension (CD) measurement of a Thin-Film Transistor Liquid-Crystal Display (TFT-LCD) pattern. The sigmoid surface function is proposed to model the blurred step edge. This model can simultaneously find the position and geometry of the edge precisely. The nonlinear least squares fitting method (Levenberg-Marquardt method) is used to model the image intensity distribution into the proposed sigmoid blurred edge model. The suggested algorithm is verified by comparing the CD measurement repeatability from high-magnified blurry and noisy TFT-LCD images with those from the previous Laplacian of Gaussian (LoG) based sub-pixel edge detection algorithm and error function fitting method. The proposed fitting-based edge detection algorithm produces more precise results than the previous method. The suggested algorithm can be applied to in-line precision CD measurement for high-resolution display devices.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.476-481
• /
• 1999

This paper describes a new technique for measurement of the displacement less than one-quarter of the wavelength of ultrasonic wave using ultrasonic pulse-echo method. The technique determines the displacement of a journal bearing from the amplitudes of the total reflected waves from the surface of journal inside the bearing. Vibration of journal bearing can be measured without using a very high frequency ultrasonic transduce over 100MHz which must be used in the conventional techniques for the precision measurement of a small displacement. The method also requires no inversion process to extract the thickness from the waveforms of the reflected waves, so that it makes possible on-line measurement of the vibration of journal bearing.

• 한국전문물리치료학회지
• /
• 제12권4호
• /
• pp.41-47
• /
• 2005

The purpose of this study was to determine the intra-rater and inter-rater reliability of various forward head posture measurements. Ten healthy adults (age, $20.4{\pm}2.2$ yrs; height, $164.0{\pm}5.5$ cm; weight, $58.7{\pm}7.3$ kg) participated in the study. They were free of injury and neurologic deficits in the upper extremities and neck at the time of testing. The subjects were asked to perform head forward posture by under the guidance of physical therapists. Markers were placed on the C7 spinous process, mastoid process, tragus of the ear, outer canthus, and forehead. Measurement 1 for forward head posture assessment was measured as the angle between the horizontal line through C7 and the line connecting the C7 spinous process with the tragus of the ear. Measurement 2 was measured as the angle between the C7 spinous process, the mastoid process and the outer canthus. Measurement 3 was measured as two kinds of angles the HT (head tilt) angle is between the line from the midpoint of forehead to the tragus line and Y-axis at the tragus point. The NF (neck flexion) angle is between the line from the tragus to the C7 line and the Y-axis at the C7. Intra-rater, inter-rater reliability and coefficient of variation was assessed by comparing the measured values from three kinds of measurements of forward head posture. The intra-rater reliability was indicated by intraclass correlation coefficients [ICC(1,1)] and inter-rater reliability was shown by intraclass correlation coefficients [ICC(3,k)]. The results of study were as follows: ICC(1,1) values for intra-rater reliability of three measurements were in the 'excellent' category. ICC(3,k) values for inter-rater reliability of three measurements were also in the 'excellent' category. The coefficient of variation of method 2 had a lower value than method 1 and method 3. This data means that the measured value of method 2 was less scattered. Further research is needed to determine whether the validity of all measurements is revealed in the 'excellent' category.

• 한국전자파학회논문지
• /
• 제22권5호
• /
• pp.545-551
• /
• 2011

본 논문에서는 WCDMA 기지국에서 방사되는 유효 등방성 복사 전력(EIRP)을 가시선 환경에서 pilot 채널을 이용하여 측정하는 방법을 기술하였다. 특히, 국내 기지국 검사에 적용될 수 있도록 실제 운용 중인 기지국을 대상으로 측정하였다. 측정된 결과와 Friis 전송 공식에 의해 추정된 EIRP 예측값과 송신 안테나 정보를 이용한 EIRP 계산값을 비교한 결과, -2 dB의 편차를 갖는 결과를 얻었다. 이러한 -2 dB 편차는 실험용 기지국 안테나로 확인한 결과, 편파 부정합에 의한 것으로 판별되어 제거할 수 있음을 확인하였다. 본 측정 방법을 활용하면 WCDMA 기지국 검사 시 기존의 공중선 전력으로 검사하는 방법 이외에 EIRP를 직접 측정하여 검사할 수 있다.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.1-10
• /
• 2024

실내 로비 환경에서 다중 경로에서 6, 10, 17 GHz 주파수 대역의 전파 특성을 분석하였다. 가시선(Line-of-sight, LOS) 및 비가시선(Non-line-of-sight, NLOS) 경로는 송신 안테나 위치에서 수신 안테나 위치까지 2-16 m (0.5 m 간격) 거리에서 측정되었다. 기본 전송 손실은 경로에 해당하는 FI(Floating intercept) 경로 손실 모델을 사용하여 세 가지 매개변수를 비교하였다. RMS(Root mean square) 지연 확산은 측정 결과를 누적 확률 10, 50, 90%로 비교하였다. 기둥의 존재와 특이한 로비 구조로 인해 측정된 모든 주파수에서 전파 손실과 전파 지연이 발생하였다. 이에 실내 로비 환경에 대한 측정 시나리오와 표준 측정 데이터 제공을 제안하였다. 이를 통해 다양한 구조의 실내 로비 환경에서 5G 및 밀리미터파 대역의 전파 특성에 대한 연구에 기여할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.239-243
• /
• 1990

This paper presents a algorithm to improve accuracy and reliability in state estimation of contaminated bad data. The conventional algorithms for detection of bad data confront the problems of excessive memory requirements and long computation time. In order to overcome measurement compensation approach is proposed to reduce computation time and partitioned measurement error model has the advantage of remarkable reduction in computation time and memory requirements in estimated error computation. The proposed algorithm has been tested for IEEE sample systems, which shows its applicability to on-line power systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.26-28
• /
• 2001

This paper discussed for harmonic analysis of 154kv system in Kwangyang steel works. The harmonic modelings are developed by harmonic measurement for scores of days in a 154kv substation at a same time. In this paper, the measurement values of harmonic are compared to the analysis results in incoming line. Case studies are presented to predict harmonic distortion of the future system.

• 대한전기학회논문지
• /
• 제40권2호
• /
• pp.144-153
• /
• 1991

This paper presents an algorithm to improve accuracy and reliability in the state estimation of contaminated bad data. The conventional algorithms for detection of bad data have the problems of excessive memory requirements and long computation time. In order to overcome these problems, a measurement compensation approach is proposed to reduce computation time, and the partitioned measurement error model has the advantage of remarkable reduction in computation time and memory requirements in estimated error computation. The proposed algorithm has been tested for IEEE sample systems, which shows its applicability to on-line power systems.

• 산업공학
• /
• 제16권spc호
• /
• pp.111-115
• /
• 2003

Railroad system is consisted of resources of rail track, signal system, and vehicles. Railway operation must use these limited resources and maximize resource utilization. Line capacity(number of trains throughput/day) is determined by such as parameters, line utilization rate($\alpha$), dummy rate for the break-through hour($\beta$), and dummy rate for the number of rail track intervals($\delta$). Line capacity simulation(LCS) determined the line capacity through simulation given $\alpha$, $\beta$, and $\delta$. This paper deals with the development of parameter evaluation simulation(PES). PES presents the decision maker with the relationship of line capacity and measurement of robustness for various scenarios in different parameters and then the decision maker can determine the appropriate parameters.