• 영어영문학
• /
• 제56권6호
• /
• pp.1135-1161
• /
• 2010

The interpretations of degree expressions require the postulation of new entities to represent degrees. Diverse entities such as degrees, intervals, and vectors are adopted for degree expressions. Positive degree sentences and questions are properly construed with the introduction of these entities, but their negative counterparts need more consideration. Negative degree sentences show dual patterns of entailments depending on contexts, and negative degree questions are unacceptable, making weak islands. To explicate the distinct nature of negative degree sentences and questions, Fox & Hackl (2006) provide an analysis based on degrees while Abrusan & Spector (2010) suggest a proposal in interval readings of degree expressions. I have pointed out the theoretical problems of these analyses and proposed an alternative in the framework of the vector space semantics, following Winter (2005). Bi-directional scales in vector space fit well with the dual patterns of negative degree sentences, and the notion of a reference vector is useful to accommodate the contextual influence in negative degree sentences and to deal with the unacceptability of negative degree questions.

• 대한치과교정학회지
• /
• 제16권2호
• /
• pp.123-133
• /
• 1986

The purpose of this study was to collect the information of the straight-wire appliance and to determine the amount of second-order bends in clinical orthodontics. The author analysed the study model of 50 individuals with normal occlusion and results were obtained as follows. 1. The crown angulation was 4 degree in upper central incisor, 7 degree in upper lateral incisor, and 0 degree in lower central incisor and lateral incisor. 2. The crown angulation was 8 degree in upper cuspid and 2 degree in lower cuspid. 3. The crown angulations were 4 degree in upper first bicuspid, upper second bicuspid and lower second bicuspid and 1 degree in lower first bicuspid. 4. The crown angulation was 3 degree in upper first molar, 0 degree in upper second molar, 5 degree in lower first molar and 8 degree in lower second molar. 5. The crown angulations in lower arch were progressively increased from first premolar to second molar. 6. In upper arch, as the crown angulation of one tooth was increased, those of adjacent teeth were increased, too. 7. In the case of lower arch, the crown angulation of cuspid was increased as that of lateral incisor was increased, the crown angulation of second premolar was increased as that of first premolar was increased, and similarity the crown angulation of second molar was increased as that of first molar was increased.

• 한국환경복원기술학회지
• /
• 제3권3호
• /
• pp.1-7
• /
• 2000

The aim of the work described in this paper is to study the shear characteristics of the weathered granite soil. To this end, a series of consolidated undrained triaxial compression tests are carried out to investigate the shear parameters-cohesion and internal friction angle for the degree of saturation and degree of weathering. From the results, it is found that the shear parameters of weathered granite soil are influenced on the degree of saturation, degree of weathering and disturbance. Especially, internal friction angle is more influenced on the upper factors than cohesion. And shear parameters are more acted on the degree of saturation than the degree of weathering in the test range. It is, therefore, recommended that must be considered the conditions of granite soil-degree of saturation, degree of weathering and disturbance etc-in case of the calculation of bearing capacity, stability analysis and other designs with shear parameters.

• 대한지구과학교육학회지
• /
• 제4권3호
• /
• pp.218-230
• /
• 2011

The aim of this current study is to survey and analyze the degree of concern and difficult of elementary school teachers in elementary school science classes, and providing the results to teachers as a basic reference to improve their scientific specialties. As a result, firstly, the degree of concern of elementary school teacher in science class is more than normal level. Secondly, the degree of concern in science class differs dependent on environmental factors. Next, the degree of difficulty about science class was under normal level. Among area surveyed, physical and psychological environment were lower compared with other areas, and the difficulty in evaluation of class result was comparably higher than others. At fourth, teacher's degree of difficulty in science class was dependent on environment factors, but not on gender. Finally, there was reverse correlation between degree of concern and the degree of difficulty of elementary school teachers in science class. Further, the degree of concern in student knowledge showed more significant reverse correlation with all of area tested.

• 가족자원경영과 정책
• /
• 제2권1호
• /
• pp.15-31
• /
• 1998

The purpose of study is to understand the home management strategy to cope with rapid changing environments and to verify that how personal value orientation affect home management strategy. The research results are summarized below. First, variables that affect the value orientation of Korean urbanite are sex, area of dwelling, degree of information using and degree of stress recognition in case of material orientation, degree of information using in case of environmental orientation, academic career, sex, degree of information using, degree of stress recognition in cases of fate control orientation, number of children, sex, degree of information using in case of equilibrium orientation, sex, degree of stress recognition in case of present orientation and academic career, degree of stress recognition in case of individualistic orientation. Second, value orientation variables that affect overall home management strategy of Korean urbanite are material orientation, environmental orientation, fate control orientation and individualistic orientation. Third, variables that affect overall home management strategy of Korean urbanite are age, academic career, degree of information using, degree of stress recognition, perception level of living relative to others, environmental orientation and fate control orientation and it is shown that degree of information using is domineering variable.

• 가족자원경영과 정책
• /
• 제2권2호
• /
• pp.1-19
• /
• 1998

The purpose of study is to understand the home management strategy to cope with rapid changing environments and to verify that how personal value orientation affect home management strategy. The research results are summarized below. First, variables that affect the value orientation of Korean urbanite are sex, area of dwelling, degree of information using and degree of stress recognition in case of material orientation, degree of information using in case of environmental orientation, academic career, sex, degree of information using, degree of stress recognition in cases of fate control orientation, number of children, sex, degree of information using in case of equilibrium orientation, sex, degree of stress recognition in case of present orientation and academic career, degree of stress recognition in case of individualistic orientation. Second, value orientation variables that affect overall home management strategy of Korean urbanite are material orientation, environmental orientation, fate control orientation and individualistic orientation. Third, variables that affect overall home management strategy of Korean urbanite are age, academic career, degree of information using, degree of stress recognition, perception level of living relative to others, environmental orientation and fate control orientation and it is shown that degree of information using is domineering variable.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.89-100
• /
• 2003

In this research was to analyze 3-D kinematics variables for handspring of basic motion in the heavy gymnastics in order to investigate kinematical difference between expert and novice. Therefore, the purpose of this research was provide quantitative information, systematic provision, rules, establishment of basic skill for improving skill and teaching athletes. And in the research, results were as followings. 1. In the time variables, total time was that expert took 0.745sec and novice took 0.829sec, and as duration time of each event, expert was faster than novice in the all motion event except till second event of the preparation motion. 2. In the center of body variables, vertical direction variables, the displacement of body center hight was that expert showed 61.26% and novice showed 54.48% in the third event of all motion, also all event were showed expert was higher displacement than novice except first of event in preparatory stage. 3. In the angle displacement of main joint, the right direction was that expert showed 154.12degree and novice showed 174.85degree and the left direction was that expert showed 159.29degree and novice showed 171.46degree In the second event of main joint curved point at the same time hand was reached floor. In the angle displacement of knee joint in the third event of all motion, expert showed 155.25degree and novice showed 154.00degree In right, and expert showed 155.24degree and novice showed 154.55degree in left. In this result, both were same motion type. In the angle displacement of hip joint in the third event of the all motion, expert showed 142.80degree and novice showed 134.17degree in right, and expert showed 140.28degree and novice showed 144.94degree in left. In this result, motion pattern of expert was same both sides, but novice was different. According to the results, to increase efficiency of motion and aesthetic effect in the all motion, it should stretch displacement and height of body center and make similarly angle of right and left joint.

• KIEAE Journal
• /
• 제9권4호
• /
• pp.11-16
• /
• 2009

To act and respond to the climate changes and to bring about power-saving in buildings, the changes in the atmospheric data in Korea are recorded and assessed. For the two regions representative of Korea, the data obtained from HadCM3 and actual data are compared and analyzed so as to concretely evaluate and confirm the changes taking place in the cooling and heating degree days in Korea. For the past 40 years, from 1996 to 2005, the number of heating degree days was on the decline and in the two representative regions, between 1980's and 1990's, the number of decrease in the heating degree days had been quite large. The number of cooling degree days showed a trend of increase since the 1970's and just as in the case of heating degree days, the extent of increase was quite large between the 1980's and the 1990's. The results of comparison of the number of heating and cooling degree days, one obtained from the "Korea Meteorological Administration" and another from the HadCM3 data (E127.5,N37.5,E127.5,N35), which is one of the ways of predicting the climate, showed similar trends in the number of heating degree days in the Yeosu area. However, in the case of the number of heating degree days in Seoul and the number of cooling degree days both in Seoul and Yeosu, the differences in the number ranged from a minimum of 300 days to a maximum of 1500 days. This could be attributed to the grid points used in the HadCM3, the differences in the values of latitudes and longitudes of these two locations considered in this study, topographical differences, heat island effect caused by population density etc. and while using the HadCM3, these variables factors must be taken into consideration.

• 대한치과기공학회지
• /
• 제7권1호
• /
• pp.41-51
• /
• 1985

This study has been to survey the present situation of satisfaction to the occupation and dental laboratory by means of selscting 200 dental technicians who are woked in Pusan, Deagu, Kwangju, Deajun. Questionaires were distributed to them and the summerized results were as follows; 1. In general, the dental technician's satisfaction of the occpation was revealed as moderate(Mn, 2.83), the dental technician's satisfaction of the laboratory was revealas moderate(Mn, 2.80). The highest degree item out of the satisfaction of occpation was the outlook(Mn, 3.23), and the lowest degree item was the advancement and the rise to a high position(Mn, 2.22). The highest degree item out of the satisfaction of laboratory was dental material(Mn, 3.07), and the lowest degree item was the equipment of dust collection(Mn, 2.49) 2. By age, the highest degree item out of the satisfaction of occpation was 30 to 43 group(Mn, 3.28), 50 and over group was the lowest degree item(Mn, 2.89). The highest degree item out of the satisfaction of laboratory was 40 to 50 group(Mn, 3.10), the lowest degree item was 35 to 39 group(Mn, 2.88). 3. By school career, the satisfaction of occpation and dental laboratory were higher in the graduated college group than the graduated highschool group. 4. By personal health state, the highest degree item of the satisfaction of occpation was the health group(Mn, 3.25). The highest degree item of the satisfaction of laboratory was the unhealthy group(Mn, 3.07). 5. By religion, the satisfaction if iccupation of laboratory ws higher in the religious group than the non-religious group. 6. By job career, the highest degree item of occupation satisfaction was 15 to 20 years group(Mn, 3.27), the lowest degree item was 20 and over group(Mn, 3.02). The highest degree item out of the satisfaction of laboratory was 15 to 20 years group(Mn, 3.05), The lowest degree item was 7 to 10 years group (Mn, 2.90). 7. By job position, the highest degree item out of satisfaction of occupation was the chief of laboratory group(Mn, 3.33), the head of laboratory group was the lowest degree item(Mn, 3.07). The hightest degree item out of the satisfaction of laboratory was the head of laboratory group(Mn, 3.10), the lowest degree item was the chief of laboratory group(Mn, 2.88). 8. By the place of employment, the degree of occpational satisfaction by items was found that the highest degree in the group engagel in general hospital(Mm, 3.43), the group engaged in dental clinic and hospital(Mn. 3.24), and the dental laboratory group(Mn. 3.14) in order. The difference among the group was significant emough(P<0.05). The highest degree item out of the satisfaction of laboratory was dental laboratory group(Mn. 2.70). The difference among the group was significant emough(P<0.01). 9. By monthly salary, the highest degree item out of the satisfaction of occupation was ￦500,000 to 600,000 group(Mn. 3.32), the lowest degree item was ￦600,000 and over group(Mn, 3.07). The highest degree item out of the laboratory satisfaction was ￦100,000 to 200,000 group(Mn, 3.03), the lowest degree group was ￦300,000 to 400,000 group(Mn, 2.95). 10. As compared with the degree of satisfaction according to job satisfaction, the highest degree item out of the occupational satisfaction was much satisfied group(Mn, 3.65), the lowest degree item was non-satisfied group(Mn, 2.68). The difference among the group was significant enough(P<0.05). The highest degree item out of the satisfaction of laboratory was non-satisfied group(Mn, 30.9), the lowest degree item was satisfied group(Mn, 2.84). The difference among the group was significant enough(P<0.01).

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.73-86
• /
• 1999

This study was performed to find out factors affecting degree of satisfaction with workers' working environment. The study subjects were 165 workers who were working at painting process of twelve furniture manufacturing factories in Incheon area. We used self-administered questionnaire containing general characteristics, working conditions, the degree of satisfaction with working environment, and the degree of satisfaction with working condition. In addition, we measured the exposure levels of occupational hazardous agents. The results were as follows; 1. Correlations between the degree of satisfaction with workers' working environment and the measured of occupational hazardous agents did not affect the degree of satisfaction with workers' working environment. 2. Factors affecting the degree of satisfaction with workers' working environment were not the exposure levels of occupational hazardous agents, but the degree of satisfaction with working condition, size of industry, health status, and types of ventilation system. As the degree of satisfaction with working condition was increased, the degree of satisfaction with working environment was increased. Also, for the workers who had good health status, the degree of satisfaction with work environment was appeared to be high. To increase the degree of satisfaction, with workers' working environment, firstly, effective work management and production control are required. Also, the worker's effort to negotiate continuously with top manager on improving working conditions is required. Secondly, developing heath promotion program to be appropriate for the characteristics of worksite is required. Moreover, leading worker's participation in health promotion program is very important to increase the degree of satisfaction with workers' working environment.