• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.441-450
• /
• 2006

WiBro(Portable Internet Service) is service being capable to provide a high data rate wireless internet access with Personal Subscriber Station under the stationary or mobile environment, anytime and any where. It will fill the gap between very high data rate wireless local area networks and very high mobility cellular systems. The security is an important point of WiBro providing high data and mobile wireless services. This paper proposes user authentication mechanism of WiBro wireless networks applied EAP-AKA authentication protocol. As a result of Wireless authentication based on EAP-AKA, this mechanism is capable to be used in WiBro-WLAN-3GPP interworking scenario as well as the WiBro authentication mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.113-123
• /
• 2009

Wireless mesh networks have been studied as the next generation technology to solve problems of conventional wireless networks. Particularly, mobile WiMAX based wireless mesh networks are noticed due to many advantages. In this paper, we propose a layer-2 handover scheme for mobile WiMAX based wireless mesh networks. A layer-2 handover scheme based on mobile WiMAX causes many handover failures over mobile WiMAX based wireless mesh networks because it does not consider the characteristics of wireless mesh networks. The proposed scheme does not bring about packet losses achieving lower handover latency than a conventional handover scheme. Simulation results show that the proposed scheme achieves loss-free and low handover latency during the layer-2 handover.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.105-111
• /
• 2017

In this paper, the analysis results are shown about several weights of Weighted K-Nearest Neighbor method, Recently, it is employed for the indoor positioning technologies using WiFi fingerprint which has been actively studied. In spite of the simplest feature, the W-KNN method shows comparable performance to another methods using WiFi fingerprint technology. So W-KNN method has employed in the existing indoor positioning system. It shows positioning error performance according to data preprocessing and weight factor, and the analysis on the weight is very important. In this paper, based on the real measured WiFi fingerprint data, the estimation error is analyzed and the performances are compared, for the case of data processing methods, of the weight of average, variance, and distance, and of the averaging several position of number K. These results could be practically useful to construct the real indoor positioning system.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.27-32
• /
• 2012

In this paper, the wastewater treatment plant sludge proposed TN/TP sensor data collected an efficient monitoring system in order to implement status monitoring to build WiFi networks. Also we sludge concentration and TN/TP sensor data were collected from wastewater treatment plant. It is able to be monitored sensor data through smart devices(Smart phones, smart pad, tablet PC, etc.) and pc. In addition, when certain events occur immediately be able to cope by adding features to enable efficient and rapid processing, real-time status can be checked by ensuring improved user access and convenience. We has built a WiFi network for to transfer data efficiently. It proved its effectiveness by analysis of sensor communication network. Therefore, we have verified the usefulness of the proposed technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.268-275
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patch, cross strip in circular ring, modified feed line, and two rectangular slot in the ground plane for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.15-21
• /
• 2015

Due to the appearance of various mobile terminals like smartphone, smartpad, and smartwatch and tremendous development of WiFi technology, data utilization rate on WiFi network is significantly increasing. As a result, users are wanting to use WiFi network using only a simple identification at a visited place as if they are at their home institute. In this paper, we review the domestic status of eduroam service which supports global extension of wireless network access environment and present the future development perspective of the service in Korea. Besides, we shed light on the current status of WiFi sharing service between domestic universities and propose some methods to facilitate the join of domestic universities in eduroam service.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.341-348
• /
• 2022

Wi-Fi Sensing, which uses Wi-Fi technology to sense the surrounding environments, has strong potentials in a variety of sensing applications. Recently several advanced deep learning-based solutions using CSI (Channel State Information) data have achieved high performance, but it is still difficult to use in practice without explicit data collection, which requires expensive adaptation efforts for model retraining. In this study, we propose a Channel State Information Automatic Labeling System (CALS) that automatically collects and labels training CSI data for deep learning-based Wi-Fi sensing systems. The proposed system allows the CSI data collection process to efficiently collect labeled CSI for labeling for supervised learning using computer vision technologies such as object detection algorithms. We built a prototype of CALS to demonstrate its efficiency and collected data to train deep learning models for detecting the presence of a person in an indoor environment, showing to achieve an accuracy of over 90% with the auto-labeled data sets generated by CALS.

• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2015

In this paper, we describe the design of a fusion labeling system which is controlled by the Wi-Fi signals. The Current labeling system which is used in the industry is designed to work independently on the production line not connected with internet network services. For such reasons, it is very inconvenient for the labeling system to transfer such labeling data of the production line to the server computer. We propose a labeling system connected to the Wi-Fi service being able to send real-time transmission of labeling data. This system can supply the labeling data of production line to the server computer in realtime and improve the production quality than the existing system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.299-300
• /
• 2010

This paper presents experimental results on frequency interference phenomena between WiFi and ZogBee communication systems which are used for wireless communication in a port. When communication systems use a frequency band in a region, it hurts communication reliability. Hence, understanding and analysis on frequency interference phenomena through experiments. With various experiments between WiFi and ZigBee, we find out that 26th channel of ZigBee collides with WiFi communication channels, which is unknown result yet.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.64-75
• /
• 2018

People usually check their social media, e-mail, and online news on their smartphones using their carrier network. During this process, much of the data traffic is offloaded to ubiquitous Wi-Fi networks. Such offloading will continue to increase rapidly because of flourishing public Wi-Fi networks located around the world. In this technical report, we first investigate domestic public Wi-Fi projects, and followed by foreign projects. In addition, we investigate the Wi-Fi technology evolution that has been standardized in IEEE 802. More and more people are tending to use Wi-Fi, not only at home or work, but also on public transport such as buses and trains. Hence, it is important to come up with ideas that can realize Wi-Fi onboard. The key technologies needed here are related to a mobile wireless backhaul between trains and trackside radio equipment, or between buses and roadside units. Thus, we also investigate the mobile wireless backhaul technologies and their trends.