• 터널과지하공간
• /
• 제1권2호
• /
• pp.218-228
• /
• 1991

Natural stress measurements have been made at two sites at the depth of 280m from surface by means of stress relief overcoring methods using three directonal deformation gage. Attempts have been made to determine the state of natural stress in the rock and provide useful basic data to investigate the stress distribution and the determination of yield zone around powerhouse cavern. The magnitude and the direction of the miximum principal stress obstained from in-situ stress measurements is -96.1kgf/$\textrm{cm}^2$ and N38$^{\circ}$W, N35$^{\circ}$W respectively. Vertical stresses are in approximately agreement with the theoretical value. The ratio of measured to theoretical stresses are 85% at two sites. The ratio of average horizontal to vertical stresses(k=($\sigma$h)ave/$\sigma$v is 1.07.

• 터널과지하공간
• /
• 제14권4호
• /
• pp.295-303
• /
• 2004

연약층과 견고한 암반층이 습곡형태로 혼재된 지질조건의 지하 심부 채굴 현장을 대상으로, 심부 급경사 연약층의 단계적 굴착 진행에 따른 갱도 및 주변 암반의 거동 양상을 전산해석과 현장계측을 통하여 비교 분석하였다. 전산해석에서는 Hoek ＆ Brown의 경험적 파괴기준 및 변형률연화모델을 적용한 탄소성 해석 기법을 이용하였다. 현장계측에서는 유압캡슐, 지중변위계, 내공변위계를 갱도 및 주변 암반에 설치하여 응력과 변위를 계측하였다. 경험적 파괴조건 및 변형률연화모델을 이용한 탄소성 해석은, 현장 지질조건 및 채굴과정의 복잡함에도 불구하고 현장계측결과와 유사한 양상을 보여주어 타당성을 검증할 수 있었다. 이러한 전산해석 및 현장계측의 비교를 통해 지하 굴착 갱도의 변형 거동 과정을 예측하고 이후의 굴착 및 지보보강 설계의 지침을 제공할 수 있을 것이다.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.175-179
• /
• 2003

For the total description of mechanical behaviors of elastomers, it is necessary to know the so-called rheological constitutive equation i.e. the strain-energy density function (W) in case of elastomers, which necessitates biaxial tensile results of elastic body. This paper first describes the experimental results of biaxial tensile measurements on poly(siloxane) model networks. W was estimated from its differential form i.e. the $1^{st}$ differential of W is stress. The W was found to reproduce the experimental stress-strain results, and the W estimated for silica filled poly(siloxane) networks suggest a different behavior between conventional precipitated silica and in situ formed silica. The difference suggests the different surface property of the two silicas.

• 터널과지하공간
• /
• 제2권1호
• /
• pp.164-176
• /
• 1992

The conical-ended borehole technique and hemispherical-ended borehole technique are proposed, for the accurate stress measurement within a rock mass. Theory of stress tensor determination and in situ measurement system are presented with successful case examples, and the characteristics of stress distribution within rock masses are examined by the multiple times measurement in a single borehole. Subsequently, the problem in relation to the numerical approach for cavern designing is discussed on the basis of the dependency of the stress discontinuity on the geological discontinuities and so on.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.34-41
• /
• 2006

A 3-dimensional stress measurement system based on the bore hole bottom deformation method, which is one of the stress relief methods, was developed. A pilot bore hole is drilled from the bottom of a bore hole and the stress meter is inserted into the pilot bore hole in the method. The bore hole is advanced as an over coring and the deformations in seven directions are measured by cantilever type-sensors. Using the cantilever type-sensors saves time for hardening of glue. No cable connection between the stress meter and a data logger is necessary since a compact data logger is installed in the stress meter. The accuracy of the stress meter was confirmed by a biaxial test for a Shikotsu welded tuff block although in-situ tests have not been carried out yet.

• BMB Reports
• /
• 제29권5호
• /
• pp.393-397
• /
• 1996

Sprague-Dawley male rats (150 g) were chronically treated with 5 v/v % ethanol admixed with nutritionally complete liquid diet and fed ad libitum for 3 weeks. Controls were pair fed with the isocaloric sucrose liquid diet. One half of each group was exposed to cold stress at $4^{\circ}C$ either for 24 h (for determination of mRNA by in situ hybridization) or for 48 h (for determination of enzyme activity). Chronic ethanol treatment (ethanol) did not affect tyrosine hydroxylase (TH) mRNA level in locus coeruleus (LC) of brain and adrenal medulla (AM) compared to controls. Cold stress showed strong increase of TH mRNA level in LC and AM compared to controls. Pretreated ethanol reduced the increased TH mRNA level by cold stress in LC and AM. Ethanol did not affect TH activity in LC and adrenal glands (adrenals). Cold stress increased TH activity in LC but not in adrenals. Pretreated ethanol did not reduce the increased TH activity by cold stress in LC but this result was not shown in adrenals. It is suggested that ethanol does not affect the message level and enzyme protein level for TH in LC and AM in normal rat. It is also hypothesized that pretreated ethanol reduces the magnitude of acute cold stress response, that is induction of TH mRNA in LC and AM, and does not reduce the increased TH enzyme protein that is also acute cold stress response in LC.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.192-195
• /
• 2004

Products of gridded surface wind and windstress vectors over the world ocean have been constructed by satellite scatterometer data with highly temporal and spatial resolutions. Even if the ADEOS-II/SeaWinds has supplied surface wind data only for short duration in Apr. to Oct. 2003 to us, it permits us to construct a product with higher resolution together with the Qscat/SeaWinds. In addition to our basic product with its resolution of $1^{\circ}\times1^{\circ}$ in space and daily in time, we try to construct products with $1/2^{\circ}\times1/2^{\circ}$ and semi- and quarter-daily resolution. These products are validated by inter-comparison with in-situ data (TAO and NDBC buoys), and also compared with numerical weather prediction(NWP) ones (NCEP reanalysis). Result reveals that our product has higher reliability in the study area than the NCEP's. For the open ocean regions in the middle and high latitudes where there are no in-situ data, we find that there are clear differences between them. Especially in the southern westerly region of 400-600S, the' wind-stress magnitudes by the NCEP are significantly larger than the others, suggesting that they are overestimated. We also calculate wind-stress curl field that is an important factor for ocean dynamics and focus its spatial character in the northwestern Pacific around Japan. Positive curl areas are found to cover from southwest to northeast in our focus region and almost correspond to the Kuroshio path. It is suggested that the vorticity field in the lower atmosphere is related to the upper oceanic one, and thus an aspect of air-sea interaction process.

• 터널과지하공간
• /
• 제17권2호
• /
• pp.128-138
• /
• 2007

상대적으로 저심도에 건설되는 암반구조물의 경우 단층이나 절리 등 암반 내 존재하는 불연속면이 굴착 후 생성된 경계면과의 교차에 의해 구조적인 형태의 파괴가 지배적으로 발생하나, 고심도에 건설되는 경우 높은 현지응력과 굴착에 따른 유도응력으로 인해 공동 경계면에서 스폴링이나 슬래빙과 같은 취성파괴가 발생할 수 있다. 취성파괴는 암반구조물의 안정성을 약화시키는 주된 원인으로, 고심도 영역에서 암반구조물의 안정성을 확보하기 위하여 응력조건에 따라 발생하는 취성파괴의 개시시점, 파괴수준 및 파괴범위 등과 같은 파괴특성이 규명되어야 한다. 본 연구에서는 고심도의 암반구조물에서 발생할 수 있는 취성파괴의 파괴수준 및 개시시점과 재하응력사이의 관계를 정량적으로 평가하고자 진삼축 응력조건을 구현할 수 있는 모형실험장치를 설계, 제작하여 여러 응력조건에서 모형실험을 수행하였다. 공동주변에서 발생한 파괴수준을 육안관찰과 미소파괴음 발생양상에 의해 3단계로 구분하고, 진삼축 응력조건에 따라 제시하였다. 그 결과 파괴수준은 공동단면에 작용하는 재하응력$(S_v,\;S_{H2})$ 뿐 아니라 공동 축에 평행한 재하응력 $S_{H1}$에 영향을 받으며, $S_{H1}$와 $S_{H2}$의 크기가 증가할수록 동일한 $S_v$에서 파괴수준은 감소하였다. 파괴개시점 역시 $S_{H1}$와 $S_{H2}$의 증가에 따라 파괴개시를 위한 응력수준은 증가하였으며, 다중회귀분석을 통해 파괴개시시점과 진삼축 응력조건의 관계식을 도출하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권6호
• /
• pp.354-359
• /
• 2000

A new method of measuring residual stress in micromachined film is proposed. An estimation of residual stress is performed by using least squares fit with an appropriate deflection modeling. an exact value of residual stress is obtained without any of the ambiguities that exist in conventional buckling method, and a good approximation is also obtained by using a few data points. Therefore, the test structures area could be greatly decreased by using this method. The measurement can be done more easily and simply without any actuation or any specific measuring equipment. The structure and fabrication processes described in this paper are simple and widely used in surface micromachining. In addition, in-situ measurement is available by using the proposed method when the test structure and the measurement structure are fabricated on a wafer simultaneously.

• 한국터널지하공간학회 논문집
• /
• 제9권1호
• /
• pp.49-62
• /
• 2007

본 연구에서는 사질토 지반에 설치된 수직갱에 작용하는 토압에 대한 기존 제안식을 수정하였다. 이를 검증하기 위하여 깊이에 관계없이 동일한 반경방향 변위를 일으킬 수 있는 실내 모형시험장치를 개발하였으며, 벽면마찰각과 상대 밀도를 변수로 시험하였다. 실내 모형시험 결과는 수정식에서 접선방향 토압계수(수직응력에 대한 접선방향 응력 비)인 $\lambda$값을 $\lambda=1-sin\phi$와$\lambda=1$을 사용하였을 경우의 토압 사이에 분포하였다. 다층지반에 설치된 원형수직갱 배면지반의 파괴면을 가정하고 수정식을 적용하여 다층지반에 설치된 원형수직갱에 작용하는 토압 산정방법을 제안하였다. 시공현장의 3개의 수직갱으로부터 계측 데이터를 획득하였으며 이를 토압으로 환산하여 제안된 방법을 검증하였다. 계측 데이터로부터 환산된 대부분의 환산 토압은 제안된 방법의 토압과 잘 일치하였다.