• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.325-330
• /
• 2012

Differential absorption LIDAR (DIAL) is frequently used for atmospheric gas monitoring to detect impurities such as nitrogen dioxide, sulfur dioxide, iodine, and ozone. However, large differences in the on- and off-line laser wavelengths can cause serious errors owing to differential aerosol scattering. To resolve this problem, we have developed a new DIAL system for iodine vapor measurements in particular. The suggested DIAL system uses only one laser under seeded and unseeded conditions. To check the detection-sensitivity and error effects, we compared the results from a system using two seeded lasers with those from a system using a seeded and an unseeded laser. We demonstrate that the iodine concentration sensitivity of our system is improved in comparison to the conventional two seeded or two unseeded laser combinations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.773-777
• /
• 2005

This article is about using information technology to apply with water loss inspection system in District Metering Area (DMA). Inspector can check Flow rate and Minimum Night Flow; NMF via Smart Phone or PDA include sending SMS Alert in case the Pressure, Flow rate and NMF is over the range of controlling. This will be used as equipment to implement water loss in international proactive and can keep on water loss reduction more efficiency. The system consists of Data Logger which collects data of Flow rate from DMA Master Meter. PC is Wap Server which dial via modem in order to get data through FTP Protocal that will convert text file to Microsoft Access Database. Wappage will use xhtml language to show database on Wapbrowser and can show the result on Smart Phone or PDA by graph and table for system analysis.

• Tuberculosis and Respiratory Diseases
• /
• v.87 no.4
• /
• pp.458-464
• /
• 2024

Background: While inhalation therapy efficacy hinges on attaining proper peak inspiratory flow rate (PIFR), the prevalence of inappropriate PIFR among patients with chronic obstructive pulmonary disease (COPD) remains unstudied in Korea. This study aimed to assess the prevalence of inappropriate PIFR, its correlation with COPD assessment test (CAT) scores, and factors associated with suboptimal PIFR. Methods: We enrolled 108 patients with COPD who had been using the same inhaler for at least 1 year without exacerbations. PIFR was measured using an inspiratory flow meter (In-Check DIAL G16). Demographic, clinical, pulmonary function, and CAT score data were collected. Inappropriate was defined as PIFR <60 L/min for dry power inhaler (DPI) users, and >90 L/min for aerosol device users. Results: The cohort comprised 87 (80.6%) men, mean age 71.0±8.5 years, with mean post-bronchodilator forced expiratory volume in 1 second of 69.1%±1.8% predicted. Twenty-nine (26.9%) used aerosol devices only, 76 (70.4%) used DPIs only, and three (2.8%) used both. Inappropriate PIFRs were found in 17.2% of aerosol device users, and 42.1% of DPI users. CAT scores were significantly higher in the inappropriate PIFR group than in the appropriate PIFR group (11.2±7.7 vs. 7.5±4.9, p=0.003). In DPI users, female, shorter height, lower body weight and maximal voluntary ventilation (MVV) were associated with inappropriate PIFR. Conclusion: The prevalence of inappropriate PIFR among patients with COPD is 17.2% for aerosol device users, and 42.1% for DPI users. Suboptimal PIFR correlates with female gender, shorter stature, lower weight and MVV in DPI users.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.3-16
• /
• 1999

A series of model tests was conducted to investigate the one-dimensional consolidation behavior of an improved ground where sand compaction piles(SCP) were either fully or partly installed in the model clay ground. In order to check the one-dimensional consolidation settlement and stress concentration ratios, earth pressure, pore pressure transducers and dial gauges were installed in the model clay ground. The test results revealed that the consolidation settlement of the partly penetrated SCP ground was larger than that of the fully penetrated SCP ground, and the stress concentration ratios (m) of the fully penetrated SCP ground were higher than these of the partly penetrated SCP ground. The stress concentration ratio was decreasing with the increase in the penetration depth of SCP.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.50-55
• /
• 2011

The fluid power products are widely used in current industrial area such as automation of products and equipment assembly, high-tech machine tool, aircraft, train, and etc. As the development of industry is in progress, the development of the fluid power products is demanding and it is required in every industrial area. This research proposed a pneumatic system to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the valve system. The pneumatic system consisted of a combination of pneumatic actuator, four two-port valves, two three-port valves, two pressure valve, a check valve, two proximity sensors, and a program logic controller (PLC). The position controller is based on the PLC connected with the proximity sensors. The maximum air pressure applied for tests was $49.05N/cm^2$ and the displacement accuracy of a stroke was measured using a dial gauge. The supply- and discharge-side of air pressure and the length of the stroke of the pneumatic cylinder were varied The test of the position control of the pneumatic cylinder was carried out 50 times at each supply- and discharge-side air pressure of 24.53/34.34, 29.43/39.24, 34.34/44.15, and $39.24/49.05N/cm^2$ and replicated three times. The accuracy of the displacement of the pneumatic cylinder stroke increased as the supply- and discharge-side of air pressure increased with the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with the fixed supply- and discharge-side of air pressure of the pneumatic cylinder as 34.34 and $44.15N/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder was obtained at the supplyand discharge-side of air pressure of 39.24 and $49.05N/cm^2$, respectively, and strokes of 170 and 190mm.