• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.441-448
• /
• 2002

Dispersions of non-soluble ceramic particles in a metallic matrix can enhance the strength and heat resistance of materials. With the advent of mechanical alloying it became possible to put the theoretical concept into practice by incorporating very fine particles in a flirty uniform distribution into often oxidation- and corrosion- resistant metal matrices. e.g. superalloys. The present paper will give an overview about the mechanical alloying technique as a dry, high energy ball milling process for producing composite metal powders with a fine controlled microstructure. The common way is milling of a mixture of metallic and nonmetallic powders (e.g. oxides. carbides, nitrides, borides) in a high energy ball mill. The heavy mechanical deformation during milling causes also fracture of the ceramic particles to be distributed homogeneously by further milling. The mechanisms of the process are described. To obtain a homogeneous distribution of nano-sized dispersoids in a more ductile matrix (e.g. aluminium-or copper based alloys) a reaction milling is suitable. Dispersoid can be formed in a solid state reaction by introducing materials that react with the matrix either during milling or during a subsequent heat treatment. The pre-conditions for obtaining high quality materials, which require a homogeneous distribution of small dis-persoids, are: milling behaviour of the ductile phase (Al, Cu) will be improved by the additives (e.g. graphite), homogeneous introduction of the additives into the granules is possible and the additive reacts with the matrix or an alloying element to form hard particles that are inert with respect to the matrix also at elevated temperatures. The mechanism of the in-situ formation of dispersoids is described using copper-based alloys as an example. A comparison between the in-situ formation of dispersoids (TiC) in the copper matrix and the milling of Cu-TiC mixtures is given with respect to the microstructure and properties, obtained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.339-344
• /
• 2016

This study is conducted for analysis of distribution of macrobenthic by using satellite image and in-situ data in the intertidal zone of Suncheon bay. The satellite images on low tide on July 7, 2010 and high tide on Sept. 25, 2010, respectively, are classified into sea water, tidal flat and land. It is to extract for intertidal zone overlaying at low tide and high tide image from previously classified image. Total number of species emergence are 196 species in the intertidal zone, and most species are emergence in the right part of the subtidal zone. The Sigambra tentaculata is the dominant species and emergence the Mediomastus californiensis, Magelona japonica, etc. It is noticed that many kind of macrobenthic distribution in the subtidal zone more than the supralittoral zone. It find out that contamination due to organic through the macrobenthic distribution with a strong resistance to organic in the subtidal zone of Suncheon Bay.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.920-926
• /
• 2007

The upflow Biobead$^{(R)}$ process, one of biological aerated filters (BAF), which was used commercially, invented for removal of organic materials and nitrification. This process was modified to enhance the ability of denitrification through the induction of pre-anoxic tank. In this research, we investigated the effects of hydraulic retention time (HRT) and backwashing period in aerobic tank. The characteristics of nitrifying bacteria, which are composed of ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), also investigated using fluorescence in situ hybridization (FISH). Even though the HRT was shortened, the efficiency of nitrification was not decreased when the organic loading rate and ammonium-nitrogen loading rate were $2.10kg/m^3/day$ and $0.25kg/m^3/day$, respectively. And then the distribution ratios of AOB and NOB showed the similar patterns. However, when the backwashing period was lengthened from 12 hours to 24 hours in aerobic 1 tank, the nitrification efficiency was decreased to 63.9% from 89.2%. The results of FISH explained that this decrease of nitrification efficiency was caused by the decrease of distribution ratio of AOB in aerobic 1 tank. The nitrification efficiencies of aerobic 1 and aerobic 2 tank were increased when the backwashing period was lengthened because of relative high distribution ratios of nitrifying bacteria.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.32-32
• /
• 2019

The aim of this study was to provide basic guidelines for conservation and management of endangered plants in the national parks of Korea. Iris dichotoma Pall. (Iridaceae), which is a popular garden plant, is considered a second-class endangered species by Korean government and it is listed as a EN (Endangered) species in Red Data Book of Korea. We analyzed ecological conditions of I. dichotoma habitats based on vegetation properties and soil characteristics. This species which is known to inhabit in grassland adjacent to the ocean of lowlands slope and its population was located at an elevation of 8 m to 11 m. In the study sites, the mean of soil organic matter, total nitrogen and soil pH were 6.16%, 0.234% and 5.39 respectively. Additionally, the genetic variation and structure of three populations were assessed using ISSR (Inter Simple Sequence Repeat) markers. The genetic diversity of I. dichotoma (P = 59.46%, H = 0.206, S = 0.310) at the species level was relatively high. Analysis of molecular variance (AMOVA) showed 82.1% of the total genetic diversity was occurred in within populations and 17.9% variation among populations. Lastly, we developed predicted distribution model based on climate and topographic factors by applying SDMs (Species Distribution Models). Consequently, current status of I. dichotoma habitats is limited with natural factors such as the increase of the coverage rate of the herbs due to ecological succession. Therefore, it is essential to establish in situ and ex situ conservation strategies for protecting natural habitats and to require exploring potential and alternative habitats for reintroduction.

• Journal of Astronomy and Space Sciences
• /
• v.39 no.2
• /
• pp.35-42
• /
• 2022

During their respective missions, the spacecraft Voyager and Cassini measured several Saturn magnetosphere parameters at different radial distances. As a result of information gathered throughout the journey, Voyager 1 discovered hot and cold electron distribution components, number density, and energy in the 6-18 Rs range. Observations made by Voyager of intensity fluctuations in the 20-30 keV range show electrons are situated in the resonance spectrum's high energy tail. Plasma waves in the magnetosphere can be used to locate Saturn's inner magnetosphere's plasma clusters, which are controlled by Saturn's spin. Electromagnetic electron cyclotron (EMEC) wave ring distribution function has been investigated. Kinetic and linear approaches have been used to study electromagnetic cyclotron (EMEC) wave propagation. EMEC waves' stability can be assessed by analyzing the dispersion relation's effect on the ring distribution function. The primary goal of this study is to determine the impact of the magnetosphere parameters which is observed by Cassini. The magnetosphere of Saturn has also been observed. When the plasma parameters are increased as the distribution index, the growth/damping rate increases until the magnetic field model affects the magnetic field at equator, as can be seen in the graphs. We discuss the outputs of our model in the context of measurements made in situ by the Cassini spacecraft.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.374-381
• /
• 2002

Several sensor systems are used to estimate the reinforceing effect of pile in hihg cut slopes, and to find a failure zone in slopes effectively. Inclinometer, extensometer and V/W sensor have shown a great potentiality to serve real time health monitoring of the slope structures. They were embedded or attached to the structures, we conducted field tests and test results have shown great solutions for sensor systems of Civil Engineering Smart Structures. This research is to seek for the relationships among the slope movement and the reinforceing effect of pile, and the strain distribution in a active zone by analyzing the data from the in-situ measurement so that the possible failure zone should be well defined based on the relationships. Also, the relationships between temperature and reinforceing effect of pile, and the strain distribution are estimated in this paper.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1864-1866
• /
• 1999

The magnetic nondestructive test can be applied to evaluate the magnetic material characteristics and the fracture properties through the internal defects of SA-508 used in the pressure vessels of the nuclear power plants as the direct and accurate in-situ testing methods. The fracture toughness, yield strength and the stress distribution around the defects in the surface and sub-surface of magnetic materials can be directly estimated by Bark-hausen noise(BN) methods as NDT. The testing process of SA-508 by Barkhausen noise method was advanced by controlling the austenizing peak temperature and the time of maintenance at a constant austenizing peak temperature, therefore causing the variation of fracture toughness. Through above process. we can evaluate the variations of effective grain size and the correlation of effective grain size and FATT at each situation. And the stress distribution around the defects can be quantified nondestructively through Barkhausen method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5B
• /
• pp.487-495
• /
• 2010

Soil moisture is a crucial factor in hydrological system which influences runoff, energy balance, evaporation, and atmosphere. United States National Aeronautic and Space Administration (NASA) and Department of Agriculture (USDA) have established Soil Moisture Experiment (SMEX) since 2002 for the global observations. SMEX provides useful data for the hydrological science including soil moisture and hydrometeorological variables. The purpose of this study is to investigate the relationship between remotely sensed soil moisture data from aircraft and satellite and ground based experiment. C-band of Polarimetric Scanning Radiometer (PSR) that observed the brightness temperature provides soil moisture data using a retrieval algorithm. It was compared with the In-situ data for 2-30 cm depth at four sites. The most significant depth is 2-10 cm from the correlation analysis. Most of the sites, two data are similar to the mean of data at 10 cm and the median at 7 cm and 10 cm at the 10% significant level using the Rank Sum test and t-test. In general, soil moisture data using the C-band of the PSR was established to fit the Normal, Log-normal and Gumbel distribution. Soil moisture data using the aircraft and satellites will be used in hydrological science as fundamental data. Especially, the C-band of PSR will be used to prove soil moisture at 7-10 cm depths.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1055-1062
• /
• 2014

Hydroacoustic surveys were conducted for spatio-temporal distribution and size estimation of fish in the Yongdam reservoir, Korea, from April to July 2014. Acoustic data were collected along acoustic transects using a 120 kHz scientific echosounder. The received acoustic data were the in situ acoustic target strength (dB) and nautical area scattering coefficient ($m^2/mile^2$). Data on fish behavioral patterns and size were collected using a DIDSON acoustic camera at stationary stations. Fish were mainly distributed in the center channel and close to the outer Yongdam reservoir. Acoustic density of fish in the summer season were higher than in the spring season. The seasonal vertical distribution pattern of fish aggregations may be strongly related to the vertical temperature structure. The size distribution of fish obtained from an acoustic camera correlated well with the acoustic size of fish from an echosounder.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.478-485
• /
• 2008

The extreme steam temperature deviation experienced in the superheater of a tangentially fired boiler can seriously affect its economic and safe operation. This temperature deviation is one of the main causes of boiler tube failures. The steam temperature deviation is mainly due to the thermal load deviation in the lateral direction of the superheater. The thermal load deviation consists of several causes. One of the causes is the non-uniform heat flow distribution of burnt gas on the superheater tube system. This distribution is very difficult to measure in situ using direct experimental techniques. So, we need thermal load model to estimate the tube temperature. In this paper, we propose a thermal load distribution model by using CFD analysis and plant data. We successfully predict the tube temperature and the steam flow rate in a final superheater system from the thermal load model and one dimensional heat-flow system analysis. The proposed model and analysis method would be valuable in preventing the frequent tube failure of the final superheater tubes.