• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.5-17
• /
• 2021

The Moon has been an attractive planet as an outpost for deep space exploration since He-3 and water ice which can be used as energy resources were discovered. In-Situ Resource Utilization (ISRU) construction material fabrication method is required for sustainable space planet exploration. In this paper, the possibility of microwave sintering technology for construction material fabrication was evaluated using lunar regolith that can be easily collected from the Moon surface. Experimental assessment of the influence factors on microwave sintering was conducted using a hybrid sintering system for efficient processing. The heat distribution in the furnace was observed using thermal paper that is coated with a material formulated to change color when exposed to heat. Based on this result, sintered cylindrical KLS-1s with a diameter of 1 cm and a height of 2 cm were fabricated. Densities were measured for the sintered KLS-1s under rotating turntable conditions that have an effect of microwave dispersion. The more dielectrics were arranged, the more microwaves were dispersed reducing the heat concentration, and thus a uniformity of sintered KLS-1s was enhanced.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.71-78
• /
• 2011

This paper aims to present the evaluation of engineering characteristics and reusing possibility of waste powders produced in dolomite and limestone nonmetal mining by physical and mechanical experiments on compaction, uniaxial compressive strength, permeability, chemical composition, and so on. Granite soil, 2 types of limestone waste powder, and 1 type of dolomite waste powder were used for main materials, and cement and bentonite were used for admixed materials in this experiments. The findings based on the experimental results are the severe difference of chemical composition of the dolomite & limestone waste powder and the crushed rock waste powder, and the outstanding of engineering characteristics of the dolomite waste powder with high content of MgO compared with the limestone waste powder. The engineering properties on compaction, uniaxial compressive strength, and permeability are enhanced with increase of admixed ratio of waste powder on granite soil. From the experimental results, it can be suggested that the dolomite waste powder admixed with in-situ granite soil is useful as geo-materials with considering of distribution costs.

• Economic and Environmental Geology
• /
• v.55 no.1
• /
• pp.1-17
• /
• 2022

The mechanical and thermal properties of the rock masses can affect the performance associated with both the isolating and retarding capacities of radioactive materials within the deep geological disposal system for High-Level Radioactive Waste (HLW). In this study, the essential parameters for the site descriptive model (SDM) related to the rock mechanics and thermal properties of the HLW disposal facilities site were reviewed, and the technical background was explored through the cases of the preceding site descriptive models developed by SKB (Swedish Nuclear and Fuel Management Company), Sweden and Posiva, Finland. SKB and Posiva studied parameters essential for the investigation and evaluation of mechanical and thermal properties, and derived a rock mechanics site descriptive model for safety evaluation and construction of the HLW disposal facilities. The rock mechanics SDM includes the results obtained from investigation and evaluation of the strength and deformability of intact rocks, fractures, and fractured rock masses, as well as the geometry of large-scaled deformation zones, the small-scaled fracture network system, thermal properties of rocks, and the in situ stress distribution of the disposal site. In addition, the site descriptive model should provide the sensitivity analysis results for the input parameters, and present the results obtained from evaluation of uncertainty.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2009

This study was carried out to investigate the effects of collection time on the physical characteristics, Nutritive value, digestibility and palatability in rice straw. Collection time of rice straw after the rice harvest was allocated into nine treatments: T1 (10 days), T2 (25 days), T3 (40 days), T4 (55 days), T5 (70 days), T6 (85 days), T7 (100 days), T8 (115 days) and T9 (130 days). The results are summarized as follow: Plant length, leaf length and green degree were decreased with prolonging collection time. Mold distribution and dry matter loss were increased with prolonging collection time. Crude protein and crude fat were decreased with prolonging collection time, crude fiber were increased with prolonging collection time. But crude ash showed multifarious. In situ dry matter digestibility was decreased with prolonging collection time. Palatability of Hanwoo, Holstein and deer was decreased with prolonging collection time. The results of this study indicate that good rice straw collection time would be recommendable during the from 10 days to 40 days after rice straw harvest.

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.33-43
• /
• 2003

Field investigations of the orientations of discontinuity planes inside the borehole for designing the underground rock structures have been depend solely on the borehole image-taking techniques. But, borehole image-taking has to be processed after the completion of drilling operation and also requires the handling of highly expensive apparatus so that practical application is very restricted. In this study Discontinuity Orientation Measurement (DOM) drilling system and discontinuity analysis model RoSA-DOM are developed to acquire the reliable information of rock structure by analyzing the characteristics of joint distribution. DOM drilling system retrieves the rock core on which the reference line of pre-fixed drilling orientation is engraved. Coordinates of three arbitrary points on the joint surface relative to the position of reference line are assessed to determine the orientation of joint plane. The position of joint plane is also allocated by calculating the location of core axis at which joint plane is intersected. Then, the formation of joint set is analyzed by utilizing the clustering algorithm. Total and set spacings are calculated by considering the borehole axis as the scanline. Engineering applicability of in-situ rock mass around the borehole is also estimated by calculating the total and regional RQDs along the borehole axis.

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1181-1194
• /
• 2018

This study suggests a novel approach of estimating stream flow discharge using the Synthetic Aperture Radar (SAR) images taken from 2015 to 2017 by European Space Agency Sentinel-1 satellite. Fifteen small to medium sized rivers in the Han River basin were selected as study area, and the SAR satellite images and flow data from water level and flow observation system operated by the Korea Institute of Hydrological Survey were used for model construction. First, we apply the histogram matching technique to 12 SAR images that have undergone various preprocessing processes for error correction to make the brightness distribution of the images the same. Then, the flow estimation model was constructed by deriving the relationship between the area of the stream water body extracted using the threshold classification method and the in-situ flow data. As a result, we could construct a power function type flow estimation model at the fourteen study areas except for one station. The minimum, the mean, and the maximum coefficient of determination ($R^2$) of the models of at fourteen study areas were 0.30, 0.80, and 0.99, respectively.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.186-199
• /
• 1997

The soils derived from granite gneiss occupy almost one third of the land area in Korea. The soils under forest vegetation, formed on granite gneiss, in Sun chon-shi, Chollanam-do in southern part of Korea, were studied to evaluate the weathering and the transformation of primary minerals into secondary minerals, clay minerals. The studied soils contained large amounts of ferromagnesian minerals, weathered biotites and were well weathered, strongly acid and low in organic matters and in ration exchange capacity. The clay contents in the Bt horizon were almost two times higher than those in the C horizon. The O horizon had a thin layer which consisted of a little decomposed plant components with a granic fabric and high porosity, and showed the micromorphological characteristics of moder humus. The related distribution pattern of the E horizon were enaulic and large amounts of silts and small amounts of sand grains were another characteristics of the E horizon. The most striking micromorphological features were multilaminated clay coating and infillings in the voids in the Bt and C horizons, and generally limpid ferriargillans ejected from the biotites and imparted red color to the soils in the Bt horizon. High clay contents in the Bt horizon was not only due to clay translocation, but also due to intensive in situ mineral weathering in this horizon. The most significant pedogenic process, revealed by the petrographic microscope and SEM, was the formation of iron oxides from biotites, the formation of tubular halloysites and the weathering models of biotites; wedge weathering and layer weathering. The thick coating on the weathering biotites showed the characteristics of the weathering process and the synthetic hematites were revealed in clays by TEM. Total chemical analysis of clays revealed extensive loss of Ca, and Na and the concentration of Fe and Al. Mineralogical studies of clays by XRD showed that micas were almost completely weathered to kaolinite, vermiculite-kaolinite intergrade, hematite, gibbsite, while halloysites from other primary minerals. Some dioctahedral mica appeared to be resistant in the soils. Parent rock of the soils contained a considerable amounts of biotites and this forest soils showed especially a dominant characteristics of biotite weathering.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.80-87
• /
• 2010

This study was conducted to develop a reservoir modelling workflow to reproduce the heterogeneous distribution of effective permeability that impacts on the performance of SAGD (Steam Assisted Gravity Drainage), the in-situ bitumen recovery technique in the Athabasca Oil Sands. Lithologic facies distribution is the main cause of the heterogeneity in bitumen reservoirs in the study area. The target formation consists of sand with mudstone facies in a fluvial-to-estuary channel system, where the mudstone interrupts fluid flow and reduces effective permeability. In this study, the lithologic facies is classified into three classes having different characteristics of effective permeability, depending on the shapes of mudstones. The reservoir modelling workflow of this study consists of two main modules; facies modelling and permeability modelling. The facies modelling provides an identification of the three lithologic facies, using a stochastic approach, which mainly control the effective permeability. The permeability modelling populates mudstone volume fraction first, then transforms it into effective permeability. A series of flow simulations applied to mini-models of the lithologic facies obtains the transformation functions of the mudstone volume fraction into the effective permeability. Seismic data contribute to the facies modelling via providing prior probability of facies, which is incorporated in the facies models by geostatistical techniques. In particular, this study employs a probabilistic neural network utilising multiple seismic attributes in facies prediction that improves the prior probability of facies. The result of using the improved prior probability in facies modelling is compared to the conventional method using a single seismic attribute to demonstrate the improvement in the facies discrimination. Using P-wave velocity in combination with density in the multiple seismic attributes is the essence of the improved facies discrimination. This paper also discusses sand matrix porosity that makes P-wave velocity differ between the different facies in the study area, where the sand matrix porosity is uniquely evaluated using log-derived porosity, P-wave velocity and photographically-predicted mudstone volume.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.97-103
• /
• 2006

Telomeres are essential for chromosome stability and are related with cell senescence, apoptosis and cancer. Even though telomere length and telomerase activity have been studied extensively, very little is known to analyze the telomere dynamics in chicken cells. This study was carried out to analyze the telomere distribution and telomerase activity of Korean Native Chicken cells along with aging. The cells were collected from brain, heart, liver, kidney and germinal tissues during physiological stages. Telomere distribution was analyzed by Quantitative-Fluorescence in situ Hybridization (Q-FISH) techniques using the chicken telomeric DNA probe. Telomerase activity was performed by Telomeric Repeat Amplification Protocol (TRAP) assay. In results, the telomeres of chicken were found at the ends of all chromosomes with the interstitial telomeres on chromosomes 1, 2 and 3. The amount of telomeres on chicken cells was decreased along with aging in most tissues. Furthermore, the telomere quantity was significantly different among tissues. The relative amount of telomeres in proliferous cells such as testis cells had much more than those of liver, brain, heart, blood and kidney cells. The telomerase activity was down-regulated in cells of brain, heart and liver tissues. Whereas gonadal cells showed a constitutive activity of telomerase during all stage of life. In conclusions, the telomere quantity and telomerase activity in chicken are closely relate to cell proliferation and tissue specificity during developmental stages and aging. There is also closely correlated between the amounts of telomeric DNA and telomerase activity in chicken tissues.

• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.293-309
• /
• 2024

This study was conducted to provide basic data on the structure of the Carpinus turczaninowii community and the characteristics of the habitat environment for ex situ conservation. To identify the current ecological environment, 27 plots (each measuring 100m²) were selected for analyzing the detailed structure of plant communities in Anmyondo Isl.(Jungjangri San 14-217), Hwanggumsan Mt., Gayasan Mt.(Wonhyobong) and Palbongsan Mt.. The research methodology employed in this study was qualitative analysis. The TWINSPAN classification yielded a total of seven distinct communities. Group I represents the C. turczaninowii - Quercus mongolica community, Group II represents the C. turczaninowii - Pinus densiflora community, Group III represents the C. turczaninowii - P. densiflora community, Group IV represents the C. turczaninowii - Q. mongolica community, Group V represents the C. turczaninowii - Q. variabilis community, Group VI represents the C. turczaninowii - Prunus serrulata Lindl. var. pubescens community, and Group VII represents the C. turczaninowii - Styrax japonicus community. The species diversity ranged from 0.8056 to 1.1568, the importance value ranged from 0.1214 to 0.3024, and the similarity index ranged from 9.37% to 36.36%. Based on the correlation analysis of six environmental factors for the seven communities using RDA ordination, the results indicate that on the first axis, Altitude, Crown density, Bare rock, and Slope exhibited a positive correlation. In the C. turczaninowii - P. densiflora community (Group III) and C. turczaninowii - Q. mongolica community (Group IV), altitude, bare rock, and slope were analyzed as factors influencing vegetation distribution. In the C. turczaninowii - Q. variabilis community (Group V), C. turczaninowii - P. serrulata Lindl. var. pubescens community (Group VI), and C. turczaninowii - S. japonicus community (Group VII), crown density was analyzed as a factor influencing vegetation distribution.