• 제목/요약/키워드: In orbit test

검색결과 251건 처리시간 0.027초

우주발사체의 비행자세 3축 정밀제어를 위한 소형 액체로켓엔진의 펄스모드 응답특성 (Pulse-mode Response Characteristics of a Small LRE for the Precise 3-axes Control of Flight Attitude in SLV)

  • 정훈;김종현;김정수;배대석
    • 한국추진공학회지
    • /
    • 제17권1호
    • /
    • pp.1-8
    • /
    • 2013
  • 단일액체추진제 하이드라진 추력기는 간단한 구조, 우수한 추진제 저장성, 깨끗한 반응생성물 기체 등과 같은 장점으로 수많은 우주비행체의 궤도 및 자세제어시스템으로 적용되고 있다. 우주발사체의 자세제어시스템에 적용하기 위한 중형급 하이드라진 추력기가 설계 제작되었으며, 성능검증을 위해 수행된 개발모델 추력기의 지상연소시험 결과를 추력, 임펄스 비트, 그리고 엔진 구성품별 온도 및 압력 등을 통하여 제시한다. 개발모델 엔진은 매우 우수한 추력 응답성과 재현성을 보였고, 그 추력성능 효율은 이론설계치 대비 93% 이상임을 확인할 수 있었다.

Analysis and Test results for the EOS(Electro Optical Subsystem) geometric mapping of the KOMPSAT2 Telescope

  • Jung Dae-Jun;Jang Hong-Sul;Lee Seung-Hoon
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.489-492
    • /
    • 2005
  • As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

  • PDF

Monte Carlo 법을 이용한 플라즈마 내의 이온 운동 해석 (alysis of ion motion in fusion plasma by Monte Carlo Simulation)

  • 이홍식;황기웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1989년도 하계종합학술대회 논문집
    • /
    • pp.447-450
    • /
    • 1989
  • Single particle orbit in plasma is obtained by drift Hamiltonian formulation in magnetic coordinate. The collisional effect is implied by Monte Carlo Method and the velocity space diffusion, energy transfer to the back ground plasma and the variation of energy distribution of test particles are investigated from many particles analysis.

  • PDF

인공위성 개발을 위한 유닛 열시험 개요와 실제 (Overview of Thermal Test and Practice in Developing Satellite)

  • 서정기;장태성;차원호
    • 한국항공우주학회지
    • /
    • 제41권11호
    • /
    • pp.915-920
    • /
    • 2013
  • 인공위성 내부 유닛들이 위성에 실장 되기 위해서는 각 위성 프로그램에서 요구하는 다양한 환경시험을 반드시 통과해야 한다. 최근 타 분야의 기술이 우주분야로 이전되면서 다양한 인공위성 탑재체들이 개발되고 있다. 하지만, 타분야 개발자의 경우 우주개발에 대한 경험 및 이해부족으로 발사 및 우주환경시험을 수행함에 있어 다양한 문제점을 접하게 된다. 본 기술논문에 위성개발 각 단계에서 수행되는 열시험의 개념을 서술하여 우주분야 기술개발을 처음으로 수행하는 개발자가 열시험을 준비하는데 실제적인 도움을 주고자 한다.

Development of KOMPSAT-2 Vehicle Dynamic Simulator for Attitude Control Subsystem Functional Verification

  • Suk, Byong-Suk;Lyou, Joon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.1465-1469
    • /
    • 2003
  • In general satellite verification process, the AOCS (Attitude & Orbit Control Subsystem) should be verified through several kinds of verification test which can be divided into two major category like FBT (Fixed Bed Test) and polarity test. And each test performed in different levels such as ETB (Electrical Test Bed) and satellite level. The test method of FBT is to simulate satellite dynamics with sensors and actuators supported by necessary environmental models in ETB level. The VDS (Vehicle Dynamic Simulator) try to make the real situation as possible as the on-board processor will undergo after launch. The purpose of FBT test is to verify that attitude control logic function and hardware interface is designed as expected with closed loop simulation. The VDS is one of major equipments for performing FBT and consists of software and hardware parts. The VDS operates in VME environments with target board, several commercial boards and custom boards based on the VxWorks real time operating system. In order to make time synchronization between VDS and satellite on-board processor, high reliable semaphore was implemented to make synchronization with the interrupt signal from on-board processor. In this paper, the real-time operating environment used on VDS equipment is introduced, and the hardware and software configurations of VDS summarized in the systematic point of view. Also, we try to figure out the operational concept of VDS and AOCS verification test method with close-loop simulation.

  • PDF

Satellite FEM Validation test for High Frequency Jitter Analysis

  • Oh, Shi-Hwan;Yong, Ki-Lyuk
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2008년도 한국우주과학회보 제17권2호
    • /
    • pp.28.4-29
    • /
    • 2008
  • The aim of the test is to provide an experimental basis to validate the prediction of the FEM for high frequency jitter analysis due to reaction wheel. The principle is to measure structural transfer functions between the input disturbances at RWA base plate and the accelerations near the end tips of payload, in a configuration close to the operational model. The spacecraft shall have to be suspended, in order to be representative of on-orbit boundary conditions. The results of the test shall be compared to the output of the FEM analysis, and if needed, local upgrades of the FEM and/or margin policy shall be defined in order to guarantee a good test/FEM consistency. Test results were compared with the transfer functions of the FEM, which is globally tuned based on the results of vibration test and consequently have lower damping coefficients values than 1% in the frequency range of 60~200Hz. The damping coefficients estimated from the figures of FRF test results are different from the theoretical FEM, but the magnitude trend of FRF of the test results is somewhat similar with the analytical, it is expected that the overall jitter effect of final estimation is nearly same with the preliminary analysis result in which the damping coefficients were assumed to be 1% for all modes in FEM.

  • PDF

Ranging Data Accuracy in K13 S-Band Antenna

  • Ahn Sang-il;Park Dong-Chul
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.464-466
    • /
    • 2004
  • Ranging and 2-way Doppler measurements are very essential source for orbit determination in LEOP (Launch and Early Operation). This paper shows ranging system features of 13M TT &C antenna and test results recently acquired with KOMPSAT-l. Ranging and 2-way Doppler measurements were compared with KOMPSAT-I GPS telemetry data. Through comparison, it was found that constant and accurate ranging measurements are available with 13M antenna system. Ranging and Doppler measurement function is expected to be used for KOMPSAT-1 and KOMPSAT-2.

  • PDF

COSPAS-SARSAT 406 MHz 개인용 탐색구조 단말기의 기술기준 분석 (Analysis of COSPAS-SARSAT 406 MHz Personal Locator Beacon Specification)

  • 정기룡;정성훈;임종근
    • 한국항행학회논문지
    • /
    • 제22권6호
    • /
    • pp.514-521
    • /
    • 2018
  • COSPAS-SARSAT 406 MHz 조난용 비콘에는 항공용의 ELTs (emergency locator transmitter), 선박용의 EPIRBs (emergency position indicating radio beacon), 개인용의 비콘인 PLBs(personal locator beacons)가있으며, 406 MHz 조난주파수로 부호화된 메시지를 발사하여 조난 시 탐색과 구조를 위한 경보를 보내는 데 사용한다. COSPAS-SARSAT 기술문서인 C/S T.001과 T.018은 조난용 비콘 개발에 필요한 기본 기술정보와 메시지 구성방법, 형식승인을 위한 시험방법 등을 포함하고 있다. 기존의 저궤도와 정지궤도위성을 사용하는 COSPAS-SARSAT 시스템은 반송링크서비스(RLS; return link service) 기능이 없어 조난자가 조난신호의 발사여부를 확인할 수 없었으나 새롭게 추가된 중궤도 위성 시스템은 RLS 기능이 도입되어 확인이 가능하게 됐다. 이 논문은 개선된 중궤도 위성을 활용한 406 Mhz의 PLB와 121.5 Mhz의 호밍 신호 발생기, 243 MHz의 항공용 VHF AM 송신기를 통합하는 탐색구조 단말기 개발에 필요한 C/S T.001과 T.018을 분석하였다.

Performance Test for the SIGMA Communication System

  • Jeong, Seonyeong;Lee, Hyojeong;Lee, Seongwhan;Shin, Jehyuck;Lee, Jungkyu;Jin, Ho
    • Journal of Astronomy and Space Sciences
    • /
    • 제33권4호
    • /
    • pp.335-344
    • /
    • 2016
  • Scientific CubeSat with Instruments for Global Magnetic Fields and Radiations (SIGMA) is a 3-U size CubeSat that will be operated in low earth orbit (LEO). The SIGMA communication system uses a very high frequency (VHF) band for uplink and an ultra high frequency (UHF) band for downlink. Both frequencies belong to an amateur band. The ground station that communicates with SIGMA is located at Kyung Hee Astronomical Observatory (KHAO). For reliable communication, we carried out a laboratory (LAB) test and far-field tests between the CubeSat and a ground station. In the field test, we considered test parameters such as attenuation, antenna deployment, CubeSat body attitude, and Doppler frequency shift in transmitting commands and receiving data. In this paper, we present a communication performance test of SIGMA, a link budget analysis, and a field test process. We also compare the link budget with the field test results of transmitting commands and receiving data.

SYSTEM DESIGN OF THE COMS

  • Lee Ho-Hyung;Choi Seong-Bong;Han Cho-Young;Chae Jong-Won;Park Bong-Kyu
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.645-648
    • /
    • 2005
  • The COMS(Communication, Ocean and Meteorological Satellite), a multi-mission geo-stationary satellite, is being developed by KARl. The first mission of the COMS is the meteorological image and data gathering for weather forecast by using a five channel meteorological imager. The second mission is the oceanographic image and data gathering for marine environment monitoring around Korean Peninsula by using an eight channel Geostationary Ocean Color Imager(GOCI). The third mission is newly developed Ka-Band communication payload certification test in space by providing communication service in Korean Peninsula and Manjurian area. There were many low Earth orbit satellites for ocean monitoring. However, there has never been any geostationary satellite for ocean monitoring. The COMS is going to be the first satellite for ocean monitoring mission on the geo-stationary orbit. The meteorological image and data obtained by the COMS will be distributed to end users in Asia-Pacific area and it will contribute to the improved weather forecast.

  • PDF