• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.35.1-35.1
• /
• 2008

The importance on the simulation of earth observation optical payloads has been recently emphasized in order to estimate on-orbit imaging performance of the payloads. The estimation should consider all aspects of payload development; design, manufacture, test, assembly, launch and space environment. Until recently several studies have been focused the evaluation of the individual factors rather than the integrated. This paper presents the development of an integrated payload simulator. The simulator analyzes the payload imaging performance based on MTF(Modulation Transfer Function) calculations of the major factors (Diffraction, Aberration, Detector integration, Image motion and etc.) and the simulator can generate realistic artificial earth images as taken by defined earth observation payloads. The simulator is developed for the use of evaluating pre- and post-launch imaging performance and assisting on-board calibration of COMPSAT-3.

• Satellite Communications and Space Industry
• /
• v.13 no.1 s.28
• /
• pp.72-80
• /
• 2006

통신해양기상위성은 기상관측, 해양관측 및 통신방송의 3가지 임무를 수행하는 정지궤도 복합임무 위성이다. 위성본체는 기존의 화성탐사선(Mars Express) 위성의 구조를 확장하여 새로 개발한 구조체에 기존의 E3000 통신위성 버스에 사용하였던 전기전자 부품 및 추진계를 사용한다. 3축제어 위성으로서 태양전지판은 한 쪽에만 부착되어 있으며, 반대쪽에는 종래의 기상위성이 모멘트 균형을 위하여 갖고 있었던 솔라세일(solar sail)을 갖고 있지 않다. 기상탑재체는 미국의 아이티티(ITT)가 제작 공급하고, 해양탑재체는 이에이디에스 아스트리움(EADS Astrium)사와 항공우주연구원이 공동으로 개발하며, 통신 탑재체는 전자통신연구원에서 개발한다. 지상국은 항공우주연구원이, 관제시스템은 전자통신연구원이 개발을 담당하고 있다. 개발의 전 과정이 해외협력 개발로 이루어진다. 설계는 프랑스의 뚤르즈 소재 이에이디에스 아스트리움(EADS Astrium)사에서 한국 기술진의 참여 하에 이루어지며, 조립 및 시험은 항공우주연구원의 시설을 이용하여 한국에서 이루어진다. 발사준비도 공동으로 수행하고, 발사 후 전이궤도운영은 아스트리움사의 지상국을 사용하여 수행하여 목표궤도에 진입시킨 후 항공우주연구원의 지상국에서 궤도 내 시험(in-orbit-test)를 완료한 후 위성을 인도 받는다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.151-154
• /
• 2007

The purpose of this study is to identify the basic concept of thruster design through the visualization firing test on a hydrazine thruster. We designed the visual catalyst bed on the basis of the 1lbf hydrazine thruster for a low earth orbit satellite and observed visually the internal catalyst bed reaction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1286-1291
• /
• 2000

A new electro-rheological squeeze film damper (ER SFD) has been sealed with slotted piston rings which have electrodes at the inside of the constant gap. The slotted ER SFD can prevent the problem of electric discharge which might be occurred in the previous configuration of an ER SFD. The current paper presents the extraction of linearized dynamic coefficients within small orbit where these coefficients are controlled by the application of electric strength. Test rig has been modified to isolate the damper section for dynamic coefficient extraction. The results show that rotordynamic coefficients, damping and inertia terms, increase with increasing supply voltages, while stiffness coefficients decrease with increasing supply voltages. Rotating speed of rigid Shaft does not affect these coefficients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.533-539
• /
• 2013

Number of components and payload systems installed in satellites were found to be exposed to various disturbance sources such as the reaction wheel assembly, the control moment gyro, coolers, and others. A micro-level of vibration can introduce jitter problems into an optical payload system and cause significant degradation of the image quality. Moreover, the prediction of on-orbit vibration effects on the performance of optical payloads during the development process is always important. However, analyzing interactions between subsystems and predicting the vibration level of the payloads is extremely difficult. Therefore, this paper describes the analytical and experimental approach to microvibration effects on satellite optical payload performance with integrated jitter analysis framework, micro vibration emulator and satellite structure testbed.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1029-1034
• /
• 2000

A new electro-rheological squeeze film damper (ER-SFD) has been sealed with slotted piston rings which have electrodes at the inside of the constant gap. The slotted ER-SFD can prevent the problem of electric discharge which might be occurred in the previous configuration of an ER-SFD. The current paper presents the extraction of linearized dynamic coefficients within small orbit where these coefficients are controlled by the application of electric strength. Test rig has been modified to isolate the damper section for dynamic coefficient extraction. The results show that rotordynamic coefficients, damping and inertia terms, increase with increasing supply voltages, while stiffness coefficients decrease with increasing supply voltages. notating speed of rigid shaft does not affect these coefficients.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.907-909
• /
• 1995

The SaTReC is to develop, deploy, and operate a low Earth orbiting small satellite system, KITSAT-3, carrying a remote sensing payload, a space science payload, and a data collection system. Through the development of KITSAT-3, the SaTReC is to demonstrate the small satellite system which provides highly accurate attitude control, high speed data transmission, and a unique spacecraft configuration and to provide educational opportunities to Korean space industries and research institute. The KITSAT-3 is expected to be launched in the beginning of 1997 by Chinese Long March IV as a secondary payload into about 800 km's sunsynchronous orbit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.212-217
• /
• 2016

The S-band receiver for Low Earth Orbit satellite is designed and fabricated as engineering model. Demodulator is implemented by using FPGA for extension of demodulator method. The receiver consists of RF Block, Digital demodulator and Power stage and has a Doppler tracking function to compensate a frequency shift that occur on the operation. The measured results of fabricated receiver show BER of less than $1.0{\times}10^{-6}$ at -110dBm RF input power and equipped a frequency tracking of ${\pm}100KHz$ relative to the center frequency. TID test was satisfied with the results of the test criterion is 10krad.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.100-109
• /
• 2005

This paper introduce electromagnetic environmental requirements, test procedures and test results for the Command Telemetry Unit(CTU), which is engineering qualification model for communication satellite in geostationary earth orbit. Also, through debugging of the CTU during the Electro Magnetic Compatibility(EMC) tests, this paper evaluates characteristics of noise generated by the CTU. It is also obtained that better EMC performance can be acquired by improving electrical power converter module of the CTU.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.120-124
• /
• 2003

KAISTSAT- 4, an experimental small satellite, is being developd by Satellite Technology Research Center in KAIST as a sequel mission to KITSAT-1, 2, and 3. The flight model scheduled to be launched in 2003, the qualification model construction and testing have been completed recently. The satellite subsystems of the qualification model have been tested under a thermal vacuum environment harsher than expected in the orbit. Thermal balance test has also been done in order to evaluate and tune the thermal analysis model of the qualification model. This paper describes the thermal vacuum test procedure, the results, as well as the lessons learned during the tests, which can be useful for future thermal vacuum tests of small satellites.