• 한국항해학회지
• /
• 제22권3호
• /
• pp.17-25
• /
• 1998

This paper describes elemental technologies for the creation of three-dimensional(3-D) sound-field to implement the next-generation Ship Handling Simulator with human -computer interaction, known as Virtual Reality. In the virtual reality system, Head-Related Transfer Functions(HRTF's) are used to generate 3-D sound environmental context. Where, the HRTF's are impulse response characterizing the acoustical transformation in a space. This work is divided into two parts, the part Ⅰis mainly for the model constructions of the HRTF's, the part Ⅱis for the control of 3-D sound-field by using the HRTF's . In this paper, as first part, we search for the theory to formulate models of the HRTF's which reduce the dimensionalityof the formulation without loss of any directional information . Using model HRTF's we report results from psychophysical tests used to asses the validity of the proposed modleing method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2314-2316
• /
• 1999

This study describes the results of aging characteristics of polymer insulators through the tracking wheel test. In order to evaluate the reliability of polymer insulators, 4 polymer insulators which used in the field were selected. Electrical tests such as power frequency voltage test, steep-front impulse voltage test were performed after tracking wheel test. Chemical structure and contact angle were measured for investigating an aging characteristics. Although some changes have occurred on the surface of insulator, there are no critical changes between new and tracking wheel tested insulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1737-1739
• /
• 1997

We describe the characteristic of LVI test system and methods to detect the deformation of windings in the power transformers. As the front rise time of recurrent-surge generator pulse less than 1000ns and the peak value of pulse is about 500V, we have the good results of detecting winding deformation in the LVI test of transformer. And we discuss the application of LVI test method and the condition of RSG pulse through results of in one and three pole transformers under Lab. tests.

• 경영과정보연구
• /
• 제27권
• /
• pp.131-147
• /
• 2008

The study examines common component existing in five Asian countries from 1991 to 2007. To do this, the daily stock market indices of Korea, Malaysia, Thailand, Indonesia, and the Philippines were used. Using a Vector Autoregressive Model this paper analyzes causal relations and dynamic interactions between five Asian stock markets. The findings in this study indicate that level of five Asian stock markets' stock return linkages are low. First, from the statistics for pair-wise Granger causality tests, I find Granger-causal relationship between Korea and Indonesia and between Malaysia and and Indonesia. Second, from the results of response function and the statistics of variance decomposition, I find that week shocks to Korean stock market return on Malaysia, Indonesia, Thailand, and the Philippines stock market returns. The results indicate increased Asian stock market linkages but the level is very low. This implies that the benefits of diversification within the five Asian stock markets are still existed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.219-231
• /
• 2004

The Charpy and Izod impact tests are the most prevalent techniques used to characterize the effects of high impulse loads on polymeric materials. An analysis method for rubber toughened PVC is suggested to evaluated critical dynamic strain energy release rates(G$_c$) from the Charpy impact tester was used to extract ancillary information concerning fracture parameters in additional to total fracture energies and maximum critical loads. The dynamic stress intensity factor KID was computed for varying amounts of rubber contents from the obtain maximum critical loads and also toughening effects were investigated as well. The fracture surfaces produced under low velocity impact for PVC/MBS composites were investigated by SEM. The results show that MBS rubber is very effective reinforcement material for toughening PVC.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.135-140
• /
• 2010

The high specific impulse of the ramjet engine, combined with the ability of a gel to carry metal particles, make the Gel Fuel Ramjet a most adequate solution for a mid-high range sustainer. The goal of the present study is to verify experimentally the feasibility of such a concept. A test facility and a lab-scale motor have been designed and built to investigate atomization, ignition and firing processes of a gel hydrocarbon fuel, with and without metal additives, as well as to check the ramjet operation as a whole. The present paper presents the experimental system in detail as well as qualitative results of a few firing tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.767-770
• /
• 2000

This study was investigated for searching a cause of flashover failure of polymer insulator and preparing countermeasures. Hydrophobicity, microstructure and chemical structural change of polymer weathershed were studied by polymer characterization methods. In addition, the electrical properties such as power frequency dry flashover voltage/impulse voltage tests, contamination characteristics were carried out. The hydrophobicity of polymer weathershed was decreased significantly and cracks were observed on the surface. Also, the electrical characteristics did not satisfy the KEPCO specification. The failed polymer insulators showed the more leakage current than 4 years service-aged ones. From the result, it can be concluded that the flashover failure of polymer insulator was attributed to the surface aging and severe contamination.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.216-217
• /
• 2007

This paper represents the reliability assessment on the mould type combined transformer used in the distribution system by electrical tests. For the reliability assessment, we had tested lightning impulse test, short-circuit withstand capability test, electrical accelerated life test and so on to the mould type combined transformer of Young-Hwa Industrial Electric Co., Ltd.

• Wind and Structures
• /
• 제28권3호
• /
• pp.171-180
• /
• 2019

This paper presents a restart iterative approach for time-domain flutter analysis of long-span bridges using the commercial FE package ANSYS. This approach utilizes the recursive formats of impulse-response-function expressions for bridge's aeroelastic forces. Nonlinear dynamic equilibrium equations are iteratively solved by using the restart technique in ANSYS, which enable the equilibrium state of system to get back to last moment absolutely during iterations. The condition for the onset of flutter instability becomes that, at a certain wind velocity, the amplitude of vibration is invariant with time. A long-span suspension bridge was taken as a numerical example to verify the applicability and accuracy of the proposed method by comparing calculated results with wind tunnel tests. The proposed method enables the bridge designers and engineering practitioners to carry out time-domain flutter analysis of bridges in commercial FE package ANSYS.

• 항공우주산업기술동향
• /
• 제8권2호
• /
• pp.86-97
• /
• 2010

본 논문은 케로신 액체로켓엔진에서 세계 최고의 기술력을 갖고 있는 러시아와 우크라이나의 액체로켓 엔진 개발과정 및 동향을 살펴보았다. 구소련에서는 1960년대에 closed cycle을 채택하여 엔진의 연소압과 비추력을 최대한 높이는데 주력하였다. 그러나 1990년대 이후 경제적으로 어려워지면서 새로운 엔진개발에 드는 비용을 최소화하고 있으며, 이를 위하여 유사업종의 업체 간의 합병을 진행했고, 새로운 엔진개발에 기존의 부품을 최대한 사용하거나 시험-개선과정의 합리화를 통하여 시험엔진개수와 시험횟수를 줄이고 있다. 또한 국제 협력을 통하여 우주발사체시장에서 상업용 로켓을 위한 엔진 납품을 증가시키고 있다. 더불어 3성분이나 메탄 엔진 등 차세대 엔진 개발에도 주력하여 액체로켓엔진의 선두주자로서의 지위를 유지하려는 노력이 계속되고 있다.