• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1599-1610
• /
• 2019

Intelligent services have expanded as Internet of Things (IoT) technology has evolved and new requirements emerge to accommodate various services. One new requirement is transmitting data over long distances with low-power. Researchers have developed low power wide area (LPWA) network technology to satisfy the requirement; this can improve IoT network infrastructure and increase the range of services. However, network coverage expansion causes several problems. The traffic load is concentrated at a specific gateway, which causes network congestion and leads to decreased transmission efficiency. Therefore, the approach proposed in this paper attempts to recognize and then avoid congestion through gateway channel hopping. The LPWA network employs multiple channels, so wireless channel hopping is available in a gateway. Devices that are not delay sensitive wait for the gateway to reappear on their wireless channel; delay sensitive devices change the wireless channel along the hopping gateway. Thus, the traffic load and congestion in each wireless channel can be reduced improving transmission efficiency. The proposed approach's performance is evaluated by computer simulation and verified in terms of transmission efficiency.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.169-187
• /
• 1994

The efficiency of marketing channel of distribution between a sholesaler and a retailer with uncertain characteristics can be improved by influencing the retailer's ordering pattern. The wholesaler with large unit invetory holding cost can offer a large quantity discount tanks to the great benefit which comes from the transfer of part of his inventory to retailer. The retailer's increasing average inventory holding cost can be offset by the quantity discount and by savings of the ordering cost. Conditions under which marketing channel improvement can be possible are derived.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.107-113
• /
• 2011

An OFDMA(Orthogonal Frequency Division Multiple Access) includes a MIMO(Multi-Input Multi-Output) scheme for improving spectral efficiency and data throughput. Recognizing that the performance of MIMO system is heavily dependent upon the accuracy of channel estimation, we propose a novel channel estimation for the MIMO scheme based on OFDMA. Conventional interpolation-based channel estimation suffers from poor estimation error at specific subcarriers. Proposed scheme makes use of a planar interpolation instead of linear interpolation for those subcarriers of bad accuracy. Simulation results show that the proposed scheme improves the performance of MIMO system by improving the accuracy in channel estimation especially for the adverse subcarrier positions. It is observed that the proposed scheme outperforms the conventional method by about 2dB in terms of both mean squared error and overall bit error rate with a reasonable computational complexity.

• 한국통신학회논문지
• /
• 제33권5A호
• /
• pp.549-560
• /
• 2008

본 논문은 무선 네트워크 환경에서 채널 효율성을 높이기 위하여 두 개의 인터페이스를 사용하는 새로운 멀티채널 MAC 프로토콜을 제안하였다. 멀티채널 환경에서 기존에 제안된 대부분의 연구들은 컨트롤 메시지를 교환하기 위하여 공통 컨트롤 채널을 사용하였는데, 이것은 데이터 채널이 증가할 때 공통 컨트롤 채널에서 병목 현상을 야기 시킨다. 본 논문에서는 제안하는 멀티채널 MAC 프로토콜은 송수신용 채널을 분리하여 데이터와 컨트롤 패킷을 동시에 송수신하여 전체 네트워크 처리량을 높이고, 공통 컨트롤 채널이 없기 때문에 병목현상 문제가 발생하지 않는다. 또한 TDMA 방식을 사용하여 데이터 패킷과 컨트롤 패킷의 충돌을 피할 수 있고, 멀티채널환경에서 송수신 인터페이스가 다를 경우 발생하는 CTS 패킷이나 ACK 패킷의 충돌 가능성을 줄였다. 모의실험결과는 제안된 멀티채널 MAC 프로토콜이 기존의 방법과 비교해서 전체 네트워크 처리량과 채널 효율성을 크게 향상시키는 것을 보여준다.

• ETRI Journal
• /
• 제45권4호
• /
• pp.557-569
• /
• 2023

Traditional deterministic channel modeling is accurate in prediction, but due to its complexity, improving computational efficiency remains a challenge. In an alternative approach, we investigated a multilayer artificial neural network (ANN) to predict large-scale and small-scale channel characteristics in metro tunnels. Simulated high-precision training datasets were obtained by combining measurement campaign with a ray tracing (RT) method in a metro tunnel. Performance on the training data was used to determine the number of hidden layers and neurons of the multilayer ANN. The proposed multilayer ANN performed efficiently (10 s for training; 0.19 ms for prediction), and accurately, with better approximation of the RT data than the single-layer ANN. The root mean square errors (RMSE) of path loss (2.82 dB), root mean square delay spread (0.61 ns), azimuth angle spread (3.06°), and elevation angle spread (1.22°) were impressive. These results demonstrate the superior computing efficiency and model complexity of ANNs.

• 한국통신학회논문지
• /
• 제35권2A호
• /
• pp.153-164
• /
• 2010

본 논문은 무선 애드혹 네트워크에서 채널 효율성 및 네트워크 성능 향상을 위한 멀티채널 MAC 프로토콜을 제안한다. 멀티채널 MAC 프로토콜 설계에는 랑데부 문제(rendezvous problem)와 멀티채널 히든 노드 문제 등 두개의 주요한 문제가 있다. 기존에 제안된 여러 멀티채널 MAC 프로토콜에서는 하나의 채널을 공통 컨트롤 채널로 사용하여 컨트롤 패킷 교환을 통해 이러한 문제들을 해결하였는데, 이것은 데이터 채널이 증가할수록 높은 경쟁으로 인한 공통 컨트롤 채널의 병목 현상을 초래하여 비효율적인 데이터 채널 이용의 원인이 된다. 본 논문에서 제안하는 멀티채널 MAC 프로토콜은 멀티채널 히든 노드 문제를 해결하기 위해 TDMA 방식을 사용하였고, 데이터를 동시에 송수신할 수 있도록 하여 네트워크 성능을 높인다. 또한 공통 컨트롤 채널을 사용하지 않기 때문에 공통 컨트롤 채널 병목 현상이 발생하지 않고, 전송 또는 수신할 데이터가 없는 노드는 슬립(sleep) 상태를 유지하도록 하여 에너지 절감(energy savings)이 가능하다. 모의실험결과는 제안한 MAC 프로토콜이 기존의 방법에 비해 네트워크 성능 및 채널 효율성을 향상시키고 에너지를 절감할 수 있다는 것을 보여준다.

• International Journal of Fluid Machinery and Systems
• /
• 제5권3호
• /
• pp.100-108
• /
• 2012

Design parameters for suction channels of process centrifugal compressors were investigated, and an optimization method to enhance stage efficiency by using the new design parameters was proposed. From results of computational fluid dynamics, the passage sectional area ratios $A_c/A_e$, $A_e/A_s$ and $A_c/A_s$ were found to be the dominant parameters for the pressure loss and circumferential flow distortion, where $A_c$, $A_e$ and $A_s$ are passage sectional areas for the casing upstream side, casing entrance and impeller eye, respectively. The Base suction channel was optimized using the new design parameters, and the Base and Optimized types were tested. Test results showed that the Optimized suction channel achieved 3.8% higher stage efficiency than the Base suction channel while maintaining the same operating range.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4367-4386
• /
• 2015

The concept of Internet of Things (IoT) has shed new light on WSN technologies. MAC protocol issues improving the network performance are important in WSNs because of the increase in demand for various applications to secure spectrum resources. Cognitive radio (CR) technology is regarded as a solution to the problems in this future wireless network. In recent years, energy efficiency has become an issue in CR networks. However, few relevant studies have been conducted. In this paper, an energy-efficient non-overlapping channel MAC (ENC-MAC) for CR-enabled sensor networks (CRSNs) is proposed. Applying the dedicated control channel approach, ENC-MAC allows the SUs to utilize channels in a non-overlapping manner, and thus spectrum efficiency is improved. Moreover, the cooperative spectrum sensing that allows an SU to use only two minislots in the sensing phase is addressed to en-hance energy efficiency. In addition, an analytical model for evaluating the performance, such as saturation throughput, average packet delay, and network lifetime, is developed. It is shown in our results that ENC-MAC remarkably outperforms existing MAC protocols.

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.69-76
• /
• 2011

PEMFC (polymer electrolyte membrane fuel cell) is device that generates electricity from hydrogen. It is one of the subjects related to renewable energy and various research has been conducted on the PEMFC. PEMFC has low operating temperature and high efficiency among fuel cells, and is given attention as means for automobile and domestic use. Analysis of flow field pattern in supplying hydrogen and oxygen is part of the research to increase PEMFC efficiency. In this study, separation plate currently used in PEMFC is transformed to wave shape and mass transfer characteristics in the channel is examined through numerical and experimental analysis. Wave shape separation plate yielded 18% increase of efficiency compared to separation plate used in normal channel. And improvements in mass transfer characteristics were verified.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.