• The Journal of Society for e-Business Studies
• /
• v.9 no.2
• /
• pp.33-50
• /
• 2004

This paper presents the evaluation model which is included in a quantitative evaluation methodology for evaluation processes of validity and effectiveness of information budget investment and improving conformance of ROI(Return On Investment). That is, the right efficiency targets of information investment for the development project to GDOC (Government electronic Document Distribution Center), and KPls(Key Performance Indexes) which enable to evaluate objectively effectiveness in the preliminary and post evaluation phases are developed, and then the results were come out by practical investigation study using quantitative evaluation methodology.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.90-94
• /
• 2003

Recently, many nations have released standard such as IEC 1000-3-2 and IEEE 519 which impose a limit on the harmonic current drawn by equipment connected to AC line in order to prevent the distortion of an AC line. Among the wide variety of active methods for improving power factor and harmonic distortion, the boost converter is very effective because it has a continuous line current , small choke filter and high power factor. In high power application, however, the bridge diode loss in the boost converter has made the efficiency lower and the temperature of the board higher. A new approach without bridge diode to make the same characteristics of the conventional boost converter has also been developed. This paper present the comparisons between the continuous current mode(CCM) operated conventional boost converter and the boundary current mode(BCM) operated the bridgeless boost converter for high efficiency and high power factor.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.212-216
• /
• 1998

For a Switched Reluctance Motor(SRM) drive, the important things are 1) reducing torque ripple, 2) improving efficiency, 3) sensorless speed control, 4) accurate position. The position information impotant for the efficiency and smoothness drives. Since SRMs characteristics are nonlinear. It is difficult to estimated phase current in saturation region. This paper describes a method for indirect sensing of the rotor position in SRM which use both voltage and current. The method obtains rotor position by using unconducting phase. The information about the rotor position is achieved by differentiating the unconducting phase current or the voltage gradient. And then, this paper presents a torque control with indirect rotor position detection methods. This torque control is achieved by developing a detailed nonlinear model of the motor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.583-585
• /
• 2002

The effects of phosphor properties such as the granular sizes and shape on the crosssectional shape of phosphor layer and plasma discharge characteristics for improving the luminance and luminous efficiency in ac PDP have been investigated. As the granular size decreases, the thickness of vertical side of barrier rib in blue cell decreases, and wheras the thickness of bottom side increases due to increased dispersibility. In addition, the phosphor with round granular shape showing good dispersibility shows better voltage margin and higher luminous efficiency due to their improved discharge volume and packing density.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.114-120
• /
• 2012

Recently, integrated electric propulsion system has been vigorously adopted into naval vessels. To enhance effectiveness and efficiency of power management in these propulsion systems, this paper investigates necessity of energy storage devices and their operation strategies. By introducing the energy storage devices, engine can operate at higher efficiency point and accordingly costs for fuel and maintenance are significantly reduced. In addition, transient performance can also be improved with support of the devices and it leads to stable operation of shipboard power bus. To validate the proposal of this paper, computer simulation has been conducted with real load data of existing electric propulsion system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.165.1-165.1
• /
• 2011

In this paper, it is intended to study about deferences of design and operation properties between large and small hydro-power house's turbine which type is reaction. In generally, turbine of large hydro-power has a more safe and effective energy output mechanisms than small hydro-power's because the turbine of small hydro-power is more sensitive to hydraulic losses. But, it is more effective for the all energy market to improve the capability and efficiency of small hydro-power in the present status of increasing construction of small hydro-power than large hydro-power. Therefore, we intend to investigate and introduce the way to enhance the efficiencies of reaction turbine adopted to small hydro-power.

• Applied Science and Convergence Technology
• /
• v.27 no.2
• /
• pp.42-45
• /
• 2018

Photovoltaic and optoelectronic devices based on hybrid metal halide perovskites ($MAPbX_3$; $MA=CH_3NH_3{^+}$, $X=Cl^-$, $Br^-$, or $I^-$) are rapidly improving in power conversion efficiency. Also, during recent years, perovskite single crystals have emerged as promising materials for high-efficiency photovoltaic and optoelectronic devices because of their low defect density. Here we show that the light soaking effect of mixed halide perovskite ($MAPbBr_{3-x}I_x$) single crystals can be explained using photoluminescence, time-resolved photoluminescence, and Raman scattering measurements. Unlike Br-based single crystal, Br/I mixed single crystal show a strong light soaking effect under laser irradiation condition that was related to the existence of multiple phases.

• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.87-100
• /
• 1999

A manufacturing environment without a computerized system causes numerous problems, since many important decisions are made based on the experience of veteran staffs. Especially, when a strategy for the improvement of manufacturing efficiency is considered, it is hard to predict the effect of the strategy. A solution to the problem without large investment of the computerized system is the simulation study. This paper shows the modeling and simulation based on DEVS(Discrete Event System Specification). Two types of models are implemented, one for representing the current production strategy and the other for the new strategy. The new strategy is expressed as priority rules within the model. The process in concern is the metal grating production process in which the size of the group, for applying a specific cutting and scheduling strategies, is one of the important factors in improving the production efficiency. Some reliable criteria for the evaluation related to the production effeciency are established from the simulation study.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1511-1517
• /
• 2008

In January, 2005, "railroad security law" was presented, preparing the systematic equipment that allows several railroad operators to consider the railroad security issue, and each of railroad operative institutions accepted such situation that construct the integral railroad security system, resulting in constructing the emergent system coping with the railroad fire accident through the relevant study business to improve the railroad security efficiency against fire. This study tried to present the studying direction on developing the emergent educational program coping with the railroad fire accident, which is distributed to the spot, about the railroad worker for improving the railroad security efficiency against fire through the education of systematic and efficient emergent countermeasure procedure of emergent system against the railroad fire accident.

• Journal of Power System Engineering
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2008

This paper presents an effective cooling dehumidification method to remove odorous gas from food-wastes. The odorous gases, such as Styrene, Ammonia, Hydrogen sulfide and Acetaldehyde, are produced in environments where temperature is $50\sim80^{\circ}C$ and humidity is $40\sim70%$. Under such conditions, experiments are performed reiteratively using experiment equipments. The effect of the cooling dehumidification is measured via measuring instrument, and this research is focused on improving efficiency. The effect of cooling dehumidification using measuring instrument is validated. At $80^{\circ}C$, four type of gases that was mentioned previously showed generally better cooling efficiency with a good result for a component concentration. Among them, hydrogen sulfide gas demonstrated the highest reduction of 50%.