• Journal of Hydrogen and New Energy
• /
• v.29 no.1
• /
• pp.11-18
• /
• 2018

A high efficiency integrated reforming system for improving the efficiency of the 5 kW PEMFC system used as the back up power of building was studied. The separated reforming system consisted of three parts - A steam reformer with two stage concentric circular shape, a heat exchanger type steam generator and a CO shift reactor. Temperature and steam carbon ratio (SCR) were control variables during operation. The operating conditions were optimized based on the thermal efficiency of the steam reformer as reformate gas composition changes at different temperature. In experiments, water was fully vaporized in the steam generator up to SCR 3.5 and the maximum thermal efficiency was achieved at the operating temperature around $700^{\circ}C$ in the steam reforming reactor. With the results of the separated reforming system research, we improved the shape of high efficiency integrated reformer. The performance evaluation of the integrated reformer was based on optimized operating conditions in SCR 3.5. As a result, the developed integrated reforming system maintained an efficiency of 76% and constant performance over 3,000 hours.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.476-486
• /
• 2010

Fishing efficiency of a trawl vessel can be enhanced by increasing the swept area per unit time, which can be attained either by increasing the mouth size of the net, or by increasing the towing speed. To improve fishing and fuel efficiency of trawl vessels targeting fishes of greater mobility, in which the towing speed is more critical in determining fishing efficiency, we conducted a series of model tests to evaluate the performance of the newly-designed nozzle propeller before installing it in a trawl vessel to verify its towing speed and fuel efficiency in the sea. By conducting further model tests in the experimental basin, we redesigned the propeller of stern trawler to improve the resistance and propulsion performance. Through actual fishing operations, we evaluated the improvement in fuel and fishing efficiency by installing the new nozzle propeller. The trawling speed increased by 0.6kts at the same engine power (RPM), while the engine margin increased by more than 20%. The increased towing speed by installing the redesigned propeller is expected to enhance fishing performance through increasing the number of hauling- and casting operations per unit times, while shortening the towing duration. Analysis of the Catch-Per-Unit-Effort (CPUE) data indicated that the mean CPUE of trawl fishery increased from 3.04kg/m in year 2007 to 6.15kg/m in year 2008, confirming enhanced fishing efficiency by adopting the redesigned propeller.

• Journal of Environmental Policy
• /
• v.9 no.3
• /
• pp.143-160
• /
• 2010

This paper estimate the $CO_2$ reduction potential that can be achieved by improving the technical efficiency of input factors in the manufacturing sector. Technical efficiency in each manufacturing firm was estimated using the DEA technique. Depending on the returns-to-scale assumption selected, average technical efficiency was estimated to be between 0.467 and 0.643. These estimates suggest that, when the efficiency of electricity consumption in the manufacturing sector is improved, the overall $CO_2$ emissions can be reduced by 17.1-25.5%. Recently, the Korean government has adopted a low-carbon-green-growth policy with the goal of reducing greenhouse gas emissions by 30% below the BAU level by year 2020. The analysis of the paper suggests that this goal can be achieved through improved efficiency of electricity consumption.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.360-364
• /
• 2016

The rare earth output is concentrated in limited number of countries including China. Also the necessity for development of non-rare earth motor is getting signified due to the rapid increase of rare earth price and resource weaponizing policies. Non-rare earth motor is generally designed as spoke type PMSM (Permanent Magnet Synchronous Motor) in order to maximize the power density. Such spoke type PMSM has advantage in concentrating the flux but demonstrates lower efficiency compared to permanent magnet using Nd (Neodymium) permanent magnet. Therefore, applications with strong necessity for efficiency need rotor structure having improved efficiency compared to spoke type PMSM. Hence, this study suggested fan-shape type PMSM with somewhat lower power density but maximized efficiency. Fan-shape type PMSM is a rotor shape demonstrating outstanding reduction of iron loss compared to existing spoke type. Thus, this study analyzed the improvement of efficiency and reduction of loss arising from the suggested shape through parameter calculation.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.375-381
• /
• 2022

The DEA-BCC model. And the Malmquist index have been used, from static and dynamic perspectives, to measure the eco-efficiency of 30 cities and provinces in China from 2011 to 2020. The results shows that: the average static eco-efficiency of 30 cities and provinces in China is 0.643. Differences exists all over China. While Shanghai and Beijing are ecologically efficient, other 28 cities and provinces are faced with different extents of inefficiency. There are also differences among regions, which generally show the spatial distribution pattern with high efficiency in the eastern regions while low in the western regions. The Malmquist index of eco-efficiency in total 30 cities and provinces shows a healthy growth trend, and the technological progress. Acts as its main driving force. Therefore, eastern regions should enhance the. radiation capacity, strengthen the synergy among regions, give full play to. The advantages of each regions. It is sensible to improve the eco-efficiency by means of optimizing the industrial structure, enhancing the technological level and improving eco-efficiency of China and realizing green development.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.390-397
• /
• 2018

The Municipal Wastewater Treatment Plant(MWTP), located industrial estate, has a problem of decreasing nitrification efficiency. In this research, it was analyzed that effect of heavy metals and retention time to nitrification based on operational result of laboratory scale reactors. And suggest improving MWTP operation method for increasing nitrification efficiency based on findings. According to operational result, laboratory scale reactor shows over 60% nitrification efficiency over hydraulic retention time(HRT) 0.5 day. However, the nitrification efficiency of S MWTP(high heavy metal concentration) sample was lower than that of A MWTP(low heavy metal concentration) sample in same operational condition. The main reason was heavy metals in industrial wastewater. This heavy metals was acted as inhibitor to nitrifier in reactors. So, activity of nitrifier was analyzed based on specific nitrification rate(SNR). The SNR of S MWTP sample shows 0.13 ~ 0.21 mg NH4/gMLSS/hr and that of A MWTP sample shows 0.74 mg NH4/gMLSS/hr. As a result, the activity of nitrifier of S MWTP was lower than that of A MWPT. In other words, retrofit methods for improving nitrification efficiency in MWTPs located industrial estate were that to increase retention time in biological treatment process or to pretreat heavy metal before being injected biological treatment process.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.405-412
• /
• 2022

This paper studies the method of estimating power loss and classifying the factors for improving the power generation efficiency through O&M. It is installed under various climatic conditions worldwide, operational and maintenance technologies suitable for the characteristics of the installation location are required. Existing studies related to solar power generation efficiency have been actively quantifying the impact on short-term losses by environmental factors such as high temperature, dust accumulation, precipitation, humidity, and wind speed, but analysis of the overall impact from a long-term operation perspective is limited. In this study, the potential for efficiency improvement was analyzed by re-establishing a loss classification system according to the power flow of solar power to derive a comprehensive efficiency model for long-term operation and estimating power loss through a case study for each region where climate conditions are classified. As a result of the analysis, the average annual potential for improving soiling loss was 26.9%, Death Valley 7.2%, and Seoul 3.8%. Aging losses was 6.6% in the 20th year as a cumulative. The average annual potential due to temperature loss was 2.9 % for Doha, 1.9% for Death Valley, and 0.2% for Seoul.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.307-327
• /
• 2017

Ecological efficiency is an important index measuring and reflecting the sustainable development level of economy, resources and environment in a region. This paper makes an empirical study on the ecological efficiency of 31 provinces in China in 2014 with the three-stage DEA model. The results show that the three indexes, the total investment in environmental governance (Unit: hundred million Yuan), the second industry proportion(%), and per capita automobile ownership (car/ten thousand people) functioning as the external environmental variables have significantly impacted the regional ecological efficiency. Excluding the impact of the external environment and statistical noise, the technical efficiency of regional ecological efficiency has increased from 0.526 to 0.639, and the pure technical efficiency has increased from 0.650 to 0.858, with the scale efficiency decreased from 0.833 to 0.740, accurately reflecting the regional ecological efficiency level. 31 Chinese provinces are classified into four different types according to the pure technical efficiency and scale efficiency. Every region shall, according to the characteristics of its efficiency, emphasize differently on improving the management level or expanding the scale of production so as to improve the ecological efficiency.

• Journal of Distribution Science
• /
• v.12 no.8
• /
• pp.5-15
• /
• 2014

Purpose - The method of TV home shopping is a kind of retail method that provides the viewer with information about products and, further, sells the products to consumers through the media of television. The domestic home-shopping industry has been expanding since 1995, and there are six companies in this arena as of 2012. In this study, we evaluate the management efficiency of TV home-shopping companies and provide suggestions for improving efficiency, using the DEA (data envelopment analysis) model. Hence, we expect to contribute to the progress of the companies' efficiency and the development of the TV home-shopping industry, where deepening competition is inevitable because it is experiencing the maturing market stage in its life cycle. Research design, data, and methodology - Efficiency is the ratio of the quantity of input to the quantity of output of a product or service. It is necessary to estimate aggregate inputs and aggregate outputs, which are calculated by applying a weighting to a number of input and output factors, to measure the efficiency. The DEA model is divided into the CCR model and the BCC model. The CCR model is a basic model that assumed constant returns to scale (CRS), and the BCC model extends the CCR model to accommodate technologies exhibiting variable returns to scale (VRS), and concerns only the technical efficiency without considering the efficiency of returns to scale. In this study, we consider six companies each year from 2008 to 2012 as a DMU (Decision Making Unit) and analyze the differences in efficiency for each company in each year. Furthermore, we evaluate the operating characteristics of TV home-shopping companies, using three models, in accordance with the overall performance, profitability, and marketability of the business. Results - The result of the analysis, using DEA models, shows that Hyundai Home Shopping (2009, 2010, 2011), GS Home Shopping (2011), NS Home Shopping (2011) and CJ O Shopping (2012) possess MPSS (most productive scale size), with a score 1.0 in CCR, BCC, and scale efficiency. Particularly, Hyundai Home Shopping is shown to be the most efficient in terms of overall business performance, marketability, and profitability. The overall efficiency of the home shopping industry has displayed an increasing trend since 2008, even though it decreased marginally in 2012; further, we can observe that home shopping companies operate with increasing efficiency with the passage of time. Conclusions - Home shopping companies have focused on market expansion rather than profits, as they displayed better efficiency in marketability than increase in profitability during the period 2008-2012. In addition, the main reason for the increased efficiency in the home shopping industry is the market expansion through the revenue increase of each home shopping company. This study can be used as a reference when home shopping companies attempt to devise future strategies, as it suggests efficiency benchmarks and development levels for each home shopping company.

• Korean small business review
• /
• v.41 no.3
• /
• pp.151-172
• /
• 2019

The changes in the 4th industrial revolution era are not limited to specific sectors, but affect all sectors of industry. Thus all companies are required to respond effectively to changes. Some companies response by adopting cutting-edge ICT and some companies improve the organizational structure, or enhance the competence of individual employees. This study is based on the assumption that the responses to the change in the 4th industrial revolution era should not be uniform, and that the response strategies and priorities should vary according to the characteristics of the companies. The purpose of this study is to suggest both different response strategies and the priority of the responding factors(areas) to small and medium-sized enterprises. Data were collected through the semi-Delphi method. As a result of data analysis, the priorities of the medium-sized enterprises were as follows: introduction of IT-strengthening the competence of the individuals - establishing technology infrastructure-improving organizational structure - efficiency of work - improving organizational culture. While the priorities of the response factors(area) of the small-sized companies were as follows: strengthening the competence of the individuals - efficiency of work - introduction of IT - establishing technology infrastructure - improving organizational structure - improving organizational culture.