• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.45-50
• /
• 2021

As the difficulty of flip chip products increases, there is a growing interest in the material of flux, which is safe from the solder wetting and reliability. In the case of no clean flux, there is merit in terms of process efficiency because there is no cleaning process. But Cu migration and delamination can be occurred if the residue remains after the reflow process. In this study, major element materials, solvent and activator, are changed and confirmed effect of non-wet and reliability in the package environment. Stability of materials were secured through storage stability evaluation, and we found out non-wet zero materials through the application of two types of solvent and activator with different boiling point and the increase of activator content. After reliability test, no delamination was found in the plane analysis, which secured the final composition of low residue flux.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.1957-1980
• /
• 2021

The significant aim of this research has always been to evaluate the mechanism for efficient and inherently aware usage of vitality in-home devices, thus improving the information of smart metering systems with regard to the usage of selected homes and the time of use. Advances in information processing are commonly used to quantify gigantic building activity data steps to boost the activity efficiency of the building energy systems. Here, some smart data mining models are offered to measure, and predict the time series for energy in order to expose different ephemeral principles for using energy. Such considerations illustrate the use of machines in relation to time, such as day hour, time of day, week, month and year relationships within a family unit, which are key components in gathering and separating the effect of consumers behaviors in the use of energy and their pattern of energy prediction. It is necessary to determine the multiple relations through the usage of different appliances from simultaneous information flows. In comparison, specific relations among interval-based instances where multiple appliances use continue for certain duration are difficult to determine. In order to resolve these difficulties, an unsupervised energy time-series data clustering and a frequent pattern mining study as well as a deep learning technique for estimating energy use were presented. A broad test using true data sets that are rich in smart meter data were conducted. The exact results of the appliance designs that were recognized by the proposed model were filled out by Deep Convolutional Neural Networks (CNN) and Recurrent Neural Networks (LSTM and GRU) at each stage, with consolidated accuracy of 94.79%, 97.99%, 99.61%, for 25%, 50%, and 75%, respectively.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.813-821
• /
• 2011

While various aspects affect river water quality, reduction of water flow rate during dry seasons is one of the most significant factors causing severe water pollution in river water environment. The aim of this study is to investigate the feasibility of applying a physicochemical method (sand filtration + ozonation) for improving river water quality within a short period. The parameters analyzed and assessed were $COD_{cr}$, BOD, SS and color. The source river water had a severe pollution level showing COD 8.8~17.2 mg/L (ave. 11.9 mg/L), BOD 4.8~13.3 mg/L (ave. 8.3 mg/L), SS 9.0~22.1 mg/L (ave. 12.8 mg/L) and color 34.4~77.1 degree (ave. 56.5 degree) during the experimental periods. The variation trends showed a relatively low correlation between BOD and COD and between color and COD, while SS showed very low correlation with other parameters. The combined process of sand filtration and ozonation showed averaged removal efficiency of COD 37.2%, BOD 48.4%, SS 60.1% and colority 45.1%, respectively. The marked change of BOD level from 8.3 mg/L to 4.3 mg/L under the experimental conditions in this study implied the improvement of class V to class III set by the river water quality standard in Korea.

• International Area Studies Review
• /
• v.21 no.2
• /
• pp.171-196
• /
• 2017

This study employed the Analytical Hierarchy Process (AHP) methodology with the enhancement of the competitiveness of Vietnamese commercial banks set as the overall goal of the model. Analysis of the survey questionnaire based on pair-wise comparisons and collected from experts in the field of banking led to three significant findings. First, banking safety is the most important evaluation criteria for the competitiveness of local commercial banks in Vietnam, followed by operating efficiency, intangible values and large scale. Second, in order to achieve the overall goal of enhancing competitiveness for local banks, securing healthy financial conditions should be made the priority. Effective management systems, strategic human resource planning and high-quality products and services all show strong connections to achieving the evaluation criteria. Third, the study found that bad debt settlement is essential in obtaining healthy financial conditions. In order to introduce effective management systems as well as high-quality products and services, technological advances are very important. Improving the quality of executives and staff is imperative for strategic human resource planning purposes.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.83-92
• /
• 2007

In connectionless packet network, if a sender encrypts packets by block chaining mode and send it to receiver, the receiver should decrypt packets in encrypted order that is not received order. Therefore, the performance and efficiency are lowered for crypto communication system. To solve this problem, we propose packet encryption scheme for connectionless packet network that can decrypt the packets independently, even if the received order of packets are changed or packets are missed. The scheme makes new IV(Initial Vector) using IV that created by key exchange process and salt that made by random number. We propose extended Cryptoki API that added packet encryption/decryption functions and mechanism for improving convenience and performance. We implement the scheme and get result that the performance increased about $1.5{\sim}l5.6$ times compare with in case of implementing using Cryptoki API in the test environment.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.1-15
• /
• 2020

The duty-free industry before COVID-19 has continuously grown since 2000, along with the increase of demand in tourism industry. To cope with the increased demand, the duty free companies have kept the strategies which focused on the sales volume. Therefore, they have developed the ways to increase the volume and capacity, not the efficient operations. In the most of previous research, however, authors have proposed the better strategies for marketing and supporting policies. It is very hard to find the previous research which dealt with the operations like logistics and inventory management. Therefore, in this study, it has been predicted the future demand of frequently purchased items in airport duty free shops based on the estimated number of departing passengers by the linear regression, which concluded with the appropriate inventory level. In addition, it has been analyzed the expected effects by introducing the inventory management policy considering the cost and efficiency of operations. Based on the results of this study, it may be possible to reduce total cost and improve productivity by predicting the excessive inventory problems at duty-free shops and improving cycles of supplying items.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.283-287
• /
• 2021

The purpose of this study is to analyze personalized contents and previews of OTT service based on user experience and to suggest the improvements of the preview viewing experience. Current domestic OTT mobile applications were researched to find out how services are offering content. Plus, the 20s-30s were recruited to analyze user experience. An online survey and in-depth interview were conducted by using Stephen P. Anderson's Creating Pleasurable Interface Model. As a result, preview help users to select content but it doesn't suit their taste. Also, the preview is hard to watch however they want. Therefore, it can be inferred that the preview requires the function for improving efficiency, preference, and accessibility. This study is expected to be used as research material on user experience or preview experience of OTT content.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.188-197
• /
• 2021

In this study, the optimal conditions for hair dyeing using sappan wood (Caesalpinia sappan L.) powder were determined, and then the effect of chitosan treatment on the hair dyeing properties of sappan wood powder was investigated. Treatment of sappan wood powder and water with the ratio of 1:3 (w/w) at 40℃ for 60 minutes was found to be the most effective to hair dyeing. In addition, the pretreatment of low molecular weight (~30 kDa) chitosan at a concentration of 1% (w/w) prior to treatment with sappan wood powder effectively improved and maintained the hair dyeing properties of sappan wood. In conclusion, the low molecular weight chitosan is considered to be of great help as a mordant in improving the dyeing efficiency and retention of sappan wood powder in hair dyeing.

• Journal of Platform Technology
• /
• v.8 no.2
• /
• pp.22-31
• /
• 2020

The construction and operation of industrial automation has been actively taking place from manufacturing plan to production for improving operational efficiency of production line and flexibility of equipment. ISO/TC184 is standardizing on operating methods that can share information of programmable device controllers such as PLC and IoT that are geographically distributed in the production line. In this study, the design of the cell controller consists of PLC group and IoT group that perform signals such as temperature sensors, gas sensors, and pressure sensors for thermal processes and corresponding motors or valves. The operation and analysis of the cell controller were performed using SDN(Software Defined Network) and the three types of process services performed in thermal processes are real-time transmission service, loss-sensitive large-capacity transmission service, and normal transmission service. The simulation result showed that the average loss rate improved by about 17% when the traffic increased before and after the application of the SDN route technique, and the delay in the real-time service was as low as 1 ms.