• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1832-1840
• /
• 1999

Since the existed Korean Web IR systems generally use boolean system, it is difficult to retrieve the information to be wanted at one time. Also, because of the feature that web documents have the frequent abbreviation and many links, the keyword extraction using the inverted document frequency extracts the improper keywords for adding ambiguous meaning problem. Therefore, users must repeat the modification of the queries until they get the proper information. In this paper, we design and implement the relevance feedback agent system for resolving the above problems. The relevance feedback agent system extracts the proper information in response to user's preferred keywords and stores these keywords in preference DB table. When users retrieve this information later, the relevance feedback agent system will search it adding relevant keywords to user's queries. As a result of this method, the system can reduce the number of modification of user's queries and improve the efficiency of the IR system.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.89-100
• /
• 2003

In this research was to analyze 3-D kinematics variables for handspring of basic motion in the heavy gymnastics in order to investigate kinematical difference between expert and novice. Therefore, the purpose of this research was provide quantitative information, systematic provision, rules, establishment of basic skill for improving skill and teaching athletes. And in the research, results were as followings. 1. In the time variables, total time was that expert took 0.745sec and novice took 0.829sec, and as duration time of each event, expert was faster than novice in the all motion event except till second event of the preparation motion. 2. In the center of body variables, vertical direction variables, the displacement of body center hight was that expert showed 61.26% and novice showed 54.48% in the third event of all motion, also all event were showed expert was higher displacement than novice except first of event in preparatory stage. 3. In the angle displacement of main joint, the right direction was that expert showed 154.12degree and novice showed 174.85degree and the left direction was that expert showed 159.29degree and novice showed 171.46degree In the second event of main joint curved point at the same time hand was reached floor. In the angle displacement of knee joint in the third event of all motion, expert showed 155.25degree and novice showed 154.00degree In right, and expert showed 155.24degree and novice showed 154.55degree in left. In this result, both were same motion type. In the angle displacement of hip joint in the third event of the all motion, expert showed 142.80degree and novice showed 134.17degree in right, and expert showed 140.28degree and novice showed 144.94degree in left. In this result, motion pattern of expert was same both sides, but novice was different. According to the results, to increase efficiency of motion and aesthetic effect in the all motion, it should stretch displacement and height of body center and make similarly angle of right and left joint.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.6
• /
• pp.911-918
• /
• 2006

This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.177-185
• /
• 2012

LH applies a uniformly standardized PHC Pile to 15~25 stories of Shear-wall type Apartment Building. Recently it is predicted that LH will construct over 30~40 story Apartment Building to keep varied project condition and faces urgent needs to save construction cost for improving its competitiveness. Therefore, structural analysis and design on the upper part and foundation of apartment building were carried out in this study by subdividing story of apartment building, e.g. 15, 20, 25, 30, 35, 40 stories. Reflecting the result of basement analysis and design, the economic evaluations are performed and the optimum diameters of PHC piles are suggested. The result of this paper is considered to be applied usefully for foundation design of LH apartment housing, and the suggested PHC Piles can be used effectively by increasing efficiency and saving the construction cost of foundation.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.169-177
• /
• 2009

Establishing a public transportation transfer system that can reduce personal automobile use in the CBD and absorb the demand, thereby reducing congestion, is a necessity. However, the current transfer system and facilities are lacking in intermodal connectivity, require long transfer times, have complex flow patterns, and are lacking in information systems and convenience. The design analysis program of this study is to develop a program that executes computations of design analysis of transfer facilities by utilizing the existing design standards for facilities such as facilities for boarding and alighting, elements for convenience, and pedestrian facilities. Developing an analytical tool through which individual or integrated design analysis can be conducted on the design standards of various facilities is an important study for improving the work accuracy and efficiency of designing an actual transfer center.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.302-307
• /
• 2015

The use of turbocharger in internal combustion engines has increased as it is a key components for improving system efficiency without increasing engine size. Because of increasing demand, many studies have evaluated rotordynamic performance so as to increase rotation speed. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a floating ring bearing. We constructed rotor model by using the finite element method and approximated bearings as being infinitely short. In the linear model, we considered fluid film force as stiffness and damping element. In nonlinear analysis, calculation of the fluid film force involved solving the time dependent Reynolds equation. We verified the developed model by comparing the results to those of previous research. The analysis results show that there are four unstable modes, which are rigid body modes combining ring and rotor motion. As the rotating speed increases, the logarithmic decrement shows that certain unstable modes goes into the stable area or the stable mode goes into the unstable area. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis frequency jump phenomenon demonstrated in several experimental studies appears. The analysis results also showed that frequency jump phenomenon occurs when the vibration mode changes and the sequence of unstable mode matches the linear analysis result. However, the natural frequency predicted using linear analysis differs from those obtained using nonlinear analysis.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.337-342
• /
• 2014

The reduction of drag torque is an important research issue in terms of improving transmission efficiency. Drag torque in a wet clutch occurs because of the viscous drag generated by the transmission fluid in a narrow gap (clearance) between the friction plate and a separate plate. The objective of this paper is to observe the effects of the friction plate area and the clearance on the drag torque using finite element simulation. The two-phase flow of air and oil fluid is considered and modeled for the simulation. The simulation analysis reveals that as the rotational speed increases, the drag torque generally increases to a critical point and then decreases sharply at a high speed regime. The clearance between the two plates plays an important role in controlling drag torque peak. An increase in the clearance causes a decrease in shear stress; thus, the drag torque also decreases according to Newton's law of viscosity. An observation of the effect of the area of contact between transmission fluid and friction plate shows that the drag torque increases with the contact area. The flow vectors inside the flow channel present clear evidence that the velocity of the fluid flows is faster with a larger friction plate, that is, in the case of a larger contact area. Therefore, the optimum size of the friction plate should be determined carefully, considering both the clutch performance and drag reduction. It is expected that the results from this study can be very useful as a database for clutch design and to predict the drag torque for the initial design with respect to various clutch parameters.

• Korean Journal of Veterinary Research
• /
• v.36 no.4
• /
• pp.941-948
• /
• 1996

The accuracy of rectal palpation and ultrasonography for predicting the presence of a functional corpus luteum in subestrous dairy cows was investigated, using the result of a radioimmunoassay for progesterone in plasma. Luteal status (high or low progesterone concentrations) was diagnosed in 820 cows, using rectal palpation and B-mode transrectal ultrasonography, and the results of rectal palpation and ultrasonography were compared in $2{\times}2$ contingency table with plasma progesterone concentrations. A $2{\times}2$ contingency table analysis allowed the calculation of sensitivity, specificity and predictive values for rectal palpation and ultrasonography. The sensitivity, specificity, predictive value of a positive test and predictive value of a negative test were 81.9%, 67.5%, 79.0% and 71.4% for rectal palpation, and 96.3%, 88.8%, 94.5% and 92.4% for ultrasonography, respectively. The percentages of observed agreement and expected agreement between rectal palpation and ultrasonography were 71.8% and 57.1%, respectively. An evaluation of agreement between rectal palpation and ultrasonography, the value of Kappa was 0.34. It was concluded that a ultrasonography was more sensitive and specific than rectal palpation in predicting the presence of a functional corpus luteum. Therefore, ultrasonographic examination is a reliable method for assessing the functional status of ovarian structures in subestrous dairy cows.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.31-36
• /
• 2006

The aim of this study was to elucidate the mechanism of anemia associated with Dangguibohyel-tang (DBT) in rats. Using cyclophosphamide-induced (30mg/kg BW) anemic rats, changes in weight gain, the levels of red blood cell (RBC), hematocrit (Hct), platelet and hemoglobin (Hgb), serum vitamin B12, ALT(GPT) levels and erythropoietin (EPO) gene expression were monitored, and compared with DBT (1,000mg/kg BW, 14d)-treated and EPO (1,000IU/kg BW, 14d, s.c.)-treated rats. Food efficiency ratio (FER) were 31.6%, in normal group, 28.1% in cyclophosphamide-induced control group, 31.7% in DBT-treated group and 25.1%, in EPO-treated group after 14 days. The levels of red blood cell (RBC), hematocrit (Hct), platelet and hemoglobin (Hgb) of DBT-treated group were significantly higher than those of control. And DBT extract administered group showed dominant effects on the recovery of Hgb level. Serum vitamin B12 and ALT(GPT) levels were significantly increased at DBT-treated groups. EPO gene expression was decreased 91,9% in control group, 79.6% in DBT-treated group and 53.9% in EPO-treated group, respectively. These results suggest that administration of DBT could prevent human patient from chemotherapy derived anemia by improving hematological value and EPO status.

• Korean Journal of Organic Agriculture
• /
• v.10 no.4
• /
• pp.47-60
• /
• 2002

'Probiotics' as a live microbial feed supplementation which beneficially affects the host animal by improving its microbial balance and it is known to as a substitue for antibiotics in livestock feed industry. Lactic acid bacteria as a Lactobacillus sp. is formed acid and decrease pH in gastro-intestine that is result in suppress harmful microorganism. Lactobacillus sp. also produces vitamin and a variety amino acids. Yeast as a saccharomyces sp. secretes digestive enzymes, decreases ammonia emission and increases feed palatability by alcohol and glutamic acid. The effects of dietary probiotics in monogastric animals that improve weight gain and feed efficiency ratio and decrease diarrhea accurence frequency in pigs. Also, probiotics increase egg production ratio and beneficial microorganisms in laying hens. In broiler, they have more gain weight and lower blood cholesterol concentrations by probiotics. However, the other study reported probiotics supplementation in animal diets has no effect on ADG, G/F or performance. Thus, future study in these area will allow for more efficient use of the probiotics, selection of more superior microorganism and development of more efficient environment-friendly probiotics like a photosynthetic bacteria.