• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.73-79
• /
• 2015

In consideration of current circumstances which management activities for safety performance on construction sites are mostly controlled by safety personnel, it is necessary to maintain qualified safety personnel those who are experienced and have adequate ability. This is a major factor in order to prevent any of work related incident in the construction site. However, the existing standard which enforces certain number of safety personnel in the construction site aligning with respective contract amount could lead to difficulties for proactive safety management. So, it is required to get improvement on the existing standard. In nominating the proper number of safety personnel, it would be more efficient to consider the level of risk for characteristic of work itself and the total number of manpower mobilized in respective construction work, rather than to follow the existing standard of manpower ratio as per the contract amount. Hence, this study aims to propose several plans which enable to improve the existing standard for assignment of safety personnel on construction sites.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.40-45
• /
• 2014

In display such as LCD, LED, and AMOLED or semiconductor related industries are required to have static ionizer in order to produce reliable goods. The most general type of ionization is called, "corona discharge" that has a slight chances to generate unequal and unstable amount of each +/- ion to the target object. Then, the ionization performance will drastically decrease and end up with quality deterioration problem. continually "A study on the improvement of the performance of pulsed AC ion bar(1)", we have studied consecutive study to improve the current issue via appling "partition wall" at air nozzle surrounding. The results were that the charge decay time and the ion balance was maintained the satisfied range that was within 5 second and ${\pm}50$ V for a 180 days period of time. In additions, the contamination status on the electrode surface was investigated for a 180 days. The little particles was deposited on the electrode surface.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1086-1093
• /
• 2005

In soft ground, consolidation settlement is mainly consider. The primary consolidation settlement which is the time when the excess pore water pressure is completely dispersed and the secondary consolidation settlement which follows. Recently as the depth of consolidation layer increases the consideration of not only the primary consolidation settlement but also of the secondary consolidation settlement becomes a very important element. But up to the present there were only a few in-depth study of the secondary consolidation settlement performed. At present there are a lot of methods available when it comes to the improvement of soft soil. In this study, Preloading Method which is the most commonly used soft soil improvement method locally was used in order to investigate the method for the reduction of secondary consolidation settlement. The objective of this study is to determine the amount of preloading required to reduce secondary consolidation settlement and to determine whether secondary consolidation settlement using standard consolidation test.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.3
• /
• pp.581-616
• /
• 2012

The purpose of this study was to examine the impact of family support and social support on the hopelessness of rural elderly people in an effort to provide some information on the improvement of elderly people's quality of life. The rural elderly people investigated didn't think that they were given lots of support from their families and society, and they didn't feel hopeless a lot, either. The hopelessness of the elderly people was under the negative influence of emotional support and instrumental support among the subfactors of family support, and that was affected in a negative way by affective support among the subfactors of social support. Therefore it could be said that the rural elderly people felt hopeless less when they were provided with more emotional support, more instrumental support and more affective support. Overall, social support had a negative impact on the hopelessness of the rural elderly people. The findings of the study suggest that in order to step up the improvement of rural elderly people's quality of life, a well-functioning model should be developed and applied in collaboration with local community, and the construction of a social support network is required as well.

• Journal of Digital Contents Society
• /
• v.5 no.2
• /
• pp.121-127
• /
• 2004

In this paper, we have analyzed the error performance of OFDM (Orthogonal Frequency Division Multiplexing 16 QAM (Quadrature Amplitude Modulation) Signal in a multipath fading environment modeled as frequency selective Rician fading. We have used a three-path model as frequency selective Rician fading used Rician parameter K. A BCH channel coding is used in order to improve the performance. From the result of this analysis, we have known the improvement of the error performance improvement and the error correcting capability by the BCH channel coding. From the results, the error performance, about $10^{-6},$ required in wireless multimedia communications can not be achieved by using only the BCH channel coding technique so that it should be adopted a new technique together.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1356-1362
• /
• 2015

The location of PV systems in distribution system has been increased as one of countermeasure for global environmental issues. As the operation efficiency of PV systems is getting decreased year by year due to the aging phenomenon and maintenance problems, the optimal algorithm for state diagnosis in PV systems is required in order to improve operation performance in PV systems. The existing output prediction algorithms considering various parameters and conditions of PV modules could have complicated calculation process and then their results may have a possibility of significant prediction error. To solve these problems, this paper proposes an optimal prediction algorithm of PV system by using least square methods of linear regression analysis. And also, this paper presents a performance evaluation algorithm in PV modules based on the proposed optimal prediction algorithm of PV system. The simulation results show that the proposed algorithm is a practical tool of the state diagnosis for performance improvement in PV systems.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.6
• /
• pp.440-444
• /
• 2009

In order to improve the effectiveness of software process improvement, more than two models can be use to compensate the weakness of each other. One of integrated models is the one in which CMMI and software six sigma. However, it is very difficult for a small software development organization to select and apply an appropriate set of six sigma tools since there are a lot of six sigma tools and statistical knowledge is required. In this paper, we suggest a six sigma tool selection process to help small organizations select six sigma tools effectively based on organization business value. Thereby, small organizations can efficiently implement CMMI by adopting an appropriate set of six sigma toolkits.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.4
• /
• pp.55-64
• /
• 2008

In this study, the management and improvement of public small-scale sewage treatment facilities was investigated. In order to improve the effective management of the operation of small-scale sewage treatment facilities, treatment methods and the problems associated with sewage treatment were carefully addressed based on the data and literature. The investigation results showed that sewer pipes in rural areas should be repaired to prevent sewage from leaking and small-scale operations should be required to have effective management for pollutant loads less than 50%. Also, new methods should be developed for low concentrations of sewage. A law associated with FRP treatment facilities should be established and local governments need to supervise these operations to avoid insufficient and faulty construction. It is recommended that new facilities are built with advanced treatment techniques when the old facility can not comply with nitrogen and phosphorous discharge limits. Moreover, the study shows that nutrient and coliform treatment efficiency improves when abandoned facilities are renovated with the installation of nitrification/denitrification and disinfection processes or another advanced process.

• Journal of the Korean housing association
• /
• v.28 no.2
• /
• pp.35-45
• /
• 2017

This study aimed to explore housing welfare service situation in City of Cheongju, Chungbuk, and assess demands for the service improvement through interviews of public and private field specialists in order to seek practical implications for enhancement of housing welfare policy and system in Cheongju. In December 2016, a series of personal and focus group interviews using semi-structured questionnaires were conducted to total 10 specialists who were currently providing and housing services. Major findings and implications are as follow. (1) City's own housing survey and database construction are in need for development and implementation of housing welfare service programs serving local needs effectively and efficiently. (2) The field specialists perceived importance of realignment of service system and to establishment of the Cheongju housing welfare center as a control tower of the services. (3) It is required to provide various opportunities to strengthen the specialists' competence through education, training and networking and to arrange persons in charge of housing programs in every community-level self-government. (4) The specialists showed their strong interests in introduction of diverse housing welfare services and programs.

• Journal of the Korean Dietetic Association
• /
• v.16 no.3
• /
• pp.208-225
• /
• 2010

Our research consisted of a qualitative study investigating the quality attributes of university foodservices through focus group interviews and a quantitative study evaluating service quality of university foodservices through a survey. Sixteen quality attributes were derived and customer satisfaction questionnaires included these 16 quality attributes with a five-point Likert scale. An Importance-Performance Analysis (IPA) model was applied in order to identify operational strategies necessary to improve service quality. The survey questionnaires were distributed to 600 university students enrolled in a university located in Kwangju and statistical analysis was performed on 555 surveys using an SPSS package. Overall customer satisfaction with the quality of university foodservices was relatively low (under 3.0) while the expectation was inclined to be high (over 4.0). The main reasons for using the university foodservice were given as inexpensive price (67.6%) and time saving (22.9%). A factor analysis of 16 quality attributes revealed two separate factors: food quality (Cronbach's alpha=0.911) and service quality (Cronbach's alpha=0.934). Variety of menu, convenient location, and sanitation of utensils and facilities were identified by an IPA model as factors needing improvement in operational strategies.