• 농촌계획
• /
• 제4권1호
• /
• pp.32-39
• /
• 1998

In Korea, rural village improvement has mainly been led by goverment investment. This approach, however, has its own limit since there are so many village to be improved while the budgetary sources are restricted, As an alternative, inducement of private investments to these area is considered in order to promote rural village improvement. The possibility of inducing private investments to the rural village improvement depends on the location of the village. The possibility may be highest in the sub-urban area since expected benefits from land development is usually high. One desirable approach to induce private investment to these area is the cooperative development system. Residents, private investors and governments plays its own role, independently and cooperatively, But benifits from the investment to improve rural village in general plain area are so low that it is difficult to induce the private investments to these area. In that case, indirect development system will be a proper strategy which maintaining government-led development method as usual, expanding the participation of private developers such as the construction companies. In general, rate of returns from investment to the rural sectors is lower than that to the other sectors, therefore financial support such as the long- term, low loan rate and a partial value-added tax exemption should be given to the investors to the rural village improvement projects.

• Journal of Acupuncture Research
• /
• 제26권4호
• /
• pp.19-27
• /
• 2009

Objectives : To investigate the improvement rate of muscle weakness caused by lumbar disc herniation, 17 patients was treated with oriental medicine. Methods : To evaluate weakness of big toe extensor muscles caused by lumbar disc herniation, we measured the active range of motion(ROM) of big toe extension and muscle grading of big toe extensor muscles. We also measured numerical rating scale(NRS), oswestry disability index(ODI) and compared them with the active ROM of big toe extension. Results : 1. Progressive weakness of big toe extensor muscles was observed in 2 patients. Weakness of big toe extensor muscles were improved in 13 patients(76%). 2. Changes in manual muscle testing(MMT) scores corresponded with improvement rate of big toe extension. 3. Numerical rating scale(NRS) and oswestry disability index(ODI) improvement rate did not correspond with improvement rate of big toe extension. Conclusions : Muscle weakness caused by lumbar disc herniation can be treated with oriental medicine and progressive muscle weakness must be observed constantly.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.140-152
• /
• 2021

During the shift from gasoline vehicles to electric ones, auto parts manufacturing companies have realized the importance of improvement in the manufacturing process that does not require any layout changes nor extra investments, while maintaining their current production rate. Due to these reasons, for the auto part manufacturing company, I-company, this study has developed the simulation model of the PUSH system to conduct a process analysis in terms of production rate, WIP level, and logistics work's utilization rate. In addition, this study compares the PUSH system with other three manufacturing systems -KANBAN, DBR, and CONWIP- to compare the performance of these production systems, while satisfying the company's target production rate. With respect to lead-time, the simulation results show that the improvement of 77.90% for the KANBAN system, 40.39% for the CONWIP system, and 69.81% for the DBR system compared to the PUSH system. In addition, with respect to WIP level, the experimental results demonstrate that the improvement of 77.91% for the KANBAN system, 40.41% for the CONWIP system, and 69.82% for the DBR system compared to the PUSH system. Since the KANBAN system has the largest impacts on the reduction of the lead-time and WIP level compared to other production systems, this study recommends the KANBAN system as the proper manufacturing system of the target company. This study also shows that the proper size of moving units is four and the priority allocation of bottleneck process methods improves the target company's WIP and lead-time. Based on the results of this study, the adoption of the KANBAN system will significantly improve the production process of the target company in terms of lead-time and WIP level.

• 한국환경보건학회지
• /
• 제33권4호
• /
• pp.255-263
• /
• 2007

Indoor air quality is the dominant contributor to total personal exposure because most people spend a majority of their time indoors. The purposes of this study were to evaluate the alternative method for improvement of indoor air quality in house after coating titanium dioxide ($TiO_2$) photocatalyst for interior part of the house using nitrogen dioxide ($NO_2$) multiple measurements. To evaluate the alternative method in indoor environment, daily indoor and outdoor $NO_2$ concentrations of an apartment and a detached house were daily measured for consecutive 21 days in winter and summer, respectively, Another daily 21 measurements were carried out after $TiO_2$ coating on wall paper of interior part in houses. All $NO_2$ concentrations were measured by passive filter badges. Indoor air quality models using mass balance are useful tool to quantify the relationship between indoor air pollution levels, ambient concentrations, and explanatory variables. Using a mass balance model and linear regression analysis, penetration factor (ventilation rate divided by sum of ventilation rate and decay rate) and source strength factor (emission rate divided by sum of ventilation rate and decay rate) were calculated. Subsequently, the decay constants were estimated. In this study. magnitude of improvement of indoor air quality could be evaluated by decay constant.

• International Journal of Quality Innovation
• /
• 제10권1호
• /
• pp.1-23
• /
• 2009

Face the process yield rate improvements of motherboard, although general enterprises finish deployment goal of each functions by overall quality managements, through quality improvement methods, industry engineering methods, plan-do-check-act (PDCA) methods and other improvement solutions, but it is only can be improved partially and unable to enhance the yield rate of product to the target. It only can takes one step ahead to enhance the process yield rate of motherboard with six sigma ($6{\sigma}$) overall DMAIC process and tactics. This research aimed to use six sigma quality improvement tactics by DMAIC systematic procedure and tactics, and find the key factors that effect to the process yield rate of surface mount technology. It also identified the keys input and process and output index to satisfy customer requirements and internal process index. The results showed that the major effective factors by fishbone and process failure modes and effects analysis (PFMEA). If the index of input and output that can be quantified, the optimum parameter can be found through design of experiment to ensure that the process is stable. If the factor of input and output that cannot be quantified, we found out the effective countermeasure by Mind_Mapping, make sure whole processes can be controlled stably, to reach the high product quality and enhance the customer satisfaction.

• Journal of Biosystems Engineering
• /
• 제31권6호
• /
• pp.482-488
• /
• 2006

Application of precision farming technology to rice cultivation could be an effective measure for rice quality improvement and environment-friendly agriculture. This study was conducted to develope a variable rate pneumatic granule applicator. Previous study reported that application uniformity of the prototype machine (C.V. = 23.3%) was not satisfactory. To improve the uniformity, increase of blow-head number from 12 to 16 was suggested. Analysis of the pneumatic conveying system showed that increase of number of blow-head was possible. Three-way variance analysis of the modified applicator showed that inserting length should be changed according to granule metering rate. The range of metering rate from 27.3 to 417.9 g/s were divided into 4 levels and 4 sets of inserting lengths were determined to ensure CV values less than 15%. The revised applicator showed satisfactory C.V. values of 9.4 to 14.6% in the metering rate. Granule conveying pattern was observed using a high speed camera and judged as the homogeneous flow pattern.

• 자원리싸이클링
• /
• 제23권2호
• /
• pp.71-80
• /
• 2014

ELV 리싸이클링비율 95% 달성을 탐색하기 위하여 리싸이클링비율의 정의, 자동차의 구성자료, 최근의 해체공정 개발 및 ASR 재활용의 현황을 조사하였다. 그리고 인천폐차사업소와 H폐차사업소의 해체현황을 실사하였다. 해체기술의 개발에 의하여 해체공정에서 94%의 물질재활용율에 근접하고 있으나 ASR의 리싸이클링은 시멘트업계의 사용금지 이후 처리 행방이 모호한 상태이다. 즉 ELV 리싸이클링비율 95% 달성에 ASR 리싸이클링이 걸림돌로 작용하고 있으므로 ASR 에너지 재활용을 적극 추진해야 한다.

• 대한산업공학회지
• /
• 제36권1호
• /
• pp.69-77
• /
• 2010

The failure rate model of External Environment Maintenance(EEM) for a system under severe environment is investigated. EEM, which is recently introduced concept, is a maintenance activity controlling external environment factors that potentially cause system failure such as cleaning equipment, controlling temperature (humidity) and removing dust inside of electronic appliances. EEM can not have any influence on the inherent failure rate of a system but reduce the severity of the external environment causing failure since it deals with only external environment factors. Therefore, we propose two failure rate models to express the improvement effect of EEM: The intensity reduction model and age reduction model. The intensity and age reduction models of EEM are developed assuming the quality of improvement effect is proportioned to an extra intensity or age respectively. The validation of proposed failure rate models is performed in order of data generation, parameter estimation and test for goodness-of-fit.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1551-1558
• /
• 2014

We propose a multi-rate sensor fusion of vision and radar using Kalman filter to solve problems of asynchronized and multi-rate sampling periods in object vehicle tracking. A model based prediction of object vehicles is performed with a decentralized multi-rate Kalman filter for each sensor (vision and radar sensors.) To obtain the improvement in the performance of position prediction, different weighting is applied to each sensor's predicted object position from the multi-rate Kalman filter. The proposed method can provide estimated position of the object vehicles at every sampling time of ECU. The Mahalanobis distance is used to make correspondence among the measured and predicted objects. Through the experimental results, we validate that the post-processed fusion data give us improved tracking performance. The proposed method obtained two times improvement in the object tracking performance compared to single sensor method (camera or radar sensor) in the view point of roots mean square error.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.378-384
• /
• 2019

식품 폐수 처리 설비중 폐수처리장 폭기조 송풍 설비 개선을 통한 수질개선 효과 및 전기사용량 변화에 따른 온실가스 발생량을 평가 하였으며, 식품 폐수처리장에서 발생되는 슬러지를 탈수, 보관, 이송하는 설비의 효율적인 개선을 통한 전기사용량 개선전과 개선후 변화에 따른 온실가스 발생량도 함께 평가하였다. 폐수처리장 설비 개선에 따른 온실가스 배출량 평가는 폐수처리 공정으로 부터의 직접배출과 전력사용으로부터의 간접배출량으로 구분 된다. 폐수처리장 수질 개선 효과는 BOD 제거율이 63.3%, COD 제거율 42.0%, SS 제거율 71.0%, T-N제거율이 39.6%로 나타났으며, 폐수처리에 의한 온실가스 직접배출량(Scope 1)과 전력소비량 변화에 대한 온실가스 간접배출량(Scope 2)을 적용하여 온실가스 배출량을 산정한 결과 설비 개선전 3,668.8tCO2eq./yr 에서 설비 개선후 3,392.8tCO2eq./yr 으로 감소 하여 총 276.0tCO2eq./yr (8.0%)의 온실가스 감축 효과가 있는 것으로 평가 되었다. 이상의 결과는 배출원의 수질 개선 효과로 인한 것이 아니라 전기사용량 감소로 인해 온실가스 배출량이 감소하였기 때문이다.