• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.935-940
• /
• 2023

Digital-twin technology is emerging as an innovative solution for all industries, including manufacturing and production lines. Therefore, this paper optimizes all the energy used in a biomass plant based on unused resources. We will then implement a digital-twin prototype for biomass plants and evaluate its performance in order to improve the efficiency of plant operations. The proposed digital-twin prototype applies a standard communication platform between the framework and the gateway and is implemented to enable real-time collaboration. and, define the message sequence between the client server and the gateway. Therefore, an interface is implemented to enable communication with the host server. In order to verify the performance of the proposed prototype, we set up a virtual environment to collect data from the server and perform a data collection evaluation. As a result, it was confirmed that the proposed framework can contribute to energy optimization and improvement of operational efficiency when applied to biomass plants.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.269-280
• /
• 2022

Recently, the necessity and importance of entrepreneurship education in universities in terms of nurturing creative talents and career paths have been emphasized. This study attempted to examine the mechanism of how the effectiveness of entrepreneurship education affects career maturity by dividing it into theoretical education and practical entrepreneurship education with problem-solving competency rather than a single dimension. This study performed an empirical analysis using Smart PLS for 153 college students. The results of the analysis are as follows. First, it was found that theoretical and practical entrepreneurship education had a significant positive (+) effect on problem-solving ability. Second, theoretical entrepreneurship education had a positive (+) effect on career maturity. but practical entrepreneurship education did not have a direct significant effect on career maturity. Third, problem-solving ability had a positive (+) effect on career maturity. Finally, the mediating effect analysis revealed that problem-solving ability had mediating effects on both entrepreneurship education and career maturity of college students. In conclusion, this study has its significance in that it presents the effectiveness and direction of entrepreneurship education both in theory and practice at a time when it is urgent to foster inspiring and creative talent in universities to meet the demands of the times. In particular, it was analyzed that entrepreneurship education conducted at universities is required to upgrade the curriculum, content, methodology, and subject design of practical entrepreneurship education, and there is an urgent need for improvement so that the effect of practical entrepreneurship education can have a significant effect on career maturity.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.4
• /
• pp.49-62
• /
• 2023

In order to create an organizational culture that prevents women's career breaks and promotes economic activities, this study aimed at developing educational content for workplace culture improvement for both male and female workers working at small and medium-sized enterprises in Jeollanam-do. The core content composition and content design specifically consider the characteristics of Jeollanam-do based on an advisory meeting of the field experts and researchers to ensure the on-site utilization of the content and the validity and consistency of the teaching content. The educational content is divided into three areas: understanding, effectiveness, and the implementation of a gender-sensitive work-life balance organizational culture. The aim of the content is for all employees to understand the meaning of work-life balance and to improve the organizational culture of their company from the perspective of individuals, families, companies, and society. In particular, the intention was to personally identify and implement measures to improve a gender-equal work-life balance, not only at work, but also with regard to domestic labor and leisure time. Furthermore, the content is presented from a gender-sensitive perspective that encompasses diversity, systems, and programs targeting women, men, single people, married people, young people, the elderly, and people with disabilities - all these groups are explained as examples. The content emphasizes that we should all actively participate in improving the organizational culture of our companies. In addition, the Women's New Work Center should seek ways to increase the motivation for the voluntary participation by companies and strengthen the expertise of instructors in work-life balance education.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.221-231
• /
• 2024

The aim of this study was to enhance the safety and care of mental health for seafarer working in passenger ship workspaces. Brightness, color values, and color distribution were investigated with issues and improvement ways identified through seafarers' interviews. Firstly, previous studies, references, current policy, regulations, and accident case studies were reviewed. Color compositions of wheelhouse and engine room of M Ship were then surveyed in the field. Color values of each space were analyzed using a colorimeter. Colormeter analysis of brightness and color measurements in the wheelhouse and engine areas indicated that ceilings, walls, and floors were generally dark, with the engine area being very dark. Regarding color, green and blue were distributed in the ceiling of the wheelhouse and engine area, while red and blue were in the walls and floors of the wheelhouse and engine area. According to interviews with seafarers currently working at engine rooms, they responded about their experience of near miss incidents due to a decrepit indoor environment, a dark working environment, slippery and bright flooring, and stairs that were not suitable for domestic users. Thus, when installing lighting in the future, the brightness of the space should be improved by distinguishing between night and day. A lighting plan considering the location of lighting, level of shadow formation and contrast, reflectance of the facility, glare, color of light, floor color plan, and material selection is needed. A facility design suitable for domestic users is also needed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.70-81
• /
• 2024

In this study, Tridimensional Hybrid Isolation System(THIS) was proposed as a vibration isolator for traffic loads, combining vertical and horizontal isolation systems. Its efficacy in improving serviceability for vertical vibration was analytically evaluated. Firstly, for the analysis, the major vibration modes of the existing apartment were identified through eigenvalue analysis for the system and pulse response analysis for the bedroom slab using commercial structural analysis software. Subsequently, a 16-story model with horizontal, vertical and rotational degrees of freedom for each slab was numerically organized to represent the achieved modes. The dynamic analysis for the measured acceleration from an adjacent ground to high-speed railway was performed by state-space equations with the stiffness and damping ratio of THIS as variables. The result indicated that as the vertical period ratio increased, the threshold period ratio where the slab response started to be suppressed varied. Specifically, when the period ratio is greater than or equal to 5, the acceleration levels of all slabs decreased to approximately 70% or less compared to the non-isolated condition. On the other hand, it was ascertained that the influence of damping ratios on the response control of THIS is inconsequential in the analysis. Finally, the improvement in vertical vibration performance of THIS was evaluated according to design guidelines for floor vibration of AIJ, SCI and AISC. It was confirmed that, after the application of THIS, the residential performance criteria were met, whereas the non-isolated structure failed to satisfy them.

• Asia-Pacific Journal of Business
• /
• v.15 no.1
• /
• pp.193-207
• /
• 2024

Purpose - With the increase of non-face-to-face activities due to the spread of COVID-19, O2O industry has grown rapidly which reduces contact points between suppliers and consumers. O2O platform is now recognized as an indispensable channel of distribution, but the voice is getting louder that it is necessary to check how it contributes to the performance of suppliers or how its fee system or contract terms affects the expansion of O2O industry as the leading companies tend to monopolize the market. Design/methodology/approach - In this study, the scope was limited to the restaurant industry in which transactions are the most active among the O2O industry and a regression analysis was done on 775 businesses that had used guarantor service from the Seoul Credit Guarantee Foundation. Findings - Analysis on the impact of O2O platform system, information, and service quality on the business performance of the sole proprietors revealed that the system quality represented by ease of use and the information quality determined by level of timely, accurate and reliable information provided to the consumers have a statistically significant effect on the improvement of business performance. In addition, the effect of business performance on the loyalty measured by the likelihood of users continuing to use the service as well as recommending it to others was moderated by the satisfaction with contract terms, not by the fee system. Research implications or Originality - Although the number of O2O platform providers has increased manyfold, the membership rate is no more than 20%, which means that the small business owners are still struggling with digital transformation. In order for the O2O industry, which is now commonplace, to form a healthy ecosystem that satisfies both suppliers and consumers, the standard contract guidelines that are acceptable to both parties must be established and the O2O providers must offer services that help suppliers to improve performance.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.39-53
• /
• 2023

Objective : The purpose was the effect of sensory integration therapy combined with an eye tracker on the sensory processing and visual perception of children with developmental disabilities. Methods : It was a single-subject study with a multiple baseline design between subjects, and the intervention applied sensory integration therapy combined with an eye tracker. Visual-motor speed and saccadic eye movements were assessed at each session of baseline and intervention periods. As pre- and post-evaluation, sensory profile, Korean-Developmental Test of Visual Perception and Trail Making Test were conducted. The results of each session evaluation and pre- and post-evaluation researched the effectiveness of the intervention through visual analysis and trend line analysis. Results : As a result of the evaluation for each session, the slope of the trend line for all children in visual-motor speed and saccadic eye movement increased sharply during the intervention compared to the baseline. As a result of the pre- and post-evaluation, the sensory processing of movement, body position, and visual changed from more than that of peers to a level similar to that of peers. In visual perception, all children's ability of Visual Closure increased. As a result of Trail Making Test conducted to confirm the improvement of children's visual tracking and visual-motor abilities, all children showed a decrease in performance time after the test compared to before. Conclusion : It was confirmed that sensory integration therapy combined with an eye tracker for developmental disabilities has effect on sensory processing and visual perception. It is expected to play an important role clinically as it can stimulate children's interest and motivation in line with recent technological improvements and the spread of smart devices.

• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.1
• /
• pp.38-52
• /
• 2024

Digital transformation industry contributes to the improvement of productivity in overall industrial production, the smart green industry for carbon neutrality and sustainable growth is growing as a future industry. The purpose of this paper is to explore the status and role of the industry in the future industry innovation ecosystem through the analysis of the growth drivers and location pattern changes of the smart green industry. The industry is on the rise in both metropolitan and non-metropolitan areas, and the growth of the industry can be seen in non-metropolitan and non-urban areas. In particular, due to the smart green industrial complex pilot project, the creation of Gwangju Jeonnam Innovation City, and the promotion of new and renewable energy policies, the emergence of core aggregation areas (HH type) in the coastal areas of Honam and Chungcheongnam-do, and the formation of isolated centers (HL type) in the Gyeongsang region, new and renewable energy production companies are being accumulated in non-metropolitan areas. Therefore, the smart green industry is expected to promote the formation of various specialized spokes in non-urban areas in the future industrial innovation ecosystem that forms a multipolar hub-spoke network structure, where policy factors are the triggers for growth.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.96-106
• /
• 2024

This study aimed to examine the effects of non-face-to-face sleep program combined with aroma necklace on quality of sleep, daytime sleepiness, depression, and stress in insomnia with college students. A nonequivalent control group pre-post test design was used. The experimental group(n=21) underwent non-face-to-face sleep program combined with aroma-necklace while the control group(n=21) received a sleep booklet. Sleep quality, daytime sleepiness, depression, and stress were measured to identify the effectiveness of the program. Data were analyzed using descriptive statistics, Fisher's exact test, χ²-test, and independent t-test with the SPSS 24.0 program. In the homogeneity test of the general characteristics and study outcome variables there were no significant differences between the two groups. Significant group differences were found in sleep quality (t=-5.87, p<.001), daytime sleepiness(t=-4.28, p<.001), and depression(t=-4.40, p<.001). No differences were found in the stress. Non-face-to-face sleep improvement program combined with an aroma-necklace was effective in improving insomnia in college students. Nurses can contribute to improving sleep and depression by applying this program to college students experienced insomnia living in various environments.