• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.211-216
• /
• 2022

In radiation therapy, accurate Quality Assurance (QA) is required to irradiate tumor tissue while minimizing damage to normal tissue. Therefore, a dosimeter that can accurately measure radiation is needed. The purpose of this study is to develop a highly efficient radiation dosimeter with high sensitivity by applying a particle in binder method that can reduce manufacturing costs and simplify processes to perovskite materials that are cheaper and simpler to manufacture. By evaluating the response characteristics to high-energy photon, the applicability of QA dosimeter to radiation therapy was evaluated. As a result of reproducibility evaluation, RSD at 6 MV energy was presented as 1.178% and 15 MV energy was presented as 1.141%. As a result of linearity evaluation according to linear regression analysis, R² values of 0.9999 were presented under each condition of 6 MV and 15 MV energy. It was found that the CsPbBr₃ dosimeter manufactured based on the results of reproducibility and linearity evaluation is highly applicable as a QA dosimeter in the field of therapeutic radiation. The CsPbBr₃ dosimeter manufactured in this study presented more than the standard performance in the evaluation of reproducibility and linearity, and it can be used as a radiotherapy QA dosimeter through improvement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.20-29
• /
• 2022

In this study, in order to improve the durability of the cement composite printed with the ME type 3D printer, PDMS, sodium silicate, and a surface hardener were employed. Post-treatment was performed on 3D-printed cement composite by coating after immersion, and the degree of improvement in durability was evaluated. As a result, in all evaluations, the durability performances of the post-processed specimens were improved compared to those of the plain specimens. Water absorption resistance, chloride penetration resistance, and carbonation resistance of the PDMS treated specimens were improved by 36.3 %, 77.1 %, and 50.4 % when compared to plain specimens. Freeze-thaw resistance of the specimens treated with sodium silicate was found to be the most excellent, with an average enhancement of 47.5% compared to plain specimens. It was found that PDMS was the most efficient post-treatment materials for 3D-printed cement composite. However, as suggested in this study, the post-treatment method by coating after immersion may not be applicable to cement composite structures printed with a 3D printer in field. Therefore, a follow-up study needs to be preformed on the durability enhancing materials suitable for 3D printing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.204-210
• /
• 2022

Cement is pointed out as the main cause of carbon dioxide emission in the construction industry. Many researchs are underway to use blast furnace slag, an industrial by-product, as a substitute for cement to reduce carbon dioxide emitted during the manufacturing the cement. When blast furnace slag is used as a substitute for cement, it has advantages such as long-term strength and chemical resistance improvement. However, blast furnace slag has a problem that makes initial strength low. This is due to the impermeable film on the surface created during the production of blast furnace slag. The created film is known to be destroyed in an alkaline environment, and based on this, previous studies have suggested a solution using various alkali activators. But, alkali activator is dangerous product since it is a strong alkaline material. And it has the disadvantage in price competitiveness. In this study, an experiment was conducted to improve the initial hydration reactivity of the blast furnace slag to secure the initial strength of the mortar substituted with the blast furnace slag and to check whether the carbonation resistance was increased. As a result of the experiment, it was confirmed that the mortar using alkaline water showed higher strength than the mortar using tap water, and there were more hydration products generated inside. In addition, it was confirmed that the mortar using alkaline water as a compounding water had high carbonation resistance.

• The Korea Journal of Herbology
• /
• v.33 no.2
• /
• pp.59-67
• /
• 2018

Objective : Plantago asiatica L. has been used for many years in Korea, China, and Japan for the treatment of many diseases such as anti-inflammatory, anti-asthma and diuretic. But the anti-obesity effect of Plantaginis asiaticae Folium has not been studied yet. Thus, this study aimed to demonstrate the anti-obesity efficacy of Plantaginis asiaticae Folium water extract (PAF) in high fat diet-induced obesity animal model. Method : Male, five-weeks old C57BL/6 mice were divided into 5 groups; ND (normal diet + 0.9% saline), HFD (high-fat diet + 0.9% saline), PC (high-fat diet + Garcinia cambogia 500 mg/kg), PAF 100, 300 (high-fat diet + PAF 100, 300 mg/kg. Treatments were performed daily for 6 weeks per os. We evaluated the changes of body weight, white adipose tissues weight, hepatic and fecal lipids level, pancreatic lipase activity and lipid profiles in plasma. Result : Body weights, adipose tissue weights and FER were significantly lower in mice fed the high-fat diet with PAF treatment than in mice fed the high-fat diet alone. In plasma, TG, TC, LDL-C, ATS and ALT levels significantly decreased in PAF groups compared with HFD group. Also, hepatic triglyceride (TG) levels decreased and fecal TG increased in PAF groups compared to HFD group. In addition, the activity of pancreatic lipase was decreased in the PAF groups compared to that of HFD group. Conclusion: These results suggest PAF extract is effective in preventing and improvement obesity, so it might be a potential and safe material for anti-obesity agent of weight control or functional supplements.

• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.47-55
• /
• 2022

Tungsten carbide is widely used in carbide tools. However, its production process generates a significant number of end-of-life products and by-products. Therefore, it is necessary to develop efficient recycling methods and investigate the remanufacturing of tungsten carbide using recycled materials. Herein, we have recovered 99.9% of the tungsten in cemented carbide hard scrap as tungsten oxide via an alkali leaching process. Subsequently, using the recovered tungsten oxide as a starting material, tungsten carbide has been produced by employing a self-propagating high-temperature synthesis (SHS) method. SHS is advantageous as it reduces the reaction time and is energy-efficient. Tungsten carbide with a carbon content of 6.18 wt % and a particle size of 116 nm has been successfully synthesized by optimizing the SHS process parameters, pulverization, and mixing. In this study, a series of processes for the high-efficiency recycling and quality improvement of tungsten-based materials have been developed.

• Journal of Korean Elementary Science Education
• /
• v.40 no.4
• /
• pp.443-459
• /
• 2021

In this study, a TPACK-based STEAM program was developed and applied under the theme of excretory organs in the 'Structure and Function of Our Body' of the elementary science curriculum. The program was produced and conducted through curriculum analysis and learning goal detailing, learning environment analysis, teaching·learning method and technology selection, TPACK elements arrangement and teaching·learning material development, application and effectiveness verification. Teacher's TPACK considered in STEAM program design process is content knowledge (appearance and work of excretory organs), pedagogical knowledge (STEAM, problem-based learning, research learning, discussion learning, cooperative learning, scientific writing) and technology knowledge (3D printer and smart device application technology). The program consisted of a total of 8 hours of project learning activities and was applied to 29 students in the fifth grade as an experimental group. A program of the same theme developed mainly from textbooks was applied to 27 students in the fifth grade of a comparison group. As a result of the application of the program, the experimental group showed significant improvement in creative problem-solving ability and scientific attitude compared to the comparison group, and the class satisfaction with the STEAM program was also high. However, there was no significant difference in academic achievement ability.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2022

The purpose of this study is to evaluate the adhesion properties of polymer cement composites for crack repair of an RC structure. Polymer cement composites are manufactured from cement, three types of polymers and silica fume, and the mixture is designed by adjusting the water cement ratio and AE reducing agent so that the viscosity target of the polymer cement composites is 700mPa·s or less. According to the test results, the Type-A adhesion in tension of the polymer cement composite exceeded the adhesion standard of 1.0MPa of the polymer finishing material, and furthermore, depending on the type of polymer, the adhesion in tension was highest for SAE, followed in descending order by EVA, and SBR. In addition, the adhesion in tension of Type-B is up to 1/4.5 lower than that of Type-A, but the incorporation of silica fume shows a significant improvement in terms of adhesion in tension. Based on this study, the basic mixing design of the polymer cement composites required for viscosity and adhesive performance required for crack repair of the RC structure was completed. It could be proposed as an optimal mixing design under conditions for intermixing polymer type EVA, SAE, and P/C 80%-100%.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.249-254
• /
• 2022

Silkworms, which have for long been used as an insect resource for industrialization, have recently attracted attention as potential bio-factories for the production of novel biomaterials. In this regard, material production is typically achieved based on transformation technology, mediated via microinjection, in which a target gene is inserted into eggs containing an embryo. However, an essential step in the microinjection procedure is egg fixation, which can be a time-consuming and laborious task. Therefore, in this study, using the 3DCADian program, we adopted a 3D printing approach to model egg liners and glue drawers, which can contribute to facilitating egg alignment and fixation, thereby enhancing transformation efficiency by reducing time consumption and fatigue. After rendering using Fusion 360, the two supplementary tools were produced by printing with nylon resin (PA12) and Sinterit Lisa Pro. Subsequent analysis of the time required to fix eggs on glass slides using the two manufactured tools, revealed that the processing time was reduced by approximately 18.6% when the two tools were used compared with when these tools were not used. These innovations not only reduced fatigue but also contributed to more effective use of the microscope and manipulator for microinjection. Consequently, we believe that with additional research and refinement, the egg liner and glue drawer developed in this study could be used to enhance silkworm transformation efficiency and study similar transformation systems in other industrial insects.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.133-138
• /
• 2023

Due to social phenomena such as rapid aging in Korea, nuclear familyization, single marriage, and low birth rate, the number of Companion animals and the number of households with Companion animals are increasing due to the increase in single-person households. In fact, one out of every four households has a pet, and the scale of the industry is expected to reach 6 trillion won in 2027. In particular, in a situation where the Companion animal cosmetics market is in the spotlight amid the diversification of the pet industry, there is a great lack of research on related research and industry development methods. Accordingly, this study attempted to search and analyze academic data, patented technologies, and the latest data related to pet cosmetics and provide them as basic data for the Companion animal cosmetics industry, and the results are as follows. Academic data included verification of the effectiveness of natural materials to improve the skin condition of dogs, analysis of the pet cosmetics industry, and research on ICT-converged pet cosmetics, and the industry was mainly cleaning cosmetics, with pet shampoo launches in Amorepacific, LG Household & Healthcare, and Aekyung. In the patented technology for pets, a patent has been registered for natural product material composition and formulation ratio for skin moisturizing, skin improvement, thinning, and inflammation symptom relief. As a result of this award, it was confirmed that research and development are still insufficient compared to the consumption demand of the pet cosmetics market, and it is believed that industry analysis and development research in related fields should be actively carried out.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.1
• /
• pp.75-85
• /
• 2023

This study was conducted to assess the effect of heptapeptide, composed of seven amino acids, on the activation of human hair cells isolated from human hair follicles. We have confirmed that the heptapeptide could bind to Lgr5 from the results of surface plasmon resonance (SPR) analysis. Heptapeptide enhanced the proliferation of human hair follicle dermal papilla cells (HHFDPCs) in a dose dependent manner. It induced the protein level of nuclear β-catenin, and the expressions of β-catenin downstream target genes, including LEF1, Cyc-D1 and c-Myc, in HHFDPCs. Heptapeptide significantly induced the phosphorylation of Akt and ERK, and the mRNA expressions of growth factors, including hepatocyte growth factor (HGF), keratinocyte growth factor (KGF) and vascular endothelial growth factor (VEGF), in HHFDPCs. In addition, heptapeptide significantly increased mRNA expression levels of differentiation-related transcription factors of human hair germinal matrix cells (HHGMCs) and differentiation markers of human hair outer root sheath cells (HHORSCs). Additionally, we investigated the effect of heptapeptide on human hair follicle stem cells (HHFSCs) differentiation and found that the heptapeptide reduced the mRNA and protein levels of stem cell markers, while it increased those levels of differentiation markers. These results have indicated that the heptapeptide promotes proliferation or differentiation of various types of hair follicle constituent cells through the induction of Wnt/β-catenin signaling. From the results, we have suggested that the heptapeptide in this study could be applied as a new functional material for the improvement of hair growth and alopecia.