• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.227-234
• /
• 2015

This paper presents the application of bee colony optimization (BCO) to obtain the optimal switching angles for single phase PWM AC choppers. The optimal switching angles are found in the region of 0-${\pi}$ based on the asymmetrical PWM technique. This PWM process results in improvements of the total harmonic distortion of the output voltage and in the input power factor. Simulation and experimental results are compared with the conventional PWM to verify the performance of the proposed PWM process.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.951-958
• /
• 2013

This paper proposes the controller design for a stability improvement of an on-board battery charger. The system is comprised of a power factor correction (PFC) circuit and phase shift full-bridge DC-DC converter. The PFC circuit performs the control of the DC-link voltage and the input power factor. The DC-DC converter regulates the voltage and the current in the battery using the DC-link voltage. This paper proposes the design method of PI controller for the PFC circuit using a small signal model. The analysis and design of a type-three controller for the DC-DC converter is also presented. A simulation and experiment has been performed on the on-board battery charger and their results are presented to verify the validity of the proposed system.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.8-13
• /
• 2006

In this paper, we try to find success factor to satisfy Female Customer of a Family Restaurant We survey Female Customers Requirement and make a Questionnaire based on Female Customer by interview and internet Homepage. We find Potential customer satisfying factor by using Kano Analysis and Timko's CS coefficient and Potential Customer Satisfactionv improvement Index(PCSI) which is suggested by Leem represents how much a service feature can increase the degree of customer satisfaction when the service feature is fully fulfilled. We also discuss how to use this result, we hope our result to apply customer satisfying many fields not only Family Restaurant.

• Journal of The Korean Radiological Technologist Association
• /
• v.25 no.1
• /
• pp.24-24
• /
• 1999

In order to establish reasonable concept and background on repititive films, we analyzed factors due to wasted films grouping into three major factors as 1) artificial factor from exposure and positioning. 2) mechanical factor as mechanic error and jammin

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.343-350
• /
• 2019

Objectives: This study aims to identify whether ventilation conditions and their effectiveness can be significantly improved in an experimental chamber by increasing the mixing factor (K-Factor). Methods: In a chamber with a volume of $1m^3$, air velocity was measured at six different points with four roof fans in the upper part of the chamber being operated in order. The impact of the ventilation conditions was analyzed when the flow rates were increasing and the first inlet of the chamber was either open or closed. Smoke patterns were also observed at four corner points where ventilation was limited. Kruskal Wallis and Mann-Whitney tests were performed to compare air velocities measured in the chamber. Results: The air velocities measured at only the third point increased significantly from $0.03{\pm}0.03m/s$ (door open) and $0.05{\pm}0.06m/s$ (door closed) with two fans, $0.08{\pm}0.08m/s$ with three fans, and $0.09{\pm}0.09m/s$ with four fans operating (p<0.05). However, air velocities at the four corner points did not significantly increase. Smoke patters also showed that the open inlet of the chamber had no effect on improvement of ventilation conditions and effectiveness. Conclusions: In this study, the air velocities at six points in the chamber did not significantly increase despite the increase in the mixing factor and flow rates of ventilation in the controlled environment. Therefore, the inflow of outdoor air throughout an open inlet and installation of a forced ventilation system can potentially increase the indoor air velocity and improve ventilation condition without an increase in the mixing factor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.114-122
• /
• 2011

In this paper, we have identified the system instability factors in a bistatic radar system using pulse chasing and considered their effects on the bistatic receiver's MTI(Moving Target Indication) improvement performance. The pulse chasing is a method to efficiently scan a restricted search area within the limited transmitter power and time in a bistatic radar and to track a series of transmitted pulses using the receiver beam which has ideally matched to the pulse propagation rate. In this paper, we have discussed the interrelationship between the pulse chasing and time and frequency/phase synchronization and described the effects of the identified system instability factors on two kinds of MTI filter configuration, single delay-line and double delay-line, in the bistatic radar. And also, we have confirmed that the overall system improvement is restricted by a lower improvement factor among identified them, and discussed the allowable tolerance of the time and frequency/phase synchronization in the bistatic system.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2001.12a
• /
• pp.438-450
• /
• 2001

This study is to classify the typology of e-business model based on the practical strategic model for successful e-business implementation. For that purpose, we review the conceptual framework of e-business and collected the data from 127 companies implementing e-business. The study is conducted in three phases as follows. First, six factors consisted of 22 items are derived through factor analysis. Second, Cluster analysis is employed to group the firms into different strategic patterns. A five-cluster solution is found to maximize the distances between cluster means across the six factor patterns. The models are named as 'ascendancy and convergence', 'expansion and moderate price', 'expansion and improvement of quality', 'ascendancy and process', and 'improvement of quality' respectively. Third, ANOVA is used to examine the impact on the performance differences attributable to the models. The results of the study are; (1) the 'ascendancy and process', 'expansion and improvement of quality' and 'expansion and moderate price' models were associated with significantly higher performance levels than the 'improvement of quality' model, and (2) the hybrid strategies are needed to implement e-business successfully based on the 'ascendancy and process' model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.59-70
• /
• 2010

This paper reorganized five service qualities dimensions of ski-resorts, then derived the improvement priority order of the service quality through a satisfaction measure considering the importance. There're more competitive situations to guarantee customers using the skies and snowboards is a major sports in winter season. In these competitive environments, this paper's going to propose a predominant-competitive strategies for improving the service quality of ski-resorts. This study measured the satisfaction considering the importance of service quality target on customers has an experience ski resort service quality to improve ski resort service quality. This study using Performance Model decide a priority order about a particular item improvement, then is going to present a guideline that can improve the service quality more exactly. As a result of the study the factors that is important to the customer were prime physical factor, access, assistance physical factor, staff service and assistant service, an improvement priority order were accommodation and eating-drinking facilities, waiting time of a slope and lift/gondola, entertainment/shopping facilities in the resorts, equipment rental and lift fare.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.2
• /
• pp.80-90
• /
• 1993

This study was a case about improvement and system of management in park of Japan. Technique of Maintenance make a rapid progress. In the other hand, management was fall behind. Because of, its was not accept change of consciousness and variety of social factor. That is, not make clearly system of administration(organization, budget, etc.) for qualitative improvement of park. Besides, not make accumulation data of management and technique of maintenance. In future, need many study about system of management.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.433-436
• /
• 2007

We analyzed the sloped ground safety factor, which is not presented in the design specification, using a computational analysis program L-Pile Plus 13.8. To achieve this we chose a required parameter set and a level ground safety factor presented in the design specification, and then determined its values comparing with the change of the safety factor according to the parameter. Using these parameters, we estimated the sloped ground safety factor for the slope of 35 degrees considering the improvement value of the slope presented in the design specification. As a result of this analysis, we obtained the smaller safety factor by about 0.7 times than the case of the level ground and verified that a number of concrete poles fail to assure 1 degree of the safety factor. We, therefore, concluded that an adjustment of the embedment depth is required in the case of the sloped ground.