• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.942-954
• /
• 2007

The purpose of this research is to examine the level of SCM activity, marketing capability, and firm performance for apparel firms, and to investigate the effect of SCM activities and marketing capabilities for firm performance improvement. This study surveyed domestic apparel manufacturing brands that distribute products nationwide. The data was collected through questionnaires sent to managers or executives in large and middle manufacturing corporations among Korea's listed and registered corporations. The data collection has been carried out from November 10 until December 11, 2006. The questionnaires were transmitted by individual visit, fax, and mail. A total of 98 completed responses were returned, three incomplete responses were discarded. The results were as follows: First, SCM activity was classified into 3 dimensions: structural, logistical, and technological factor. Three dimensions of marketing capability were identified with differentiation, cost-leadership, and operational factor. Firm performance was classified into three dimensions: financial, productivity, and customer satisfaction factor. Second, result of analyzing effects of SCM activities for firm performance improvement, it was found that the improvement of technological activities affected acquirement of financial, productivity, and customer satisfaction performs. Structural activities affected factor of productivity performs. Third, result of analyzing effects of marketing capabilities for firm performance improvement, improvement of differentiation capabilities affected acquirement of financial, customer satisfaction performs. And the improvement of operational capability affected acquirement of financial performs and improvement of cost-leadership capability affected factor of productivity performs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.171-182
• /
• 2015

The general wavelet transform has profitable property in non-stationary signal analysis specially. The tunable Q-factor wavelet transform is a fully-discrete wavelet transform for which the Q-factor Q and the asymptotic redundancy r, of the transform are easily and independently specified. In particular, the specified parameters Q and r can be real-valued. Therefore, by tuning Q, the oscillatory behavior of the wavelet can be chosen to match the oscillatory behavior of the signal of interest, so as to enhance the sparsity of a sparse signal representation. The TQWT is well suited to fast algorithms for sparsity-based inverse problems because it is a Parseval frame, easily invertible, and can be efficiently implemented. The transform is based on a real valued scaling factor and is implemented using a perfect reconstruction over-sampled filter bank with real-valued sampling factors. The transform is parameterized by its Q-factor and its over-sampling rate, with modest over-sampling rates being sufficient for the analysis/synthesis functions to be well localized. This paper describes filter design of 2D discrete-time wavelet transform for which the Q-factor is easily specified. With the advantage of this transform, perfect reconstruction filter design and implementation for performance improvement are focused in this paper. Hence, the 2D transform can be tuned according to the oscillatory behavior of the image signal to which it is applied. Therefore, application for performance improvement in multimedia communication field was evaluated.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.2
• /
• pp.259-279
• /
• 2000

This study is a descriptive analytic research measuring nursing service quality, using SERVQUAL model, to make fundamental data and strategies for nursing service improvement. Data were collected by self-reported questionnaire from 202 patients and 142 nurses, from June 7 to 14, 1999. The reliability of instrument were adequate(Cronbach ${\alpha}=.94$). SAS program was utilized for statistical analysis of collected data. The results were as follows; 1. There was a gab between patient's expectation and perception on nursing service(Gap B). Gap D was indicated an affecting factor to decide nursing service quality. Gap C was indicated an indirect affecting factor of nursing service quality. Because it was not statistically significant in total item analysis, but in individual item analysis, 7 items were appeared statistically significant. Gap A was not a gap occurrence factor of nursing service quality. 2. Focuses of nursing service quality improvement strategies were; (1) to direct qualitative improvement of nursing service in order to correspondence patient's nursing service expectation. (2) to make nurse's service activity modified because nurse's practice were not reached patient's expectation level. (3) to need internal, external factor analysis affecting nurse's service activity. 3. Nursing service quality was decided by rather environmental inappropriateness provided nursing service than itself. Therefore, to make nursing service quality improvement, it is required to improve nursing service environment. For this, followings are required; (1) to strengthen nurse's education on lower part of nursing service satisfaction and QI activities. (2) to balance demand and supply of nursing personnel. 3) to fix computerized system for reducing other duties weight except nursing care through analysis of nursing activity. (4) to construct rational cooperating system among related departments. 4. The important parts for nursing service quality improvement were indicated as follows: (1) Gap B: 'prompt reaction', 'examination symptom before patient's complaint', 'hearted nursing service reducing patient's dissatisfaction', 'explanation goals of nursing activities', 'having special Knowledge enough', 'maintenance position comfortably', 'management of patient's physical hygiene'. (2) Gap C: 'maintenance physical safety', 'explanation about hospital rules and facilities'. (3) Gap D: 'tender, safe injection and wound care'. Because above items are mostly improved through nurse's attitude change and quality improvement, it is required to establish nursing standardization and to strengthen nurse's clinical education. As the based on above results, followings are suggested; 1. SERVQUAL model is very useful to make strategies for nursing service quality improvement because it indicates multiple factors affecting hap occurrence. 2. At individual items analysis of Gap C, statistically significant 7 items appeared higher nurse's perception level than patient's perception level on nursing service were trouble perception level on nursing service quality improvement. So. it need further research to analysis about these difference occurring factors. 3. At analysis of Gap D, it is indicated that in nursing service performance process, multiple factors lowing nursing service quality were intruded. So it needs further research to analysis what these factors are and how each factors affect on nursing performance process. 4. nursing service quality measurement is changeable according to sample select time or sampled subject's characteristics. So to develope strategy for nursing service quality improvement is based on the results of periodical analysis.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.238-245
• /
• 2003

In this paper, a single Phase voltage source voltage-controlled active power filter(APF) for power quality improvement was proposed. The proposed APF has the performance of harmonic suppression and unity power factor correction. The performance of harmonic suppression can be obtained by controlling the waveshape of the APF output voltage to be sine wave. And, unity power factor is controlled by the reactive power control loop of the APF output. Simulation and experimental results using diode rectifier showed that the voltage-controlled APF, unlike the current-controlled APF, can reduce the voltage harmonics as well as current harmonics. Also the results showed that the input dover factor and power quality were greatly improved.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.193-204
• /
• 2003

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate but remains the pattern of hazard rate unchanged. And the system undergoes only minimal repairs at failures between PM's. The expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.64-68
• /
• 1994

This paper presents the structures, characteristics and shield factor of armoured communication cables used against power induction problems. The decision methods of grounding resistance and calculation formulas of shield factor are considered and improvement methods of domestic installation practice are presented.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.18 no.1
• /
• pp.58-65
• /
• 2007

Objectives : Motivational factor is a unique contributor to the typically poor academic performance of children with ADHD. However, few study has directly intervened learning motivation in children with ADHD. We conducted this study to explore the direct effects of the learning motivation improvement program applied to children with ADHD. Method The program was designed in order to increase an interest-inducing educational intervention, an academic skills integration, a basic learning activity (reading, writing, and math), and children's self-esteem. We conducted the program twice a week (total 10 sessions) and assessed learning motivation, teaming attitude, self-esteem, academic performance, and problem behaviors of participating children. Results : After the program, teachers reported improvement in teaming motivation. In addition, parents notified sisnificant reduction of problem behaviors. Children reported improvement in a few domains of teaming motivation and learning attitude. Conclusion : While loaming motivation is regarded as an important factor in education, there have been few studies considering this issue in both educational and psychiatric fields. The teaming motivation improvement would be needed in both field in order to reduce the deficits in academic performance in children with ADHD.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.375-378
• /
• 2003

This paper presents a study on the power factor improvement of the Wind turbine Generation System(WTGS) at Haeng-won wind farm in Jeju Island. Vestas WTGS named V47 as a model system is selected in this paper, and has 660 kW Power ratings. In this system, power factor correction is controlled by the conventional method with power condenor bank. So, model system at Haeng-won wind farm has very low power factor in the area of low wind speed, which is from 4 m/s to 6 m/s. This is caused by the power factor correction using power condenser bank To improve the power factor in the area of low wind speed, we used the static var compensator(SVC) using current controlled PWM power converter by IGBT switching device. finally, to verify the profosed method, the results of computer simulation using Psim program are presented to support the discussion.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.293-301
• /
• 2013

The purpose of this study is to introduce the limit of previously used six sigma quality process evaluation metrics, $Z_{st}$ and $P_{pk}$, and a solution to overcome this drawback by using a metric based on performance evaluation of Z-factor quality innovation. Case analysis on projects from national six sigma contest from 2011 to 2012 is performed and literature review on new drug development HTS (High Throughput Screening) is used to propose innovative performance evaluation metrics. This research shows that experimental study on six sigma evaluation metric, $Z_{st}$ and $P_{pk}$, have no significance difference between industrial type (Manufacturing, Semi-Public Institute, Public Institute) and CTQ type (Product Technology Type CTQ, Process Technology Type CTQ). Following discovery characterize this quality improvement as fixed target type project. As newly developed moving target type of quality innovation performance metric Z-Factor is used for evaluating experimental study, hypothetical analysis suggests that $Z_{st}$ and $P_{pk}$ share different relationship or even show reciprocal relationship. Constraints of the study are relatively small sample size of only 37 projects from past 2 years and conflict on having interview and communication with six sigma quality practitioner for qualitative experimental study. Both moving target type six sigma innovation project and fixed target type improvement project or quality circle enables efficient ways for a better understanding and quality practitioner use by applying quality innovation performance metric. Downside of fixed target type quality performance evaluation metric, $Z_{st}$ and $P_{pk}$, is presented through experimental study. In contrast, advantage of this study is that high throughput requiring product technology, process technology and quantum leap typed innovation effect is evaluated based on precision and accuracy and Z-Factor that enables relative comparison between enterprises is proposed and implemented.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.2
• /
• pp.91-100
• /
• 2018

This study aims to identify more reasonable and efficient development plans to engage local university students in landscape improvement projects in rural areas. To survey university students, residents, administrators and experts involved in such projects on important considerations in this regard, SWOT analysis was employed to identify important factors, followed by analytic hierarchy process (AHP) to evaluate their relative importance, identify problems and suggest implications for improvement. The results are summarized as follows: the relative importance of the SWOT group was in the order of opportunity, strength, threat, and weakness. For each SWOT factor, the relative importance of strengths was in the order of students' aspiration and passion, availability of creative ideas and designs, and improved attachment to their community. The relative importance of weaknesses was in the order of the lack of spontaneous participation of residents, short preparation periods and insufficient budgets, and the lack of experience in similar projects. The relative importance of opportunities was in the order of young students' activity itself being a boost factor to the community, students' endeavors arising a consensus among residents, and students feeling a sense of duty as representatives of their school. The relative importance of threats was in the order of projects being one-shot, temporary events, immaturity, and differences in preferences between older and younger generations. To draw an overall ranking of the sub-factors evaluated, the overall relative importance of the decision-making factors was evaluated. Among the sub-factors for each SWOT group, young students' activity itself being a boost factor to the community as an opportunity factor was shown to be the most important, while the lack of experience in similar projects was shown to be the least important as administrators and experts made appropriate interventions in each stage.