• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.41-43
• /
• 2002

The contracted electric power and the demand factor of customers are used to predict the peak load in distribution transformers. The conventional demand factor was determined more than ten years ago. The contracted electric power and power demand have been increased. Therefore, we need to prepare the novel demand factor that appropriates at present. In this paper, we modify the demand factor to improve the peak load prediction of distribution transformers. To modify the demand factor, we utilize the 169 data acquisition devices for sample distribution transformers in winter, spring summer. And, the peak load currents were measured by the case studies using the actual load data, through which we verified that the proposed demand factors were correct than the conventional factors. A newly demand factor will be used to predict the peak load of distribution transformers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.77-80
• /
• 2003

Switching Mode Power Supply(SMPS) is widely used in many industrial fields. Power factor improvement and harmonic reduction technique are very important in SMPS. In this paper, we propose the circuit applied Flying Capacitor Snubber for improving power factor of boost converter on fast switching state. Snubber circuit consists of a inductor, two diodes and a capacitor. The losses of switching are reduced by inserting a snubber inductor in the series path of the boost switch and the rectifier diode to control the di/dt rate of the rectifier during it's turn-off. Prior to actual experiment, the circuit analysis Is implemented by PSPICE simulation.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.40-45
• /
• 2010

In order to establish the electric distribution system economically and operate efficiently, it becomes important to calculate energy losses of the system more accurately. This importance is not only related for the engineering of utilities' power network but also for the consumers' electric system. The Distribution Loss Factor (DLF) is the fundamental element of calculating the energy losses occurred through the electric system including the electric lines and equipments. Up to now, the DLF is calculated by empirical formulas using the correlation between the DLF itself and Load Factor. However, these methods have some limitations to reflect the various characteristics of the system and the load. In this regard, the novel method proposed here is developed to yield more accurate result of DLF which actively interacting with the characteristics and load patterns of the system. The improvement of accuracy is very significant according to the results of verification presented at the end of this paper.

• 교육시설 논문지
• /
• 제24권3호
• /
• pp.15-21
• /
• 2017

The purpose of this study was to develop satisfaction scale of school toilet that was completed repair work and examine its validity. In order to develop general and scientific satisfaction scale, the data was collected and analyzed targeting 3,694 participants from seventy schools which were elementary, middle, and high schools participating in improvement projects of school toilet in 2015 and 2016. Satisfaction scale of seventeen items was developed by using exploratory factor analysis and confirmatory factor analysis. Total Cronbach's ${\alpha}$ of seventeen items resulted in .950. Factor loading indicated over 0.6. Factor explanation of each item showed that was relatively high. This scale can be used to research unit school satisfaction and utilized for further research. The implication of this study was a reliable and valid instrument for measuring the satisfaction of school toilet.

• 한국음향학회지
• /
• 제18권4호
• /
• pp.47-52
• /
• 1999

본 논문에서는 특징 파라미터의 분산과 인식성능에 대한 기여도를 고려하여 각 특징 파라미터를 가중시키는 방법을 제안하였다. 각 특징 파라미터의 인식률에 비례하게 전체 기여도를 설정하고, 각 특징 파라미터의 분산에 따라 가중요인을 설정하였다. 전체 기여도와 분산에 따른 가중요인을 사용하여 각 특징 파라미터의 상태별 가중치를 설정하였다. 제안한 방법의 유효성을 살펴보기 위해 유사음소 단위의 HMM 음성인식시스템을 사용하여 인식실험을 하였다. 인식실험에서 제안한 방법으로 가중치를 설정하였을 경우에 인식률이 7.7% 향상됨을 볼 수 있었다.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.390-395
• /
• 1987

There is a variety not only of research topics but also of research techniques in electric power problems. It is well known that a significant increase in the rate of convergence can be obtained for the Gauss-Seidel method using the bus admittance matrix by applying acceleration factors determined empirically. The acceleration factor is calculated theoretically by using the bus voltage sensitivity (buses voltage interact each other) in this paper. It is observed that the proposed method using calculated acceleration factor gives better results than those of the method using calculated acceleration factor gives better results than those of the method using empirical one.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.169-173
• /
• 2005

In this paper, a comparative study of modified phase-angle, extinction-angle, and pulse width modulation control techniques for the purpose of power factor improvement of single-phase AC-AC voltage regulators have been illustrated as applied to a single-phase ac voltage converter by an example of the widely used single-phase induction motor as a dynamic load. Observations on power factor, displacement factor and total harmonic distortion factor are described and discussed on the basis of the simulated and measured results of this work.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.142-149
• /
• 2000

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed in the scale 1:1. The model experiments were executed at a pressure smaller than in the real gas turbine. The combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure, and NOx emission were measured at partial and full load for both model and on-site testing. The comparison of these items of information, received on similar modes in the stand and field tests, has allowed the development of a method of calculation and the improvement of gas turbine combustors.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.

• 한국조명전기설비학회지:조명전기설비
• /
• 제4권1호
• /
• pp.54-62
• /
• 1990

본 연구는 우리나라 전력다소비 건물의 전기설비용량, 전력사용실태를 조사하여 통계적 처리를 함으로써 합리적인 수요율과 부등율 기준을 설정하였다. 설정된 수요율과 부등율 기준을 적용하면 설비투자비 감소, 전력손실 감소, 전기요금 절약 및 설비 이용율 개선에 크게 기여할 수 있다. 그러므로 설정된 수요율과 부등율 기준은 이행 관제규정을 개정하기 위하여 활용되어야 할 것이다.