• 대한치과기공학회지
• /
• 제16권1호
• /
• pp.12-42
• /
• 1994

The study objected to the 36persons out of 55 persons who have registered under the association of the professor of department of Dental Laboratory Technology to grasp contents of May, 1992, and objected to the 74persons out of 100persons who have registered under the association of an a lumni of Department of dental Laboratory Technology, Jisan Junior college to grasp contents about improvement of dental laboratory technology, Jisan Junior College to grasp contents about improvement of the national practical examination in the dental technician of the present day of May, 1994 and its results which we have acquired by this study were as follows : There are lots of opinions who have required the necessities to enforce for a national practical examination in the dental technician. A sense of satisfaction forward the system of a national practical examination in the dental technician appeared as unsatisfaction and it's unsatisfaction decreased from evaluation me operation method, the makes of questions, selection of a markers, distribution of marks of a practical examination. The operation method of a practical examination have appeared the opinions which they wished the present system. A date of operation a practical examination have appeared the opinion of which they preferred late in February. The distribution of marks of a practical examination have appeared the opinions which they wished the present system. The problem of the makes of questions of carving test which derived by an out flow of cast appeared which 52.7 percent(58 persons), lack of objectivity and lack of a standard evaluation appeared which 40 percent(44 persons), and lastly appeared. 5.5 percent(6 persons) with partiality of a questions. The problem of the makes of question of Q-test which derived by lack of a standard evaluation appeared which 44.5 percent(49 persons), lack of objectivity appeared which 39.1 percent(43 persons).

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권4호
• /
• pp.7-15
• /
• 2017

Purpose: The Korean government has implemented a Barrier Free Certification System since 2008 to create a secure and convenient environment for the socially disadvantaged. The drastic increase in the number of BF-certification facilities is expected due to the revision of the system and increasing the number of certification institutions. An analysis of individual evaluation items needs to be made for the BF-Certification with public confidence. Method: Korean standard, International Standard(ISO/FDIS 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(${\ddot{O}}NORM$ B 1600, 2017) and Swiss Standard(Norm SIA 500 / SN 521 500, 2009) were investigated and analyzed. A comprehensive improvement plan is proposed by comparing details of the aforementioned standards and the evaluation items of BF-Certification. Results: Many problems arise in applying existing Barrier-free standards due to changes in population structure, environmental change and the use of powered wheelchairs. International standards are being improved to solve these problems. The korean standards also require improving of the Barrier Free Law and Certification System, which reflect these trends. In korean cases, standards such as the size of the doors (width and height), the Unobstructed Manoeuvring Space and Clear Space at the Latch side of the Door are required to improve standards in accordance with international standards. In addition, the expression of laws and evaluation items of BF-Certification should be clearly defined. And the application of visual contrast standards for the enhancement of perceptions presented in international standards should be considered. Implication: Barrier Free related legal standards and evaluation items of BF-Certification that are used in Korea are required to be revised in consideration of social and environmental changes. Comprehensive improvements should be made through detailed review.

• 농업과학연구
• /
• 제49권3호
• /
• pp.431-440
• /
• 2022

Hanwoo cattle are a unique and historical breed in Korea that have been genetically improved and maintained by the national evaluation and selection system. The aim of this study was to provide information that can help improve the accuracy of the estimated breeding values in Hanwoo cattle by showing the difference between the imputation reference chip platforms of genomic data and the scaling factor of the genetic relationship matrix (GRM). In this study, nine sets of data were compared that consisted of 3 reference platforms each with 3 different scaling factors (-0.5, 0 and 0.5). The evaluation was performed using MTG2.0 with nine different GRMs for the same number of genotyped animals, pedigree, and phenotype data. A five multi-trait model was used for the evaluation in this study which is the same model used in the national evaluation system. Our results show that the Hanwoo custom v1 platform is the best option for all traits, providing a mean accuracy improvement by 0.1 - 0.3%. In the case of the scaling factor, regardless of the imputation chip platform, a setting of -1 resulted in a better accuracy increased by 0.5 to 1.6% compared to the other scaling factors. In conclusion, this study revealed that Hanwoo custom v1 used as the imputation reference chip platform and a scaling factor of -0.5 can improve the accuracy of the estimated breeding value in the Hanwoo population. This information could help to improve the current evaluation system.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.266-270
• /
• 2014

In this paper, the effects of superconducting fault current limiter (SFCL) installed in power distribution system on reliability are evaluated and analyzed. The fault current will be decreased in power distribution system with SFCL because of the increased impedance of SFCL. The decreased fault current will improve the voltage drop of the bus of substation. The voltage drop is an important factor of power distribution system reliability. In this paper, improvement of reliability worth is analyzed when SFCLs are installed at the starting point in power distribution system. First, resistor-type SFCL model is used in PSCAD/EMTDC. Next, typical power distribution system is modeled. Finally, when the SFCLs with impedance 0.5 [${\Omega}$] are installed in feeder, power distribution system reliability is evaluated. Also, the improvement effect of reliability worth including the effect of voltage sag is analyzed using customer interruption cost according to whether or not SFCL is installed.

• 한국철도학회논문집
• /
• 제14권4호
• /
• pp.354-363
• /
• 2011

기존 철도교량은 과거로부터 각종 개량이 시행되고 있고 사회적·기술적인 요구 등으로 새로운 개량계획이 수립되고 있지만 해당 개소가 많고 소요비용이 막대하여 한정된 예산에서는 무엇보다도 효율적인 시행계획이 필요하다. 각종 개량계획을 체계화시키기 위해서는 시스템 차원의 문제로 간주하여 요소들을 정의하고 기술해야 하며 중요도, 상관관계 등은 평가기법을 이용하여 종합화가 이루어져야 한다. 이에 본 연구는 의사결정의 목적에 부합하도록 다양한 평가기준 하에서 대안들을 상호 평가하는 최적화 선정과정을 거쳐 각종 개량계획의 우선순위를 결정하고자 하였다. 체계화 설정과정과 선호도 평가를 위해 AHP 분석기법이 적용되었고 보다 적정한 개량계획의 요소를 도출 선정하고자 수행공학의 절차과정이 활용되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.87.1-87.1
• /
• 2011

The residential Fuel Cell system has high efficiency of 85% with transferring natural gas to electrical power and heat, directly and it is a friendly environmental new technology in that $CO_2$ emission can reduce 40% compared with conventional power generator and boiler. The residential fuel cell system consists of two main parts which have electrical and hot storage units. The electrical unit contains a fuel processor, a stack, an inverter, a control unit and balance of plant(BOP), and the cogeneration unit has heat exchanger, hot water tank, and auxiliaries. 5kW class fuel process was developed and tested from 2009, it was evaluated for long-term durability and reliability test including with improvement in optimal operation logic. Stack development was crried out through improvement of design and evaluation protocol. Development of system controller was successfully accomplished through strenuous efforts and original control logic was optimized in 5kW class PEMFC system. In addition, we have been focused on development of system process and assembly technology, which bring about excellent improvement of reliability of system. The 5kW class PEMFC system was operated under dynamic conditions for 1,000 hours and it showed a good performance of total efficiency and durability.

• 한국멀티미디어학회논문지
• /
• 제20권12호
• /
• pp.1970-1979
• /
• 2017

Computerization of educational administration following educational informatization of government has been steadily improved for the purpose of teachers' offload and job efficiency, finally resulting that NEIS(National Education Information System) has been completed. The NEIS consists of Nationwide service of NEIS, Business portal system of NEIS, Authentication management system and so on. Students, parents and civil petitioners handle civil affairs through Nationwide service of NEIS and teachers and persons of task conduct theirs business by accessing the Business portal system of NEIS. At this time, users have to obtain their certification from Authentication management system. Previous Studies were mainly focused on the evaluation about its performance according to the introduction of NEIS. But from now on there is a growing interest in security assessment and an efficient method for security improvement to check if NEIS works properly. Therefore, in this thesis, we'll propose an analytic framework in which security assessment is carried out after comprehending the fault structures through performing Fault Fishbone Analysis based on the Fault Tree Analysis. As a result of the system applied, the system had the highest rate of improvement to 47.7 percent.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.59-70
• /
• 2009

This study is the result of meta evaluation for the self evaluation of defense R&D programs in Korea by using meta evaluating indicators. The overall meta evaluation result of defense R&D programs gained 74.3 points out of 100, so it was evaluated as 'Good'. But it demonstrated that further improvement for overall system of defense R&D programs evaluation is required. And especially, it demonstrated that more alternatives are necessary in order to improve the utilizations and the feedbacks of evaluation results. The evaluation context component gained 80.2 points out of 100, so it was evaluated as 'Very Good'. The evaluation input component gained 73.1 points out of 100, so it was evaluated as 'Good'. The evaluation process component gained 74.8 points out of 100, so it was evaluated as 'Good'. And the evaluation outcome component gained 69.0 points out of 100, so it was evaluated as 'Good'. Basic model of meta evaluation was derived from the literature review and brain storming. And this meta evaluation model was determined by adopting the result of experts who performed evaluations for defense R&D programs in recent years. The reliability of components and items was verified by Cronbach's a coefficient. It was over 0.6 in evaluation components and items. And the reliability of evaluation context was 0.877, that of evaluation input was 0.755, that of evaluation process was 0.755, that of evaluation output was 0.755 respectively. From the analysis, it is attempted to identify possible problems and to find out the ways of improvements related to the self evaluation system of defense R&D programs. The ultimate objective of this study is to manage the programs effectively and improve the reliability and the objectiveness of the defense R&D programs.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.262-265
• /
• 2003

제조업에서는 품질관리가 잘 이루어지고 있는 가운데 우리나라 건설업에서는 1996년에 성수대교의 파괴 1997년의 삼풍 백화점의 분괴, 그리고 올해에 들어서도 지하철의 대 화제 등 건설업에 관련된 사건들이 많다. 건설업에 있어서는 품질 관리에 어려움이 많고 제대로 이루어지고 있지 않다. 이것은 제조업에서는 타 업체와 경쟁하기 때문이다. 품질이 안 좋으면 제품이 안 팔리기 때문에 업체는 열심히 품질을 개선하려고 한다. 그러나 주문생산 일품생산의 건설업에서는 제품의 단일성, 복잡성 등의 제반문제와 함께 주문생산 등, 주문을 받기만 하면 일정 규준에 합격만 하면 되기 때문에 더 이상 품질개선에 노력을 기울이지 않는다. 품질을 개선시키기 위해서는 기술적인 측면과, 문화적, 교육적인 측면에 크게 나눌 수 있다. 이 논문에서는 교육적인 측면 특히 평가방식에 대해서 연구하였다. 건설업에서는 어떤 평가가 이루어지고 있으면 품질개선을 위해서는 어떤 평가가 시행되어야 하는지 제지하였다. 지금까지는 건설업의 특수성, 복잡성 때문에 품질평가가 도입되어지지 않았으나, 한국의 건설업의 제품의 질을 높이려고 한다면 지어진 제품의 품질을 평가함으로써 경쟁시키는 것이 유익한 방법이다. 건설업체들이 자사제품의 품질을 개선하려고 수수로 노력을 하게 될 것이다.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.5-13
• /
• 2017

Purpose: Various studies have been performed to address the issue of increased energy use by buildings. In particular, research on complex envelopes that combines diverse envelope element techniques is currently in progress in the building sector. The present study aimed to develop an awning system using a light shelf, and to verify its validity through performance evaluation. Method: In the present study, a testbed was established for the performance evaluation of the awning system using a light shelf, and the uniformity ratio and lighting energy consumption were compared and analyzed relative to those with no awning and light shelf installation (Case 1), awning installation (Case 2), and light shelf installation (Case 3). Result: 1) In the present study, an awning system using a light shelf (Case 4) where an opening is made on the awning screen and natural light can be introduced through the light shelf located at the bottom was developed. 2) The optimum standard for Case 4 obtained through the performance evaluation was a 0.6m lighting length and a 2m extension length at a light shelf angle of $30^{\circ}$. 3) Case 4 with the optimum standard had a 5.5% lower uniformity ratio than Case 2, but had a higher uniformity ratio than Case 1 and Case 3. 4) Case 4 with the optimum standard showed 13.3%, 44.6%, and 0%~8.7% lighting energy reductions compared to Case 1, Case 2, and Case 3, respectively. 5) Based on the above results, Case 4 suggested in the present study was found to be effective for indoor light environment improvement and lighting energy reduction.