• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.63-72
• /
• 2006

Purpose: The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and Method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on future level (Group FIX-D), 2) Indirect method on fixture level(Group FIX-I), 3) Modified indirect method on fixture level(Group FD(-M), 4) Direct method on abutment level(Group AB-D) and 5) Indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^(R)$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results: The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2 In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error.

• 구강회복응용과학지
• /
• 제36권1호
• /
• pp.29-40
• /
• 2020

목적: Encoded healing abutment와 scan body를 이용한 디지털 인상과 pick-up 인상용 코핑을 이용한 인상 채득법의 정확도를 다른 임플란트 식립 각도에서 비교 연구하고자 하였다. 연구 재료 및 방법: 3D 프린터를 이용해 주모형을 제작하고 0°, 10° 및 20°의 근심경사로 3개의 임플란트를 위치 시켰다. 각각의 임플란트에 지대주를 체결하고 주모형을 스캔하여 참조 모델을 만들었다. P군 모델은 pick-up 인상용 코핑을 사용하여 15개의 석고 모형을 만들고 지대주를 장착 후 스캔하여 제작하였다. E군과 S군의 모델은 각각 encoded healing abutment와 scan body를 주모형에 체결하고 구내 스캐너를 이용해 15회씩 인상채득을 하여 제작하였다. 각각의 실험군 STL 파일은 best fit alignment를 이용해 참조 모델과 중첩하였고 root mean square (RMS) 값을 분석하였다. 결과: RMS 값은 P군에서 가장 작았고(25.56 ± 2.53 ㎛), 그다음 S군(35.27 ± 2.56 ㎛), E군(38.29 ± 4.12 ㎛) 순 이었다. S군과 E군 사이에는 유의차가 없었고, P군은 S군과 E군 보다 작았다(P < 0.05). 임플란트 각도와 RMS 값의 상관관계는 E군에서 유의하였다(P < 0.05). 결론:Pick-up 인상용 코핑 방법은 encoded healing abutment와 scan body 인상 채득 방법에 비해 더 높은 정확도를 보였고 encoded healing abutment와 scan body 인상 방법은 정확도에서 유의한 차이가 없었다. Encoded healing abutment의 임상적 사용은 가능하나 경사진 임플란트의 인상의 경우 주의하여 사용해야 할 것으로 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.124-129
• /
• 2017

PURPOSE. This study evaluated the effect of span length on the adaptation of implant-supported cobalt chromium frameworks fabricated by three techniques. MATERIALS AND METHODS. Models with two solid abutment analogs at different inter-abutment distances were digitized using a laboratory scanner. Frameworks of two-, three-, and four-unit fixed prostheses were designed by a computer. Six dots with a diameter of 0.2 mm were preset on the surface of each framework. A total of 54 implant-supported cobalt chromium frameworks were fabricated by milling, selective laser melting (SLM), and cast techniques. The frameworks were scanned and exported as Stereolithography files. Distances between two dots in X, Y, and Z coordinates were measured in both the designed and fabricated frameworks. Marginal gaps between the framework and the abutments were also evaluated by impression replica method. RESULTS. In terms of distance measurement, significant differences were found between three- and four-unit frameworks, as well as between two- and four-unit frameworks prepared by milling technique (P<.05). Significant differences were also noted between two- and three-unit frameworks, as well as between two- and four-unit frameworks prepared by cast technique (P<.05). The milling technique presented smaller differences than the SLM technique, and the SLM technique showed smaller differences than the cast technique at any unit prostheses (P<.05). Evaluation with the impression replica method indicated significant differences among the span lengths for any fabrication method (P<.05), as well as among the fabrication methods at any unit prostheses (P<.05). CONCLUSION. The adaptation of implant-supported cobalt chromium frameworks was affected by the span length and fabrication method.

• Journal of Veterinary Science
• /
• 제23권2호
• /
• pp.34.1-34.7
• /
• 2022

A 13-yr-old Shih tzu was referred for surgical management of right-sided cranial abdominal mass, which corresponded to large, cavitated renal mass on ultrasonography, and was suspected to represent neoplasia. Intraoperative impression smear cytology (ISC) of the renal mass wall was consistent with benign renal cyst (RC), without evidence of neoplasia or infection. Deroofing and omentalisation were performed and histopathology was consistent with benign RC. Chronic kidney disease was diagnosed 4 mon postoperatively, however, the dog was asymptomatic, without cyst reoccurrence. Intraoperative ISC is an expedient and inexpensive diagnostic technique that can guide most appropriate treatment in dogs with large RCs.

• 대한심미치과학회지
• /
• 제32권1호
• /
• pp.8-15
• /
• 2023

심하게 위축된 하악 치조제의 경우, 총의치의 통상적인 기능인상 과정을 통해서는 의치의 적절한 유지력과 안정성을 얻기가 어려울 수 있습니다. 이러한 환자에서는 중립대 인상기법을 사용하는 방식이 효과적인 대안이 될 수 있습니다. 중립 영역은 근육 신경계의 정상적인 구강 기능 동안 입 바깥쪽으로 향하는 혀의 압력과 안쪽으로 향하는 뺨과 입술의 압력이 균형을 이루는 영역으로 정의됩니다. 중립 영역 인상을 통해 만들어진 총의치는 유지력과 안정성을 향상시킬 뿐만 아니라 구치 부위에 적절한 혀 공간을 제공합니다. 또한 인공치아 주변 부위의 음식물 찌꺼기가 줄어들고 적절한 안면 지지대를 통해 미관이 개선됩니다.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.87-89
• /
• 2015

Closed reduction using acrylic splints with circummandibular fixation has been known to be useful techniques in pediatric mandibular fractures. However, this technique has some shortcomings, including needs for impression taking or additional laboratory process, which can increase the exposure time of general anesthesia or make an additional sedation visit. Recently, the advancement of computer-aided maxillofacial surgery offers to clinicians to expansion of its application. This case report represents a technique of computer-assisted virtual reconstruction and computer-aided designed splint fabrication in a 2-year-old boy with mandibular body fracture.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1129-1135
• /
• 2017

Due to the development of the media, the digital image is gradually developed, giving some motion to the still image called Cinemagraphs, thereby enhancing the visual perceptional ventilation. In today's advertising media, visual stimuli are transmitted through Cinemagraphs. Demonstrate what is conveyed by aesthetics through case studies and experimental studies. In addition, through Cinemagraphs, the possibility of aesthetic technique is confirmed, and the features of Cinemagraphs will become a new trend in the field of design studying digital images. As IT technology becomes increasingly sophisticated and easy to make, it is expressed as a cultural symbolic pleasure of the masses. The value of future research will be significant.

• 대한치과의사협회지
• /
• 제58권2호
• /
• pp.94-102
• /
• 2020

The form and location of chin is very important factor which determine the facial impression. Genioplasty is getting popular in order to improve the facial impression as facial beauty is considered as improvable factor. Through the geniplasty, chin can be moved to wanted location 3 dimensionally Genioplasty is relative simple but precise diagnosis and accurate surgical technique is very important for accurate and satisfying results. The form and shape of chin itself can be analysized and also must be evalulated in relation to the nose and lip and face. Author introduces the analysis of the chin, various surgical techniques of genioplasty and presents some cases.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.120-125
• /
• 2018

기존의 의치 인상채득 방법은 치조제 흡수가 심한 환자에게 사용하기에 한계점이 있으며, 의치상을 과도하게 연장하여 문제를 발생시킬 수 있다. 특히나 가동성조직이 존재하는 경우에는 정확한 인상 채득을 하기가 어렵고, 따라서 총의치의 적절한 안착을 방해할 수 있다. 치조제 흡수가 심한 환자에서 폐구법 인상을 이용하여 총의치를 제작하면 더 나은 안정성과 유지를 얻을 수 있다. 본 증례는 86세의 여자환자로 상악 전치부에 치은열성비대가 존재하며 하악의 심한 치조제 흡수를 보이는 무치악 환자이다. 따라서 Centric tray를 이용하여 잠정적인 교합고경을 결정 후 고딕아치 장치를 부착한 맞춤형 트레이를 제작하였고, 폐구법 인상채득을 시행하여 상하악 총의치를 제작하였으며, 의치의 충분한 안정성과 유지력을 얻어 환자의 만족도를 높였다.

• 구강회복응용과학지
• /
• 제34권1호
• /
• pp.56-62
• /
• 2018

총의치 제작을 위한 개구인상법은 술자의 숙련도에 따라 다르게 나타나며, 특히 구강전정이 얕은 환자에서는 변연이 과연장되어 채득되는 문제가 발생할 수 있다. 이러한 문제를 해결하기 위해 제안된 폐구인상법을 통한 총의치는 연하나 교합 시 의치상연 주위 전체를 가동 점막으로 봉쇄하여 의치상 내면에 일시적 음압이 형성되게 하여 의치의 유지와 안정을 높이도록 고안된 의치이다. 또한, 인상 채득 시 교합채득 및 묘기판을 이용한다면 악간관계 기록이 동시에 이루어지기 때문에 기존의 통상적인 방법보다 환자의 내원 횟수를 줄일 수 있다. 이 증례는 구강전정이 얕아 하악 의치의 유지력이 떨어져 불편을 겪는 환자에서, 폐구인상법을 이용한 총의치로 수복한 증례이다.