• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.546-554
• /
• 2007

Statement of problem: Die materials require abrasion resistance, dimensional stability with time, and high surface wettability for adequate material properties. Wear of gypsum materials is a significant problem in the fabrication of accurately fitting cast prosthetic devices. So It has been recommended that the use of die hardener before carving or burnishing of the wax pattern. Purpose: The purpose of this study was to compare the abrasion resistance and surface microhardness(Knoop) with 3 commonly used gypsum die materials(MG Crystal Rock, Super plumstone, GC $FUJIROCK^{(R)}$ EP) with and without the application of 2 die hardeners. Material and methods: Three die materials were evaluated for abrasion resistance and surface microhardness after application of 2 die hardeners(Die hardener and Stone die & plaster hardener). Thirty specimens of each gypsum material were fabricated using an impression of resin die(Pattern resin; GC Corporation, Japan) with 1-mm high ridges, sloped 90 degrees. Gypsum materials were mixed according to manufacturer's recommendations and allowed to set 24 hours before coating. Specimens were arbitrary assigned to 1 of 3 treatment subgroups (n=10/subgroup): no treatment(control), coated with Die hardener, and coated with Stone die & plaster hardener. Abrasion resistance(measured by weight loss) was evaluated using device in 50g mass perpendicular to the ridges. Knoop hardness was determined by loading each specimen face 5 times for 15 seconds with a force of 50g. A scanning electron microscope was used to evaluate the surface of specimens in each treatment subgroup. Conclusions: The obtained results were as follows: 1. 3 types of die stone evaluated in this study did not show significant differences in surface hardness and abrasive resistance(P<.05). 2. In the abrasive resistance test, there were no significant differences between GC $FUJIROCK^{(R)}$ EP and MG Crystal Rock with or without 2 die hardener(P<.05). 3. Super plumstone treated with Stone die & plaster hardener showed increased wear loss(P<.05) 4. Die hardener coatings used in this study decreased the surface hardness of the gypsum material(P<.05).

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.280-286
• /
• 2010

연구 목적: 본 연구는 다수의 임플란트에 의해 지지되는 보철물을, 두 가지 인상법에 의해 얻은 모형들에 연결한 후, 나사의 풀림 토크값을 측정하여 나사 결합부 안정성에 차이가 있는지를 알아보는데 그 목적이 있다. 연구 재료 및 방법: 네 개의 외부 육각 임플란트 (Br${\aa}$nemark $System^{(R)}$; Nobel Biocare AB)에 직접 연결되는 임플란트 상부 구조물과, 이와 수동적 적합을 갖는 완전 무치악 하악주모형을 만들었다. 이 주모형에서 비연결 인상법으로 6회 인상을 채득하여 6개의 모형 (1군)을 제작하고, 아크릴릭 레진을 이용한 연결 인상법으로 6회 인상을 채득하여 6개의 모형 (2군)을 제작하여, 총 12개의 실험모형을 제작하였다. 각 실험모형에 상부 구조물을 지대주 나사 ($TorqTite^{(R)}$ GoldAdapt Abutment Screw; Nobel Biocare AB)로 20 Ncm의 힘으로 조인 후 각 나사의 풀림 토크값을 총 2회 측정하였다. 두 군 간 나사의 풀림 토크값의 비교를 위한 통계분석은 반복측정을 고려하고 나사와 reading을 고정효과로, 모형을 랜덤효과로 포함하는 혼합모형 (mixed model)을 이용하여 유의수준 .05에서 실시하였다. 결과: 나사의 풀림 토크값의 평균은 7.9 Ncm (1군)과 8.1 Ncm (2군)이었으며, 4개 나사의 풀림 토크값 중 최소값인 최소 풀림 토크값의 평균은 6.1 Ncm (1군)과 6.5 Ncm (2군)이었다. 나사의 풀림 토크값은 두 군 간에 통계적으로 유의할 만한 차이가 없었고, 조인 순서와 위치가 서로 다른 4개의 나사 간의 풀림 토크값도 통계적으로 유의한 차이가 없었다. 최소 풀림 토크값도 두 군 간에 통계적으로 유의할 만한 차이가 없었다. 결론: 다수의 외부 육각 임플란트에 의해 지지되는 보철물에서, 나사의 풀림 토크값과 최소 풀림 토크값은 비연결 인상법과 연결 인상법에 의해 얻어진 모형 간에 차이가 없어, 나사 결합부 안정성에 차이가 없는 것으로 판단된다.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.353-360
• /
• 2010

본 논문에서는 단 한번 만의 간단한 구형 인덴테이션 임프레션 실험을 통하여 재료 소성 물성치를 측정함에 있어서 효율적인 알고리즘이 개발되었다. 본 논문에서는 레프리젠터티브 스트레인의 새로운 정의를 기반으로 연구가 수행되어 예전의 연구와 비교할 때 상당한 량의 피팅 매개변수의 개수를 줄이게 됨으로서 계산 량이 대폭 줄어들면서 연구가 쉽게 진행될 수 있었다. 또한 레프리젠터티브 스트레인에 대한 새로운 정의는 보다 명확한 물리적 임의를 부여하였다. 역 해석의 신뢰성을 증명하기 위하여 본 논문에서는 거의 모든 공학적 금속과 합금이 포함되는 재료 세트들을 사용하여 해석을 진행하였다. 수치 해석 모델링을 통하여 얻은 P-${\delta}$ 그래프를 바탕으로 하여 인덴테이션 반응 특성과 재료의 탄소성 물성치가 양 함수에 의하여 연계되었고, 역 해석방법을 적용시켜 재료의 항복응력과 power-law 경화 지수가 얻어진다. 마지막으로, 역 해석을 통하여 얻어진 재료 물성 치와 실제 실험을 통하여 얻어진 재료 물성치가 좋은 일치성을 가진다는 것을 보여준다.

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.21-39
• /
• 2010

The purpose of this study is to develop a creative technique in fashion illustration through analyzing expressive characteristics of $d{\acute{e}}paysement$. This study is analyzed by examining the general theories of $d{\acute{e}}paysement$ and investigating the expressive technique related to the method of $d{\acute{e}}paysement$ in surrealism art and the expressive characteristics which is applied to fashion illustration. In this study, the researcher examines cases of the application of $d{\acute{e}}paysement$ to the fashion illustration through reviewing fashion illustrators' art works created since 2000. $D{\acute{e}}paysement$ is unfamiliar impression with lexical meaning in french that is translated by transposition or displacement technique, or country and one's home leave or person put in strange living environment. The characteristics of $d{\acute{e}}paysement$ in fashion illustration include spatial distortion, combination of heterogeneous objects located anywhere odd and modification and conversion of objects such as material change, change-over of scale in usual objects and conversion of inanimate objects into organism. As a result of reviewing the expressive characteristics of Depaysement from fashion illustration artworks, it is found that the fashion illustration with $d{\acute{e}}paysement$ fortified the individuality in fashion illustration and helps produce a creative inspiration which results in a distinctive ideas. This also has a greate possibilities to produce a tremendous ideas in fashion illustration.

• 복식
• /
• 제58권4호
• /
• pp.72-85
• /
• 2008

With the new millennium setting in, our society is plowing its way through more drastically changing currents than ever. Nowadays, many people believe that high tech such as the Internet, digital civilization, the IT revolution, bio-industry, and the genome project, that has brought humans material prosperity, is the right change in direction. However, the more we adopt high tech into our lives, the more we desire high touch in order to achieve a balance. In other words, we need something to act as a ballast to stabilize our minds. As such, the more high tech develops, the more individuals miss and search for tools that appeal to their emotions. Because of this, although high touch is an opposite concept to high tech, it coexists with high tech, and it is defined as "human contact of high sensitivity that stimulates the emotion of humans". High Touch, a term which originated from "High Tech, High Touch", a book written by American futurist John Naisbitt, refers to human contact that makes human life richer, forminga deep impression on individuals and providing comfort. As such, high touch, which is gaining significant attention in modern society, is a phenomenon occurring throughout politics, society, culture, art, and religion, together with high tech. Through high touch, modern people must realize how to understand and accept a modern society that is dominated by the age of technology and in which direction they should head. Under this background, this study has the following objectives: to interpret the concept of high touch in the age of high tech in association with formative art and fashion, and through various media examine the desire for expression that may stimulate emotion in modern people, which is required by the high tech-prevalent modern society. It further analyzes how high touch is reflected in modern fashion and presents the direction future fashion should head in.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.7-18
• /
• 2006

본 연구는 한강교량의 야간경관조명에 관한 조명연출효과를 분석하기 위해 한강교량 8곳을 대상으로 경관조명 현황을 조사하였다. 선행연구를 통해 교량의 경관조명에 있어서 중요한 조명학적물리량 평가요소로 '휘도대비', '색상', '색온도'를 선정하였다. 디지털 광학 계측기인 Radiant Imaging Prometric 1400에 의해 측정된 휘도 색온도 색도분포 등의 물리량 분석결과, '교량의 구조형식' 및 '조명광원'이 한강교량의 야간경관조명의 물리적 특징에 큰 영향을 미치는 요소로 나타났으며, 특히 '교량의 구조형식'에 따라 강조하는 경관조명의 패턴이 유사하게 나타났다.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.286-318
• /
• 1992

The objective of preventive dentistry is the maintenance of a healthy dentition for the life of a patient. Unfortunately, if an individual has not received the benefit of a comprehensive program of preventive dentistry and has finally reached the edentulous state, as a consequence, he receives a set of complete denture. Dentures are mechanical devices and subject to the principles of mechanics. In some cases, the general health and nutritional status of the patient are felt to be the causative factors. But, the most important thing in residual ridge resorption is felt to be caused by the unequal distribution of functional forces. This study was to analyze mandibular stresses of complete denture occlusion by three dimensional finite element method. The results were as follows ; 1. As deformation and stress distribution of the complete denture of the mandible were concentrated on the upper lingual side of the mandible, alveolar ridge resorption of the mandible occurred from lingual side to labio-buccal side. 2. Analyzing by three dimensional F. E. M., the mandible is a very effective form for tolerating stress and deformation biomechanically. 3. According to the concentration of stress distibution in the upper buccal side of the lower posteriors, buccal shelf area must be a primary stress bearing area in the lower complete denture. 4. Lower complete denture moved horizontally to the balancing side under lateral occlusal force. 5. Bilateral balanced occlusion should be constructed in the complete denture for denture stability, especially in the protrusive movement. 6. Physical property of the denture base material was as important for stress distribution in the denture base as or even more than that in the mandible. 7. Impression technique is very important because of most of stress was concentrated between them due to close contact of the mandible and the denture base.

• 대한치과보철학회지
• /
• 제54권4호
• /
• pp.445-450
• /
• 2016

Piezography는 발음을 이용하여 채득된 보철 공간을 의미하며, 의치의 인공치와 연마면의 위치를 결정하는 참고점으로 사용하게 된다. 본 증례 대상은 67세 여성환자로, 새 의치 제작을 주소로 내원하였다. 기존 의치에서 2급 악간관계와 불량한 유지력을 확인할 수 있었으며, 안정적인 의치를 위해 piezography와 설측교합을 이용하기로 하였다. 통상적인 방법으로 인상 채득 후 주모형 상에서 상하악 기초상과 왁스 교합제를 제작하였고, 별도로 piezography를 위하여 하악에 추가적인 기초상을 하나 더 제작하였다. 이 추가 기초상에 실리콘 인상재를 적용 한 뒤 '시', '소', '메', '테', '데', '무' 여섯개의 발음으로 piezography를 채득하였다. 하악 인공치를 이 보철공간에 맞추어 배열한 뒤, 형태를 수정하여 설측 교합을 부여하였다. 그 결과, 환자는 새로운 의치에 기능적, 심미적으로 만족하였다.

• The Journal of Advanced Prosthodontics
• /
• 제10권4호
• /
• pp.328-334
• /
• 2018

PURPOSE. To evaluate the reproducibility of scan-based abutments using a blue light model scanner. MATERIALS AND METHODS. A wax cast abutment die was fabricated, and a silicone impression was prepared using a silicone material. Nine study dies were constructed using the prepared duplicable silicone, and the first was used as a reference. These dies were classified into three groups and scanned using a blue light model scanner. The first three-dimensional (3D) data set was obtained by scanning eight dies separately in the first group. The second 3D data set was acquired when four dies were placed together in the scanner and scanned twice in the second group. Finally, the third 3D data set was obtained when eight dies were placed together in the scanner and scanned once. These data were then used to define the data value using third-dimension software. All the data were then analyzed using the non-parametric Kruskal-Wallis H test (${\alpha}=.05$) and the post-hoc Mann-Whitney U-test with Bonferroni's correction (${\alpha}=.017$). RESULTS. The means and standard deviations of the eight dies together were larger than those of the four dies together and of the individual die. Moreover, significant differences were observed among the three groups (P<.05). CONCLUSION. With larger numbers of abutments scanned together, the scan becomes more inaccurate and loses reproducibility. Therefore, scans of smaller numbers of abutments are recommended to ensure better results.