• Journal of the International Relations & Interdisciplinary Education
• /
• v.2 no.2
• /
• pp.9-33
• /
• 2022

This paper mainly studies the national impression of college students on South Korea, selects students from some key universities as the target population, and conducts an in-depth investigation from the overall impression of South Korea, diplomatic image, food culture, language culture, tourism, entertainment circle and other aspects. Through a questionnaire survey of Chinese college students, this paper studies the image of South Korea in the eyes of contemporary Chinese college students, including the following aspects: First, Research the current Chinese college students' perception of the overall image of South Korea; Second, it studies the current Chinese college students' perception of the image of South Korea in the diplomatic, language, food, tourism and entertainment circles, and analyzes the internal dimensions of the image of South Korea in the minds of Chinese college students; Third, it studies the current Chinese college students' cognition of the overall image of South Koreans, and analyzes the internal dimensions of the image of South Koreans in the minds of Chinese college students; Fourth, to investigate the evaluation of Chinese college students on the image of South Korea. The survey results are analyzed from the perspectives of all subjects and gender differences, combined with the theories of communication and intercultural communication, and suggestions and prospects for the future development of the national image are made.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.17-24
• /
• 2017

Purpose: The purpose of this study was to evaluate the internal fitness of the resin coping that was fabricated by the traditional and Digital manufacturing methods through 3-dimensional analysis. Methods: maxillary right second molar was chosen implant master model. Custom-built impression trays were manufactured. After screwing the pick-up impression coping onto the master cast, impressions were made with silicone impression. The Working model was then made with type IV stone. The coping was fabricated: SLAC group (n=8), APPC group (n=8), LAPC group (n=8) Resin coping data was measured by using a three-dimensional evaluation program. Internal fitness was calculated by RMS (Root Mean Square).It measures mean and Standard Deviation (SD). Results: Three groups are measured $47.11{\pm}(3.08){\mu}m$ total RMS of SLAC group, $48.35({\pm}1.55{\mu}m)$ for total RMS of LAPC group, $43.45{\pm}2.09{\mu}m$ for total RMS of APPC group. Measured value is gradually increased. Followed by autopolymerized pattern resin; Stereolithography resin, Light-activated pattern resin But there were no differences stastically(P>0.321). Conclusion: Evaluation of internal fitness on Resin copings was fabricated by three-ways methods showed that no differences statistically significant and clinically acceptable results.

• Proceedings of the Korea Fashion and Costume Design Association Conference
• /
• 2005.06a
• /
• pp.92-94
• /
• 2005

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.261-270
• /
• 2021

Purpose. The aim of this study was (1) to compare the reverse engineering technique with other existing measurement methods and (2) to analyze the effect of implant angulations and impression coping types on implant impression accuracy with reverse engineering technique. Materials and methods. Three different master models were fabricated and the distance between the two implant center points in parallel master model was measured with different three methods; digital caliper measurement (Group DC), optical measuring (Group OM), and reverse engineering technique (Group RE). The 90 experimental models were fabricated with three types of impression copings for the three different implant angulation and the angular and distance error rate were calculated. One-way ANOVA was used for comparison among the evaluation methods (P < .05). The error rates of experimental groups were analyzed by two-way ANOVA (P < .05). Results. While there was significant difference between Group DC and RE (P < .05), Group OM had no significant difference compared with other groups (P > .05). The standard deviations in reverse engineering were much lower than those of digital caliper and optical measurement. Hybrid groups had no significant difference from the pick-up groups in distance error rates (P > .05). Conclusion. The reverse engineering technique demonstrated its potential as an evaluation technique of 3D accuracy of impression techniques.

• Korean Journal of Social Welfare
• /
• v.60 no.1
• /
• pp.77-102
• /
• 2008

The purpose of this study is to know what impression management(IM) tactics social work applicants use in their job interviews and what relation between their IM tactics and interviewers' evaluation exists. To accomplish this purpose, we reviewed the precedent researches about IM and conducted a qualitative study with the applicants in a community welfare center which adopted open approach in recruitment process. We analyzed the applicants' IM tactics through observing video-taped interview sessions and reviewing interviewers' rating paper. The results showed that the social work applicants mainly used self-promotion tactic for emphasizing their strengths and justification tactics for expressing their weaknesses. Some applicants often used fit-with-organization and other-enhancement belonged to ingratiation tactics. According to interviewers' rating results, the applicants with deep eye contact, calm attitude or smiling face gave a good impression to the interviewers. In the final discussion, an applicant who adopted diverse verbal and non-verbal tactics and expressed her point clearly was perceived attractive by the interviewers and accepted as the best choice. Based on this qualitative analysis, we have made several practical suggestions for social work applicants, social work researchers and social work organizations.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.37-42
• /
• 2013

Purpose: The purpose of this study was to evaluate the repeatability of dental white light scanner. Methods: The impression(Zerosil, Dreve, Germany) were digitized in white light scanner(Identica, Medit, Korea) to create 3-dimensional surface-models. The distribution of the discrepancies between the number of points in the corresponding CRM models and the point clouds in the others were measured by a matching-software(PowerInspect 2012, Delcam Plc, UK). The discriptive statistics were used for statistical analysis(SPSS 20.0). Results: The measurement of repeatablity showed very good reliability. The mean(SD) discrepancy value on the white light scanner digital models was 8.7(0.67) ${\mu}m$, based on SD and absolute mean values. Conclusion: These in vitro studies showed that repeatability of dental white light scanner is high reliability. These results can be confirmed in further clinical studies.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.22-29
• /
• 2014

PURPOSE. This study aimed to investigate the potential clinical application of digitized silicone rubber impressions by comparing the accuracy of zirconia 3-unit fixed partial dentures (FPDs) fabricated from 2 types of data (working model and impression) obtained from a laser scanner. MATERIALS AND METHODS. Ten working models and impressions were prepared with epoxy resin and vinyl polysiloxane, respectively. Based on the data obtained from the laser scanner (D-700; 3Shape A/S, Copenhagen, Denmark), a total of 20 zirconia frameworks were prepared using a dental CAD/CAM system (DentalDesigner; 3shape A/S, Copenhagen, Denmark / Ener-mill, Dentaim, Seoul, Korea). The silicone replicas were sectioned into four pieces to evaluate the framework fit. The replicas were imaged using a digital microscope, and the fit of the reference points (P1, P2, P3, P4, P5, P6, and P7) were measured using the program in the device. Measured discrepancies were divided into 5 categories of gaps (MG, CG, AWG, AOTG, OG). Data were analyzed with Student's t-test ($\alpha$=0.05), repeated measures ANOVA and two-way ANOVA (${\alpha}=0.05$). RESULTS. The mean gap of the zirconia framework prepared from the working models presented a narrower discrepancy than the frameworks fabricated from the impression bodies. The mean of the total gap in premolars (P=.003) and molars (P=.002) exhibited a statistical difference between two groups. CONCLUSION. The mean gap dimensions of each category showed statistically significant difference. Nonetheless, the digitized impression bodies obtained with a laser scanner were applicable to clinical settings, considering the clinically acceptable marginal fit ($120{\mu}m$).

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.187-195
• /
• 2021

In order to assess the cell toxicity of 10 instruments made of polymers, the MTT assay which utilizes the L-929 cell was selected. Specimens were eluted at a temperature of 37℃ for 24 hours at a rate of 4g per 20mL, RPMI 1640, and then was positively and negatively contrasted with a control test solution, in accordance with the Notification No. 2020-12 Protocols of Medical Apparatus Biological Safety from the Ministry of Drug and Food Safety. As a result of 24 hours of incubation in 37℃, 5% CO₂ Incubator and assessment using an ELISA reader, the results of Intraoral camera indiciated a cellular viability of more than 70% at a 50% eluate. But, the Plastic impression tray, 3D printing tweezer, Impression disposable syringe, Dental floss holder, Hand implant scaler, Surgical retractor, Oral scanner tip, Dental mirror, and the Water pick tip all reported a cellular viability of more than 70% at a 100% eluate, which indicates that do not exhibit cytotoxicity, thus allowing it to be used in contact with the mucous membrane of the oral cavity.

• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.28-35
• /
• 2024

Purpose: To evaluate the three-dimensional trueness of upper and lower denture bases produced using a digital light processing (DLP) printer and immersed in a constant-temperature water bath. Methods: An edentulous model was prepared and fitted with denture bases and occlusal rims manufactured using base plate wax. After scanning the model, denture bases, and occlusal rims, complete denture designs were created. Using the designs and a DLP printer, 10 upper and 10 lower complete dentures were manufactured. Each denture was scanned before (impression surface of upper denture base before constant temperature water bath [UBC] and impression surface of lower denture base before constant temperature water bath [LBC] groups) and after (impression surface of upper denture base after constant temperature water bath [UAC] and impression surface of lower denture base after constant temperature water bath [LAC] groups) immersion in the constant-temperature water bath. Scanned files were analyzed by comparing reference and scanned data, with statistical analysis conducted using the Kruskal-Wallis test (α=0.05). Results: Statistical analysis revealed no significant differences between the UBC and LBC groups, nor between the UAC and LAC groups (p>0.05). However, significant differences were observed between the UBC and UAC groups and between the LBC and LAC groups, i.e., before and after the constant-temperature water bath for both maxillary and mandibular denture bases (p<0.05). Conclusion: Denture bases not immersed in the constant-temperature water bath (UBC and LBC groups) exhibited error values within 100 ㎛, whereas those immersed in the water bath (UAC and LAC groups) showed error values exceeding 100 ㎛.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.435-438
• /
• 2003

A townscape has been a main factor in urban-development problems in Japan. In the townscape, keeping harmony with environment is a common goal. But useful and meaningful goals are expressing individuality and impression of the town in the townscape. In this paper, we propose the colony planning support system system to improve the townscape. The system finds propositional colour combinations based on three elements, town image, colour harmony, and cost. The targets of this model are mostly townscapes in residential areas that already exist, In this paper, we introduce the construction of a Kansei evaluation model to quantify the impression. First, we conducted computer-based evaluational experiments for 20 subjects using the SD method to clarify the relationship between town image and street colours. We chose 16 adjective words related to town image and prepared 100 colour picture samples for the evaluation. After the experiments, we constructed the model using a neural network for each word. We chose 62 experimental results for the training data of the neural network and 20 results for the testing data. Each colour in the data was selected to have unique hue, brightness or saturation attributes, After the construction, we tested the model for accuracy. We input the testing data into the constructed model and calculated errors between the output from the model and the experimental results. Testing of the model showed that the model worked well for more than 80％ of the samples. The model demonstrated influences of colours on the town image.