• KSBB Journal
• /
• 제28권6호
• /
• pp.356-365
• /
• 2013

The novel Aloe gels were prepared with dewatering and impregnation by soaking (DIS) processing of Aloe vera leaf slice at four different temperatures (25, 35, 45 and $55^{\circ}C$), using dehydration solution of 40% (w/v) polyethylene glycol (PEG4000). The PEG-impregnation to Aloe vera leaf slice during DIS was observed depending on immersion temperature, and the PEG-impregnated Aloe vera gel (PEG-i-AVG) obtained was characterized using $^1H$ NMR, FT-IR, GPC, XRD and TGA. The PEG-i-AVG had the higher levels of Aloe bioactives (glucomannan and O-acetyl contents) and better quality indices by $^1H$ NMR and FT-IR spectroscopy than those of native Aloe gel. Also, the obtained Aloe gel maintained the bimodal patterns in higher molecular weight region by GPC indicating no degradation of polysaccharide from native Aloe gel. The result observed by SEM confirmed a surface modification by forming the porous structure, and TGA result exhibited better thermal stability than that of native Aloe gel. XRD result revealed that the crystalline structure in Aloe gel was led by incorporation of PEG. Significant decrease of %insolubility and high enhancement of water solubility index were observed, respectively, and highly ordered conformation such as a helix structure was also indicated by Congo red reaction. We concluded that the modification effect for enhancing function of native Aloe gel was successfully obtained by DIS process using PEG as a dehydrating agent. These results suggested that this DIS process had a high potential for developing a new minimally processed product from Aloe vera leaf.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.200-203
• /
• 2012

Epoxy/mica composite was synthesized, in order to use it as an impregnation resin in a vacuum pressure impregnation (VPI) process, for manufacturing a high voltage rotary machine. The average particle size of the mica was 5~7 ${\mu}m$ and its content was 0, 20, 30 and 40 wt%. A plasticizer or a low molecular aliphatic epoxy was also used, to decrease the viscosity of the composite. The AC electrical breakdown strength was estimated in sphere-to-sphere electrodes, and the electrical breakdown data were estimated by Weibull statistical analysis. The electrical breakdown strength became higher with the addition of mica; and that of the system with 20 wt% mica was highest. The electrical breakdown strength of the system with an aliphatic epoxy was higher than that of the system with a, plasticizer.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.661-662
• /
• 2006

Development of recycling method at cemented carbide scraps was researched. Some properties of recycled cemented carbides were investigated. Recycled WC fine powder suffered the surface oxidation. Therefore it was necessary to be done by reduction treatment at 1073K-3.6ks under hydrogen atmosphere. When sintering condition at 1673K-3.6ks was treated under vacuum condition, it gained the deflective strength of about 90%, and gained hardness and sintering density about same value compared with commercial alloys. As a result, it was able to recycle only by 7 processes.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.77-80
• /
• 2004

The purpose of this study was to examine effects of combustion retardation for paper filter impregnated metal salts by measurement of extinguishing concentration, CO concentration, and limiting oxygen index(LOI, ASTM D 2863). And thermal stability analysis using DSC was carried out. In case of extinguishing concentration, $NH_4H_2PO_4$ showed excellent effect of combustion retardation. The result of LOI measurement showed that metal salts possessed good effect of combustion retardation. And thermal analysis using DSC showed that these metal salts possessed thermal stability. In case of CO concentration, CO concentration was increasing because of imperfect combustion process due to combustion retardation effect of metal salts.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.260-268
• /
• 2021

Adsorption is the most promising technology used to adsorb CO2 to reduce its concentration in the atmosphere due to its functional effectiveness. Various porous materials have been extensively synthesized to boost CO2 adsorption efficiency, for example, zeolite. Here, we report the synthesis process of zeolite adsorbent impregnated with amine, combining the benefit of these two substances. We compared conventional heating with microwave-assisted heating by varying concentrations of monoethanolamine in methanol (10% v/v and 40% v/v) as a liquid solution. The results showed that monoethanolamine impregnation helps significantly increase adsorption capacity, where adsorption occurs as a physisorption and not as chemisorption due to the adsorbent's steric hindrance effect. The highest adsorption capacity of 0.3649 mmol CO2 / gram adsorbent was reached by microwave exposure for 10 minutes. This work also reveals that a decrease in CO2 adsorption capacity was observed at a longer exposure period, and it reached a constant 40-minute adsorption rate. Impregnating activated zeolite with 40% monoethanolamine for 10 minutes in addition to microwave exposure (0.8973 mmol CO2 / gram adsorbent) is the maximum adsorption ability achieved.

• 전기화학회지
• /
• 제5권1호
• /
• pp.7-12
• /
• 2002

염수 전해 공정에서 산소음극형 가스화산전극의 적용에 대해 연구, 조사하였다. 가스확산전극은 반응층, 가스확산층, 급 전체로 구성된다. 반응층은 친수성 카본블랙, 소수성 카본블랙, PTFE(polytetrafluoroethylene), 은거울반응이나 함침법에 의해 담지된 은 촉매로 제조하였다. 가스확산충은 소수성 카본블랙과 PTFE로 제조되며, 반응층 내에 사용되는 급전체는 Ni망을 사용하였다. 실험에 의하면 함침법에 의해 Ag촉매를 반응충 카본에 담지시켜 제작된 전극$(Ag\;10wt\%$,바인더 $20wt\%)$이 산소음극 과전압이 약 700mv, 전해조에 장착하여 측정한 전해전압(전해 조건이 $80^{\circ}C,\;32wt\%$ 가성소다 그리고 $300 mA/cm^2$의 전류 밀도)이 약 2.2V로 가장 우수한 결과를 나타내었다. 이는 기존 공정의 전해전압 3.4V에 비해 $30\%$이상 저감된 결과이다. 또한 개발된 가스확산 전극은 염수 분해용 전해 공정에서 3개월 연속 운전이 가능하였다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.430-434
• /
• 2014

$SiC_f$/SiC composites were prepared using the hybrid process of chemical vapor infiltration (CVI) and polymer impregnation and pyrolysis (PIP). Before the application of PIP, partially matrix-filled preform composites with different densities were fabricated by control of chemical vapor infiltration time and temperature. The changes of the final density of the $SiC_f$/SiC composites had a tendency similar to that of preform composites partially filled by CVI. Composites with lower density after the CVI process had a larger increment of density during the PIP process. Three types of microstructures were observed on the fractured surface of the composite: 1) well pulled-out fibers and lower density, 2) slightly pulled-out fibers and higher density, and 3) only bulk SiC. The different fractions and distributions of the microstructures could have an effect on the mechanical properties of the composites. In this study, $SiC_f$/SiC composites prepared using a hybrid process of CVI and PIP had density values in the range of $1.05{\sim}1.44g/cm^3$, tensile strength values in the range of 76.4 ~ 130.7 MPa, and fracture toughness values in the range of $11.2{\sim}13.5MPa{\cdot}m^{1/2}$.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.100-110
• /
• 2016

Alkaline Peroxide Mechanical Pulping (APMP) of Pinus densiflora harvested from domestic mountains was explored. APMP contributes to various advantages including pulp quality, elimination of the need for a bleaching process, and energy savings. Sequential treatment of impregnation of bleaching chemicals and refining not only overcome the concern of alkaline darkening of wood chips during chemical impregnation, but it also brightens the chips to the desired brightness levels suitable for writing and printing papers. APMP pulping from Pinus densiflora was greatly influenced by the dosage levels of hydrogen peroxide and sodium hydroxide. Alkaline peroxide treatment was carried out by applying one of three levels of hydrogen peroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips) and one of three levels of sodium hydroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips). Other chemicals including a peroxide stabilizers and metal chelation were constantly added for all treatments. Chemical treatment with a liquor-to-wood ration of 9:1 was carried out in a laboratory digestor. Compared to BTMP, APMP pulping displayed outstanding characteristics including the less requirement of refining energy, the better improvement of tensile strength, the more reduction of shives, and the greater increase of pulp brightness. In particular, when 4.5% of hydrogen peroxide with impregnation during 90 minutes was used, the brightness of APMP reached 64.9% ISO. Even though bulk of APMP was decreased with the increase of sodium hydroxide, a better and improved balance could be achieved between optical and strength properties. The spent liquor obtained from the discharge of the impregnation process at the dosage level of 4.5% hydrogen peroxide exhibited an equal level of residual peroxide with BTMP. In conclusion, APMP pulping showed successful results with Pinus densiflora due to its better response to the development of optical and physical properties compared to TMP pulping.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.635-641
• /
• 2014

수침고목재는 보존을 위해 치수안정화의 공정이 필요하다. PEG는 목재의 치수안정화에 가장 보편적으로 사용된다. PEG 40% 함침 후 동결건조 하는 방법은 간단하고 일반적인 방법중 하나이다. 그러나 PEG처리 후 폐액은 목재로부터 침출된 유기물에 의해서 검게 변하고 악취가 발생하기 때문에 재활용되지 못하고 폐기되었다. 폐액은 과산화수소의 산화작용에 의해 폐액의 검은색은 제거 가능하다. PEG는 보존처리 전, 후와 과산화수소의 산화작용 후에도 그 물성이 변하지 않아 재활용이 가능하다. 과산화수소에 의해 재활용된 PEG를 이용하여 수침고목재의 치수안정화에 대한 실험을 실시하였다. 치수안정화에 사용된 용액의 PEG와 재활용 PEG의 비율을 10:0, 7:3, 5:5, 3:7, 0:10 (pure PEG : 재활용 PEG)으로 하였다. 그리고 수침고목재를 용액의 농도 10, 20, 30, 40%로 각각 5일간 함침하였다. 모든 시험편은 25%의 중량 증가율을 보였으며, SEM을 이용하여 목재 내부 세포를 관찰한 결과 PEG의 함침은 매우 잘된 것으로 판단된다. 치수변화율은 4%이하로 모든 시료 동일하게 안정된 수치를 나타내어 재활용 PEG를 사용하여 보존처리하는 것은 새 PEG를 사용하는 것과 다르지 않은 결과를 나타내었다.

• 보존과학회지
• /
• 제27권4호
• /
• pp.395-401
• /
• 2011

석조 문화재의 보존을 위한 효과적인 처리 방법으로 제안되는 가압 함침 방법으로 methyl methacrylate (MMA), MMA-butyl acrylate (PMB73) 공조성물 및 MMA-vinyl trimethoxy silane (PMV5) 공조성물을 사용하여 사암 및 화강암에 함침 처리한 후 물리 화학적 특성을 평가하였다. 화강암과 비교하여 사암의 경우 함침율이 3.2 - 3.7 wt%로 높은 값을 보였고 고압 반응기 내에 감압 공정 도입 시 32%의 함침율 증가를 나타내었다. 물리화학적 특성인 발수성, 휨강도, 충격특성 및 초음파 속도 등도 화강암보다 사암에 대해 아크릴계 가압함침 처리제의 효과가 두드러지게 나타남을 알 수 있었고, 이는 사암의 공극이 많아 단량체 함침율이 크기 때문으로 해석할 수 있었다. 아크릴계 처리제별 사암에 대한 충격파괴 에너지는 PMMA의 경우 1.22 J, PMB73은 1.84 J, 그리고 PMV5의 경우 2.8 J을 나타내었다. 충격 특성에서 무기 특성을 개선한 PMV5가 최적의 성질을 나타내는 것은 아크릴계 처리제의 분자 구조보다는 처리제의 무기 친화 특성이 석재의 충격 특성에 더 많은 영향을 주기 때문으로 해석할 수 있었다.