DOI QR코드

DOI QR Code

AC Electrical Breakdown Characteristics of an Epoxy/Mica Composite

  • Park, Jae-Jun (Department of Electrical and Electronic Engineering, Joongbu University)
  • Received : 2012.07.03
  • Accepted : 2012.07.16
  • Published : 2012.08.25

Abstract

Epoxy/mica composite was synthesized, in order to use it as an impregnation resin in a vacuum pressure impregnation (VPI) process, for manufacturing a high voltage rotary machine. The average particle size of the mica was 5~7 ${\mu}m$ and its content was 0, 20, 30 and 40 wt%. A plasticizer or a low molecular aliphatic epoxy was also used, to decrease the viscosity of the composite. The AC electrical breakdown strength was estimated in sphere-to-sphere electrodes, and the electrical breakdown data were estimated by Weibull statistical analysis. The electrical breakdown strength became higher with the addition of mica; and that of the system with 20 wt% mica was highest. The electrical breakdown strength of the system with an aliphatic epoxy was higher than that of the system with a, plasticizer.

Keywords

References

  1. P. O. Henk, T. W. Kortsen and T. Kvarts, High Perform. Polym., 11, 281 (1999) [DOI: 10.1088/0954-0083/11/3/304].
  2. M. Ehsani, Z. Farhadinejad, S. Moemen-bellah, S. M. Bagher alavi, M. M. S. Shrazi and H. Borsi, 26th Internal Power System Conference, Tehran, Iran, 11-E-CAM-2359 (2011).
  3. Bajaj, N. K. Jha and A. Kumar, J. Appl. Polym. Sci., 56, 1339 (1995) [DOI: 10.1002/app.1995.070561015].
  4. Y. Xu, D. D. L. Chung and C. Mroz, Composites: Part A, 32, 1749 (2001) [DOI: http://dx.doi.org/10.1016/S1359-835X(01)00023-9].
  5. A. A. Wazzan, H. A. Al-Turaif and A. F. Abdelkader, Polymer-Plastics Technology and Engineering, 45, 1155 (2006) [DOI:10.1080/03602550600887285].
  6. R. Sarathi, R. K. Sahu and P. Rajeshkumar, Mater. Sci. Eng.: A, 445, 567 (2007) [DOI: 10.1016/j.msea.2006.09.077].
  7. N. Hayakawa, H. Maeda, S. Chigusa and H. Okubo, Cryogenics, 40, 167 (2000) [DOI: 10.1016/s0011-2275(00)00024-2].
  8. P. Gropper, T. Hildinger, F. Pohlmann and J. R. Weidner, 2012 CIGRE Session, Paris, A1-103 (2012).
  9. R. Bruetsch, M. Tari, K. Froehlich, T. Weiers and R. Vogelsang, IEEE International Symposium on Electrical Insulation, Vancouver, BC, Canada, p.162 (2008) [DOI: 10.1109/ELINSL.2008.4570301].
  10. P. Marek, F. Senn, W. Grubelnik and W. Ladstatter, Energize, 11, 51 (2007).
  11. T. Imai, F. Sawa, T. Ozaki, T. Shimizu, R. Kido, M. Kozako and Tanaka, Proceedings of 2005 International Symposium on Electrical Insulating Materials, p.1136 (2006) [DOI: 10.1109/ISEIM.2005. 193387].
  12. G. Chen, J. Zhao, S. Li and L. Zhong, Appl. Phys. Lett., 100, 222904 (2012) [DOI: 10.1063/1.4721809].

Cited by

  1. Properties of Polymer Composites Used in High-Voltage Applications vol.8, pp.5, 2016, https://doi.org/10.3390/polym8050173
  2. The influence of the interface between mica and epoxy matrix on properties of epoxy-based dielectric materials with high thermal conductivity and low dielectric loss vol.6, pp.86, 2016, https://doi.org/10.1039/C6RA11763E