• The Korean Journal of Ecology
• /
• v.26 no.3
• /
• pp.143-150
• /
• 2003

Korea has plentiful precipitation but rainfall events concentrate on several months of rainy season in her weather condition. Korea, therefore, experiences drought for a given period every year. Moreover the soil has usually low water holding capacity, as it is composed coarse particles originated from the granite. Response of several oaks and the Korean red pine (Pinus densiflora) on water stress showed that water budget was significant factor determining vegetation distribution. In addition, dehydration level due to cold resistance mechanism of several evergreen plants during the winter season was closely related to their distribution in natural condition. Experimental result under water stress showed that the Korean red pine was very tolerant to desiccation but the seedlings showed high mortality during the dry season. The mortality tended to proportionate to soil moisture content of each site. A comparison between soil moisture content during June when it is severe dry season and moisture content of the culture soil when the pine seedlings reached the permanent wilting point due to water withheld proved that high mortality during the dry season was due to water deficit. Water potential of sample plants measured during the exposure experiment to the air pollutant showed a probability that water related factors would dominate the occurrence of visible damage and the tolerance level of sample plants. In both field survey and laboratory experiment, plants exposed to air pollution showed more rapid transpiration than those grown in the unpolluted condition. The result would due to injury of leaf surface by air pollutants. Aluminum (Al/sup 3+/) increased in the acid soil not only inhibits root growth but also leads to abnormal distribution of root system and thereby caused water stress. The water stresses due to air pollution and soil acidification showed a possibility that they play dominating roles in inducing forest decline additionally to the existing water deficit due to weather and soil conditions in Korea. Sludge, which can contribute to improve field capacity, as it is almost composed of organic matter, showed an effect ameliorating the retarded growth of plant in the acidified soil. The effect was not less than that of dolomite known in widely as such a soil ameliorator. Litter extract contributed also to mitigate the water stress due to toxic Al/sup 3+/. We prepared a model showing the potential interaction of multiple stresses, which can cause forest decline in Korea by synthesizing those results. Furthermore, we suggested restoration plans, which can mitigate such forest decline in terms of soil amelioration and vegetation restoration.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.117-136
• /
• 1994

Contemporary global space economy is so dynamic that any one specific structural force can not explain the whole dynamic processes or trajectories of spatial industrial development. The major purpose of this paper is extending the traditional notion of industrial districts to functioning and development of new industrial districts with relation to the development of high technology industries. Several dynamic forces, which are dominated in new industrial districts in the modern space economy, are incorporated in the formation and dynamic aspects of new industrial districts. Even though key forces governing Marshallian industrial district are localization of small firms, division of labor between firms, constructive cooperation, and industrial atmosphere, Marshall points out a possibility of growing importance of large firms and non-local networks in the districts with changes of external environments. Some of Italian industrial districts can be regarded as Marshallian industrial districts in broader context, but the role of local authorities or institutions and local embeddedness seem to be more important in the Italian industrial districts. More critical implication form the review of Marshallian industrial districts and Italian industrial districts is that the industrial districts are not a static concept but a dynamic one: small firm based industrial districts can be regarded as only a specific feature evolved over time. Dynamic aspects of new industrial districts are resulting from coexistence of contrasting forces governing the functioning and formation of the districts in contemporary global space economy. The contrasting forces governing new industrial districts are coexistence of flexible and mass production systems, local and global networks, local and non-local embeddedness, and small and large firms. Because of these coexistence of contrasting forces, there are various types of new industrial districts. Nine types of industrial districts are identified based on local/non-local networks and intensity of networks in both suppliers and customers linkages. The different types of new industrial districts are described by differences in production systems, embeddedness, governance, cooperation and competition, and institutional factors. Out of nine types of industrial districts, four types - Marshallian; suppliers hub and spoke; customers hub and spoke; and satellite - are regarded as distinctive new industrial districts and four additional types - advanced hub and spoke types (suppliers and customers) and mature satellites (suppliers and customers) - can be evolved from the distinctive types and may be regarded as hybrid types. The last one - pioneering high technology industrial district - can be developed from the advanced hub and spoke types and this type is a most advanced modern industrial district in the era of globalization and high technology. The dynamic aspects of the districts are related with the coexistence of the contrasting forces in the contemporary global space economy. However, the development trajectory is not a natural one and not all the industrial districts can develop to the other hybrid types. Traditionally, localization of industries was developed by historical chances. In the process of high technology industrial development in contemporary global space economy, however, policy and strategies are critical for the formation and evolution of new industrial districts. It needs formation of supportive tissues of institutions for evolution of dyamic pattern of high technology related new industrial districts. Some of the original distinctive types of new industrial districts can not follow the path or trajectory suggested in this paper and may be declined without advancing, if there is no formation of supportive social structure or policy. Provision of information infrastructure and diffusion of an entrepreneurship through the positive supports of local government, public institutions, universities, trade associations and industry associations are important for the evolution of the dynamic new industrial districts. Reduction of sunk costs through the supports for training and retraining of skilled labor, the formation of flexible labor markets, and the establishment of cheap and available telecommunication networks is also regarded as a significant strategies for dynamic progress of new industrial districts in the era of high technology industrial development. In addition, development of intensive international networks in production, technology and information is important policy issue for formation and evolution of the new industrial districts which are related with high technology industrial development.

• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.27-37
• /
• 2012

Many studies have focused on the importance of organizational integration when companies try to achieve growth through mergers and acquisitions (M&A). However, there has been little research that focuses on the new branding or customer base integration of the M&A process, despite the fact that this integration is very important for achieving M&A goals and business performance in industries such as retail. The purpose of this study is to provide an M&A case study of the retail industry, focused especially on the new branding and customer integration of two department stores. This study examined key integration processes in terms of brand name and membership systems of both companies by examining how the merged company achieved its new branding and the integration of its membership systems. The methodology of this research is the case study, which is used in both normative and empirical studies for distribution research in Korea. This research analyzes the case of both new branding and customer membership systems of the two companies. The new branding initiatives of this case centered on decision making including brand extension and brand naming. The customer membership integration of the two companies is analyzed on the basis of the customer reward programs that include both financial and service rewards. This study shows the success factors of new branding and customer integration in the M&A process in terms of achieving marketing goals and business performance as follows: First, companies should identify the integration areas by analyzing the brand and membership of both companies and make a balanced decision for both the customer and company. Second, the goals of new branding and membership integration in the M&A process should not emphasize business efficiency from a short-term perspective but rather should consider brand power and business synergy from a long-term perspective. Third, the post-merger integration process of the brand or customer areas requires not only the organized execution of integration tasks but also follow-up programs for changes in business strategy and marketing-related programs to realize the synergy effects of integrated organization. Although this study provides a detailed review and analysis of the new branding and customer integration processes in post-merger integration and in identifying the primary decision-making areas of these processes, there are some limitations requiring further research that may overcome or compensate for these limitations. The suggested future research areas are as follows: First, since this research is a case study of only one M&A, it makes few theoretical contributions such as new propositions or theories or possibilities for generalization. This limitation can be overcome through further research using multiple cases, which may lead to new propositions. Second, the methodology of this study lacks sufficient rigor in terms of its analytic approach because this case study was developed and analyzed descriptively. Further research is needed to compensate for these limitations, such as using a theory-based approach or comparative analysis approach that makes case analysis more systematic.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.360-371
• /
• 1989

This study was performed to investigate effects of air pollution on the Pinus thunbergii forests in Onsan industrial districts, and environmental factors, contents of soluble sulfur in needles, and composition of sorest vegetation were examined. The results obtained in this study were summarized as follows ; 1. The pH of soils, organic matter and total N were low near the source of air pollutants, and sulfur contents in the soils was high in general. Especially there was significant correlation between the sulfur contents in the soil and pH at 1% level. 2. The contents of soluble sulfur in needles ranged from 0.13% to 0.25% and were generally high, and plot 2 and 3 were the highest of all. 3. In the number of species, 7 species appeared in plot 3 and 20 species in plot 7, and they were low near the source of air pollutants. Total number of individuls, species diversity and evenness increased with in creasing distance from the source of air pollutants. 4. There were significant correlations between the contents of soluble sulfur in needles and the number of species and species diversity at 5%, 1% level, respectively. 5. Importance value of each species was low near the source of air pollutants but Quercus species showed high values in all plots. 6. On these studied plots, Pinus thunbergii, Quercus serrata and smilax china were tolerant, and Rhododendron mucronulatum, Rhododendron yedoense var. poukhanense, Platycarya strobilacea and Lespedeza maritima were sensitive to air pollution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.43-49
• /
• 2005

Recently, according as people who have sensitive skin increase, we've been giving more importance to the safety of cosmetics. Especially, preservative is known to be one of the main stimuli which cause side-effects of cosmetics. However, there have been few reports describing cell cytotoxicity, skin penetration, oil-aqueous phase partition, anti-microbial activity of preservatives and their correlation with skin irritation. The study is aimed to develop low irritable preservative system with phenoxyethanol, one of the most commonly used preservatives in cosmetics, considering various factors mentioned above. According to our results of cell cytotoxicity against human normal fibroblasts by means of MTT assay, phenoxyethanol showed the lowest cytotoxicity when compared to other preservatives tested (cytotoxicity: pro-pylparaben > butylparaben > ethylparaben > methylparaben > triclosan > phenoxyethanol), but human patch test for assessing shin primary irritation revealed that phenoxyethanol has higher skin irritation than methylparaben and triclosan. We performed in vitro skin penetration test using horizontal Franz diffusion cells with skin membrane prepared from hairless mouse (5 ${\~}$ 8 weeks, male) to evaluate the rate of skin penetration of preservatives. From the results, we found that the higher irritable property of phenoxyethanol in human skin correlates with its predominant permeability (skin penetration: phenoxyethanol > methylparaben > ethylparaben > propylparaben > butylfaraben > triclosan). Therefore, we made an effort to reduce skin permeability of phenoxyethanol and found that not only the rate of skin penetration of phenoxyethanol but also its skin irritation is dramatically reduced in formulas containing oils with low polarity. In the experiments to investigate the effect of oil polarity on the oil-aqueous phase partition of phenoxyethanol, more than $70\%$ of phenoxyethanol was partitioned in aqueous phase in formulas containing oils with low polarity, while about $70 {\~} 90\%$ of phenoxyethanol was partitioned in oil phase in formulas containing oils with high polarity. Also, in aqueous phase phenoxyethanol showed greater anti-microbial activity. Conclusively, it appears that we can develop less toxic preservative system with reduced use dosage of phenox-yethanol and its skin penetration by changing oil composition in formulas.

• Journal of Technology Innovation
• /
• v.29 no.3
• /
• pp.1-31
• /
• 2021

With the growing importance of technology innovation as a key factor for firms' competitive advantage, 'innovation persistence' became also an important research subject. 'Innovation Persistence' is a concept that indicates whether or not firms' innovation activity or performance continues. However, the data used for innovation studies are carried out as cross-sectional surveys in most countries. For this reason, studies dealing with longitudinal aspect of innovation persistence are rare. In particular, there is almost no research on innovation persistence using Korean innovation survey data. This study reviews the concepts and characteristics of innovation persistence based on extant literature, and perform an empirical analysis on the status and features of Korean firms' technology innovation persistence. Based on the data of the Korean Innovation Survey (KIS) conducted every other year from 2012 to 2018, panel data on 3,379 firms which observed multiple times are constructed. As a result, only part of the firms with persistent innovation were observed (for innovation performance 10~12%, for innovation activity 15~17%), and it was found that the persistence of non-innovation was remarkable(about 52~57%). And it was confirmed that the persistence of innovation activities is stronger than that of innovation performance. Besides, some features by sub-types of innovation appeared. Product innovation showed higher persistence than process innovation, and internal R&D also showed higher persistence than joint/external R&D. As a result of additional logit analysis to identify factors, it was found that radical or gradual product innovation is the most influential factor in persisting innovation in the next period. Since the sample selection bias due to a limitations of raw data might exist in the panel data constructed in this study, it should be noted that faulty generalization of the results are not allowed. Nevertheless, this is the first study to examine the technology innovation persistence targeting Korean firms and is expected to be a starting point for follow-up studies. It is anticipated that advanced research results will be drawn through the establishment of official panel data and improved methodologies.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.337-357
• /
• 2021

Because the growth of paddy rice is affected by meteorological factors, the selection of appropriate meteorological variables is essential to build a rice yield prediction model. This paper examines the suitability of multiple meteorological datasets for the rice yield modeling in South Korea, 1996-2019, and a hindcast experiment for rice yield using a machine learning method by considering the nonlinear relationships between meteorological variables and the rice yield. In addition to the ASOS in-situ observations, we used CRU-JRA ver. 2.1 and ERA5 reanalysis. From the multiple meteorological datasets, we extracted the four common variables (air temperature, relative humidity, solar radiation, and precipitation) and analyzed the characteristics of each data and the associations with rice yields. CRU-JRA ver. 2.1 showed an overall agreement with the other datasets. While relative humidity had a rare relationship with rice yields, solar radiation showed a somewhat high correlation with rice yields. Using the air temperature, solar radiation, and precipitation of July, August, and September, we built a random forest model for the hindcast experiments of rice yields. The model with CRU-JRA ver. 2.1 showed the best performance with a correlation coefficient of 0.772. The solar radiation in the prediction model had the most significant importance among the variables, which is in accordance with the generic agricultural knowledge. This paper has an implication for selecting from multiple meteorological datasets for rice yield modeling.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.23-49
• /
• 2011

Faculty performance evaluation system has been settled down as an uncomfortable but unavoidable system, and it is one of the most important factors to grow the college competitiveness up. In this study, we selected and surveyed faculty evaluation models of several universities and colleges in Korea, and analyzed by comparing each evaluation areas of educational achievement, college-industry collaboration, research, and service. We also identified the properties of the current faculty evaluation models of the junior colleges, and derived several problems from these models such as an imitation of four-year university model, a disorders of job evaluation with respect to the attributes of classified jobs, a large variation of individual item weights, and an insufficient reflection of major characteristics. Based on these surveys and analysis, an improved faculty evaluation model for the junior college is proposed in this study. This model proposed four basic areas-educational achievement, college-industry collaboration, research, and service by considering the importance of the college-industry collaboration in the junior college-as well as the team evaluation area. Weights of the SCI-class paper was selected as a criterion for the arrangement of objective comparison of each evaluation items. We showed the integration method of several different evaluation model with respect to the attributes of classified jobs of each faculties, and evaluation plan of variational characteristics according to the majors of individuals in this model. Finally, we introduced an area fail and rating system to operate efficiently the proposed faculty evaluation model.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.260-279
• /
• 2010

The analysis on bibliography and field investigation of Callipogon relictus Semenov, 1898 (Korean natural monument number 218) shows that the size varies from country to country, and Korean specimens, for which male is 85~120mm and female is 65~85mm, are found to be the largest. The average diameter and length of egg are 2.60mm and 6.72mm respectively. The larva has milky color and is about 100~150mm in length. The pupa is nearly 70~110mm. An adult generally appears from June to September in Korea in the broadleaf forest of lowland, whereas it appears from June to July in China. It is known that the pupa largely feed on the old tree trunk of Carpinus laxiflora (Siebold & Zucc.) blume in Korea, but no such data have been reported in China and Russia, showing differences in host plants. While the larva period is not exactly known in Korea, it is reported to be two years in China. It appears that the species inhabits in very limited regions of approximately between geographical latitude $37.5^{\circ}{\sim}47.8^{\circ}$ and longitude $126^{\circ}{\sim}140^{\circ}$ including Korea, China and Russia. To conserve the long-horned beetle in Korea, this research drew out following some conclusions through analyzing the references and field survey data. First, it need to perform precise survey on the natural environment of occurring and collected area or place including host plant kinds, temperate, humidity, latitude, longitude etc. Second, habitat region must be designated as a restricted development area, and it need to exclude or reduce the damage factors to prosper reproduction of the species. Third, it is necessary to keep loosing cautiously artificial breeding individuals in the reported sites, not disturbing scope of natural populations. Fourth, it needs to educate or publicize many people importance and value of this species through many methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.513-521
• /
• 2019

The purpose of this research is to find out the preference of users on the characteristics of the subway sign blank. In detail, The purpose is to introduce the concept of designing various characteristics of the subway sign blank according to characteristics such as gender and age, etc. The methodology of this study is to investigate the preference of the characteristics of the characteristics of the subway sign blank space and analyze the preference of the whole group and the cluster group. A survey was conducted to investigate preferences. A cluster analysis was conducted to analyze the preferences. And a demographic and conjoint analysis was conducted for whole group and the cluster group. The attributes of the subway sign blank space for preference survey are as follow : top and bottom blank, side blank, border line blank, arrow thickness, 'station name' and 'line number' order. The results of the preference analysis are as follows. The importance of the attributes in the whole group is shown in the order of the border line blank, 'station name' and 'line number' blank, side blank, top and bottom blank, and arrow thickness. The cluster group is composed of 3 groups, 1 cluster is a woman who uses the subway almost every day, three to four times a week, and seems to prefer half the side blank. 2 crowd is the user who thinks that 60 or more subway signs are uncomfortable, and preferring the order of 'station name' + 'line number' order without border. The 3 clusters were men in their 20s and 30s, with a preference for 1/5 border line blank and thin arrow thickness. The conclusion is as follows. First, the characteristics of the subway sign blank must be designed consistently. However, it is necessary to consider various factors according to gender, age, and frequency of subway use for specific regions or routes. Secondly, It has been shown that, depending on the specific area or route, it is possible to design two or more types of design, not one type of standardized marking of the characteristics of the subway sign blank.