• 한국정보통신학회논문지
• /
• 제25권7호
• /
• pp.955-961
• /
• 2021

현대전에서는 전파를 이용하여 적의 정보를 알아내거나, 적이 탐지하려는 아군 정보를 보호하는 임무를 수행하는 전자전 분야의 중요성이 증가하고 있다. 전자전 분야의 대표적인 전자공격 방법 중 하나인 레이다 재밍기법은 적 레이다를 교란 및 기만하여 아군의 위치 정보가 노출되는 것을 방지한다. 레이다 재밍기법 중 하나인 속도기만 재밍기법은 도플러효과를 이용하여 표적의 속도와 위치를 추적하는 펄스 도플러 레이다를 대상으로 사용된다. 속도기만 재밍기법은 DRFM (Digital Radio Frequency Memory)을 이용하여 수신신호를 주파수 변조해서 송신하는 방법으로 구현할 수 있다. 본 논문은 위상 샘플방식 DRFM을 이용하여 속도기만 재밍기법 중 하나인 VGPO/VGPI 재밍기법을 구현하는 방안을 기술하고, 제작한 보드를 통해서 주입신호 환경 하에서 VGPO/VGPI 재밍기법의 동작을 검증하였다.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.67-74
• /
• 2017

This study proposes a novel random pulse-width modulation (PWM) technique with a constant switching frequency utilizing a random offset voltage. The proposed PWM technique spreads switching harmonics by varying the position of an active voltage vector without a switching frequency variation. The implementation of the proposed PWM technique is simple because it does not require additional hardware and complex algorithm. The proposed random PWM technique is compared with the conventional PWM technique on the factors of harmonic spectrum, total harmonic distortion, and harmonic spread factor to confirm the harmonic spread effect. The validity of the proposed method is verified by simulations and experiments on a three-phase inverter drive system.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.183-185
• /
• 2004

In this study, the combined electrokinetic and ultrasonic remediation technique, ultrasonically enhanced electrokinetic technique, was studied for the removal of heavy metal and organic substance in contaminated soils. The electrokinetic technique has been applied to remove mainly the heavy metal and the ultrasonic technique has been to remove mainly organic substance in contaminated soil. The laboratory soil flushing tests combined electrokinetic and ultrasonic technique were conducted using specially designed and fabricated devices to determine the effect of these both techniques. A series of laboratory experiments involving the simple, electrokinetic, ultrasonic, and electrokinetic & ultrasonic flushing test were carried out. A soil admixed with sand and kaolin was used as a test specimen, and Pb and ethylene glycol were used as contaminants of heavy metal and organic substance. An increase in out flow, permeability and contaminant removal rate was observed in electrokinetic and ultrasonic flushing tests. Some practical implications of these results are discussed in terms of technical feasibility of in situ implementation of electrokinetic ultrasonic remediation technique.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1517-1523
• /
• 2015

The wavelet PWM (WPWM) technique has been applied in two-level inverters successfully, but directly applying the WPWM technique to three-level inverters is impossible. This paper proposes a WPWM technique suitable for a single-phase three-level inverter. The work analyzes the control strategy with the WPWM and obtains the design of its parameters. Compared with the SPWM technique for a single-phase three-level inverter under the same conditions, the WPWM can obtain high magnitudes of the output fundamental frequency component, low total harmonic distortion, and simpler digital implementation. The feasibility experiment is given to verify of the proposed WPWM technique.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.21-27
• /
• 2011

In this paper, an approach to reduce common-mode voltage (CMV) at the output of multilevel inverters using a phase opposition disposed (POD) sinusoidal pulse width modulation (SPWM) technique is proposed. The SPWM technique does not require computations therefore, this technique is easy to implement on-line in digital controllers. A good tradeoff between the quality of the output voltage and the magnitude of the CMV is achieved in this paper. This paper realizes the implementation of a POD-SPWM technique to reduce CMV using a five-level diode clamped inverter for a three phase induction motor. Experimental and simulation results demonstrate the feasibility of the proposed technique.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.599-604
• /
• 2017

Nowadays reactance method is being used as a technique for fault location in parallel feeding AC traction power system. However, implementation of this method requires a large number of field tests(ground fault) which is a huge burden on the operators. This paper presents a new estimation technique using quadratic interpolation to reduce number of times for field test and improves the accuracy of fault location. To verify a new technique, we solve AT feeding circuit and model it using PSCAD/EMTDC. Finally this paper conducts a comparative analysis of usefulness between a new technique and real field data.

• 한국음향학회지
• /
• 제10권2호
• /
• pp.44-51
• /
• 1991

본 연구에서는 기존의 FM 스테레오 방송 방식과 비교하여 완전한 호환성을 유지하며, 표준부반송파에 90도 위상차를 갖는 변조 부반송파를 사용하여 직교 변조된 스테레오 신호를 압축하여 추가시키고, 수신단에서는 직교 복조 및 신장함으로써 스테레오 신호의 신호대 잡음비를 향상시킨 확장형 FM 방송에 대하여 연구하였다. 직교 변조, 복조 및 압축신장의 하드웨어 송신 및 수신 시스템을 구현하여 제안방식의 타당성을 확인하였다.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.285-291
• /
• 2011

A pose estimation process from medical images is calculating locations and orientations of objects obtained from Computed Tomography (CT) volume data utilizing X-ray images from two directions. In this process, digitally reconstructed radiograph (DRR) images of spatially transformed objects are generated and compared to X-ray images repeatedly until reasonable transformation matrices of the objects are found. The DRR generation and image comparison take majority of the total time for this pose estimation. In this paper, a fast DRR generation technique based on GPU parallel computing is introduced. A volume ray-casting algorithm is explained with brief vector operations and a parallelization technique of the algorithm using Compute Unified Device Architecture (CUDA) is discussed. This paper also presents the implementation results and time measurements comparing to those from pure-CPU implementation and open source toolkit.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.488-493
• /
• 2008

This paper represents a dual-mode type transmission technique for a high reliable narrow-band power line communication(PLC) modem, and its design and implementation of a system-on-chip(SoC). The proposed transmission technique is based on a Chirp modulation for the purpose of overcoming time variations of power line channel environments in the narrow-bandwidth of the frequency range of 95-145.5 kHz. The designed modem is fabricated utilizing a mixed 0.18 ${\mu}m$ CMOS technology. Especially, according to the power line channel environments the data transmission rate can be selectively changed into 2.5 kbps and 480 bps. The total hardware complexity of the implemented chip is about 50,000 gates, the power consumption is about 26mW, and the operating frequency is up to 5.12 MHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1071-1073
• /
• 1992

PWM technique is widely applied to the control of AC machines. In this paper a new PWM technique for real-time implementation of variable-frequency sinusoidal PWM is introduced. In the proposed algorithm, a low pass filter is used and the switching state is so determined as to minimize the difference between the reference wave and the output of the filter.