• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1095-1103
• /
• 2014

WBAN has received great attention recently due to its versatile applicability. In this paper, antennas suitable for WBAN communication depending on the locations of mobile devices and the manufacturing of a human equivalent phantom are introduced. The effect of the body on the communication performance is largely dependent on the locations of devices. Specifically, the radiation and return loss characteristics of the antenna are greatly influenced by the characteristics of a medium existing in the near-field of an antenna. Thus, the proper WBAN antenna design is important in establishing a successful communication link between the transceivers. To consider the effect of the body on the antenna performance, the human equivalent phantom is also important factor in the WBAN antenna design and measurement. In introduction, categorization of the WBAN communication channel is introduced and antenna characteristics required for each communication channel are described. In the main subject section, several WBAN antenna design examples along with the implementation of the human equivalent phantom are discussed. In conclusion, the factors, which have to be considered in the design process, and future research are mentioned.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.91-97
• /
• 2004

As the electronic commercial transaction is being transacted by contents which can get an illegal intrusion from the outside, we sincerely require security for them. We must consider a protection countermeasure about intrusion from protection of the passive form to protection intrusion of the active one. So the security is required against hackers illegality intrusion into the contents. As soon as the intrusion happens about the contents, the tools providing the monitor of contents are required to minimize the damage to the systems. Modified web contents detection system in this paper prevents the loss of resources and manpower required through individually monitoring on the web. Also, this paper offers rapid support of security that it analyzes the weakness of contents security of the web environment and the cause of the problem with the leakage of information. So this system has the pur pose of protecting the weakness of contents security and the leakage of information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.719-723
• /
• 2016

Owing to the recent increased interest in wireless communication technology and rapid technology development, a range of applied technologies utilizing them are being released. In addition, at school, by adopting an attendance management system using wireless communication technology, attempts to solve problems caused by attendance books are being made. Representative attendance management systems include those using RFID, Bluetooth and clicker. Although these systems have solved the problem of wasting paper and time due to calling and writing attendance, they have other problems of generating additional expenses of purchasing or renting more equipment. To solve all of these problems, this paper suggests prototype system that can manage attendance by using NFC (Near Field Communication), which most smartphones provide. The attendance management system using NFC consists of two applications; one for professors and the other for students. The system solves problems, such as proxy attendance, loss of lesson time and additional cost by automatically managing attendance information using NFC and TCP/IP technologies.

• Journal of KIISE:Software and Applications
• /
• v.41 no.8
• /
• pp.533-544
• /
• 2014

The hardware-based software has been loaded in almost all industrial fields including the embedded system field. As it is increasingly important to control product quality, the more businesses are expending great quality cost. However, most domestic corporations in Korea are bent on spending more money solving problems caused by poor quality rather than prevention of quality loss cost. Therefore, it's time to improve to use quality prevention cost efficiently. As for this, there has been a growing interest in controlling quantitative quality, but the managing activities for quantitative quality require a high maturity process, belonging to Level 4 and 5. So it is necessary that statistical quality control activities should be fulfilled. This study introduces various measures to build up quality control among the process areas of TMMi Level 5 to help establish the high maturity test processes of statistical quality control.

• Speech Sciences
• /
• v.10 no.3
• /
• pp.241-250
• /
• 2003

In this paper, we implemented the vocoder of variable rate by applying the SOLA-B algorithm to the G.729A to the TMS320C5416 in real-time. This method using the SOLA-B algorithm is that it is reduced the duration of the speech in encoding and is played at the speed of normal by extending the duration of the speech in decoding. But the method applied to the existed G.729A and SOLA-B algorithm is caused the loss of speech quality in G.729A which is not reflected about length variation of speech. Therefore the proposed method is encoded according as it is modified the structure of LSP quantization table about the length of speech is reduced by using the SOLA-B algorithm. The vocoder of variable rate by applying the G.729A and SOLA-B algorithm is represented the maximum complexity of 10.2MIPS about encoder and 2.8MIPS about decoder in 8kbps transmission rate. Also it is evaluated 17.3MIPS about encoder, 9.9MIPS about decoder in 6kbps and 18.5MIPS about encoder, 11.1MIPS about decoder in 4kbps according to the transmission rate. The used memory is about program ROM 9.7kwords, table ROM 4.69kwords, RAM 5.2kwords. The waveform of output is showed by the result of C simulator and Bit Exact. Also, the result of MOS test for evaluation of speech quality of the vocoder of variable rate which is implemented in real-time, it is estimated about 3.68 in 4kbps.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.114-120
• /
• 2006

The basic effects of hydrogen addition for engine performance and emission were investigated in single cylinder research engine. Seven commercial injectors were tested to choose a suitable injector for hydrogen injection prior to its engine implementation. The hydrogen fuel leakage and flow rate were evaluated for each injector and KN3-1(Keihin, CO.) showed the best performance for hydrogen fuel. At the higher excess air ratio(${\lambda}=1.7$, 2.0), the better combustion stability was found with hydrogen addition even though its effect was small at lower excess air ratio (${\lambda}=1.0$, 1.3). Stable operation of the engine was even guaranteed at ${\lambda}=2.0$, if the amount of hydrogen gas was near 15% of total energy. In the lean region, ${\lambda}>1.3$, thermal efficiency was improved slightly while it was not clearly observed at ${\lambda}=1.0$, 1.3. It is considered that, in some cases, high temperature environment due to hydrogen combustion caused further heat loss to surroundings. Except for ${\lambda}=1.0$, with larger amount of hydrogen addition, CO was reduced drastically but it was emitted more at the leaner region. Nitric oxides(NOx) was increased a little more with hydrogen addition at ${\lambda}=1.0$, 1.3. However, at ${\lambda}>1.3$ its relative amount of emission was low. In addition, the amount of NOx was continuously decreased with hydrogen addition, but, at ${\lambda}=2.0$ the amount of NOx was lowered to 1/100 of that of ${\lambda}=1.0$. THC emission was significantly increased as air/fuel ratio was raised to leaner region due to misfire and partial burn.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.1015-1025
• /
• 2017

Bayesian personalized ranking (BPR) is a state-of-the-art recommendation system techniques for implicit feedback data. Unfortunately, there might be a loss of information because the BPR model considers only the binary transformation of implicit feedback that is non-binary data in most cases. We propose a modified BPR method using a level of confidence based on the size or strength of implicit feedback to overcome this limitation. The proposed method is useful because it still has a structure of interpretable models for underlying personalized ranking i.e., personal pairwise preferences as in the BPR and that it is capable to reflect a numerical size or the strength of implicit feedback. We propose a computation algorithm based on stochastic gradient descent for the numerical implementation of our proposal. Furthermore, we also show the usefulness of our proposed method compared to ordinary BPR via an analysis of steam video games data.

• Food Science of Animal Resources
• /
• v.32 no.6
• /
• pp.740-748
• /
• 2012

This research was conducted to develop a new approach to Chuncheon Dakgalbi processing by various chicken materials, seasoning (conventional sauce/CS and new approach of seasoning by adding the curing mixture/CSA), and cooking methods. Three chicken breeds (broiler, old broiler and spent laying hen) were divided into five experimental groups: broiler-CS, old broiler-CS, old broiler-CSA, spent laying hen-CS, and spent laying hen-CSA. All samples were stored at $5^{\circ}C$ for 12 d. For sensory evaluation, all samples were cooked with conventional cooking (pan grilling) or high temperature and pressure cooking (at $121^{\circ}C$ with pressure 1.5 $Kg_f/cm^2$ for 30 min). The chicken material analysis showed that the moisture and crude protein content, cooking loss and shear-force of the old broiler and spent laying hen were higher (p<0.05) than those of the current broiler, but the crude ash, crude lipid and WHC were lower (p<0.05). The addition of CSA increased the pH value and reduced the lipid oxidation at the end of storage regardless of chicken breeds (p<0.05). The high temperature and pressure cooking method seemed to increase the taste, smell and overall-acceptability scores of the old broiler and spent laying hen Chuncheon Dakgalbi regardless of the implementation of new approach of seasoning (CSA). In conclusion, an old broiler and spent laying hen can be used as material of Chuncheon Dakgalbi by the application of a new approach of seasoning and cooking method.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.129-137
• /
• 2017

PURPOSES : The purpose of this study is to develop bridge deck concrete materials based on ordinary Portland cement concrete, and to evaluate the applicability of the developed materials through material properties tests. METHODS : For field implementation, raw material (cement, fine aggregate, and coarse aggregate) properties, fresh concrete properties (slump and air content), strength (compressive, flexural and bond strength) gain, and durability (freeze-thaw resistance, scaling resistance, and rapid chloride penetrating resistance) performance were evaluated in the laboratory. RESULTS : For the selected binder content of $410kg/m^3$, W/B = 0.42, and S/a = 0.48, the following material performance results were obtained. Considering the capacity of the deck finisher, a minimum slump of 150 mm was required. At least 6 % of air content was obtained to resist freeze-thaw damage. In terms of strength, 51.28 MPa of compressive strength, 7.41 MPa of flexural strength, and 2.56 MPa of bond strength at 28 days after construction were obtained. A total of 94.9 % of the relative dynamic modulus of elasticity after 300 cycles of freeze-thaw resistance testing and $0.0056kg/m^2$ of weight loss in a scaling resistance test were measured. However, in a chloride ion penetration resistance test, the result of 3,356 Coulomb, which exceeds the threshold value of the standard specification (1000 Coulomb at 56 days) was observed. CONCLUSIONS : Instead of using high-performance modified bridge deck materials such as latex or silica fume, we developed an optimum mix design based on ordinary Portland cement concrete. A test construction was carried out at ramp bridge B (bridge length = 111 m) in Gim Jai City. Immediately after the concrete was poured, the curing compound was applied, and then wet mat curing was applied for 28 days. Considering the fact that cracks did not occur during the monitoring period, the applicability of the developed material is considered to be high.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.