• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.71-82
• /
• 2020

Traffic accidents due to excessive speed frequently occur in places where traffic signal controllers are installed, places where sharp curves exist, or places where the traffic signal cycle does not match the current time. These traffic accidents cause economic loss due to the destruction of road facilities and structures, and cause a big problem of increasing the number of traffic accident deaths. When a traffic accident occurs, leaving a tire mark before or after a car crash, pre-collision speed of the car is calculated using the law of conservation of momentum or the skid mark formula. In the skip skid mark generated in ABS brake vehicles and the combshaped yaw mark generated by tire trace caused by lateral sliding, there is a difference of 30-40% in the reliability of the vehicle speed calculated by the smite mark. In this paper, we propose an algorithm that can improve the calculation reliability in vehicle speed by using skid marks in order to compensate for this problem. In addition, we present an intelligent speed calculation algorithm for traffic safety and a computer simulation in order to prevent traffic accidents by estimating the speed of a vehicle, using Skid marks, Yaw marks, and ABS brake characteristics and fuzzy rules.

• 대한전자공학회논문지TC
• /
• 제39권12호
• /
• pp.559-565
• /
• 2002

현재 RFIC를 위해 실리콘 기판상에 구현되는 인덕터의 Q 값은 12 이하로 알려져있기 때문에, 고성능 회로설계를 위해서는 더욱 높은 Q 값을 갖는 인덕터의 구현이 필수적이다. 본 논문에서는 본드와이어를 이용하여 높은 Q 값을 가지는 두 개의 인덕터를 제안하였고, 동일한 인덕터에 PGS를 적용하여 총 4가지 형태의 인덕터를 구현하였다. 제안된 본드와이어 인덕터는 일반적인 금속선로보다 넓은 단면적 때문에 상대적으로 작은 도체 손실을 갖고, 인덕터의 상당부분이 공기 중에 위치하므로 기생 캐패시턴스 성분을 줄일 수 있다. 해석 및 측정결과 1.5 GHz 에서 기존의 나선형 인덕터보다 상당히 개선된 15이상의 Q 값을 가짐을 확인하였다. 또한 자동 본딩 머신을 사용하여 구현하기 때문에, 동일한 형태의 인덕터를 반복적으로 쉽게 만들 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.147-150
• /
• 2005

Low actuation voltage and no contact stiction are the important factors to apply MEMS RF switches to mobile devices. Conventional electrostatic MEMS RF switches require several tens of voltages for actuation. In this paper we propose PAS MEMS RF switch which adopt PZT actuators and seesaw cantilevers to meet the above requirements. The fundamental structures of PAS MEMS switch were designed, optimized, and fabricated. Through the developed processes PAS SPDT MEMS RF switches were successfully fabricated on 4" wafers and they showed good electrical properties. The driving voltage was less than 5 volts. And the insertion loss was -0.5dB and the isolation was 35dB at 5GHz. The switching speed was about 5kHz. So these MEMS RF switches can be applicable to mobile communication devices or wireless multi-media devices at lower than 6GHz.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.473-494
• /
• 2020

To provide a guaranteed Quality of Service (QoS) to real-time traffic in High-Speed Downlink Packet Access (HSDPA) core network, we proposed an enhanced mechanism. For an enhanced QoS, a Class-Based Low Latency Fair Queueing (CBLLFQ) packet scheduling algorithm is introduced in this work. Packet classification, metering, queuing, and scheduling using differentiated services (DiffServ) environment was the points in focus. To classify different types of real-time voice and multimedia traffic, the QoS provisioning mechanisms use different DiffServ code points (DSCP).The proposed algorithm is based on traffic classes which efficiently require the guarantee of services and specified level of fairness. In CBLLFQ, a mapping criterion and an efficient queuing mechanism for voice, video and other traffic in separate queues are used. It is proved, that the algorithm enhances the throughput and fairness along with a reduction in the delay and packet loss factors for smooth and worst traffic conditions. The results calculated through simulation show that the proposed calculations meet the QoS prerequisites efficiently.

• 한국정보통신학회논문지
• /
• 제22권2호
• /
• pp.369-374
• /
• 2018

Line Code는 데이터 전송을 위해 사용하는 Code로 송수신기 간 데이터의 손실을 방지하기 위해 사용되는 데이터의 부호방식이다. Line Code의 종류는 B3ZS, HDB3, B8ZS 등 다양한 방식이 있으며 우리나라 군 전술통신망에서는 HDB3 Code를 사용하고 있다. 본 논문에서는 군 전술통신망에서 사용되는 HDB3 Codec을 로직으로 구현하여 단종에 대한 위험요소를 제거하고, 개발기간의 단축과 신뢰성 보장이 가능하도록 한다. 또한 최소한의 로직을 사용하여 HDB3 Codec 구현함으로서 FPGA를 사용하여 개발이 가능함을 확인하고 시뮬레이션을 통해 구현된 HDB3 Codec과 상용의 HDB3 Codec IC의 비교를 통해 하여 성능을 입증한다.

• 정보기술과데이타베이스저널
• /
• 제6권1호
• /
• pp.1-13
• /
• 1999

The modeling components in the object-oriented paradigm are based on the object, not the structured function or procedure. That is, in the past, when one wanted to solve problems, he would describe the solution procedure. However, the object-oriented paradigm includes the concepts that solve problems through interaction between objects. The object-oriented model is constructed by describing the relationship between object to represent the real world. As in object-oriented model the relationships between objects increase, the control of objects caused by their insertions, deletions, and modifications comes to be very complex and difficult. Because the loss of the referential integrity happens and the object reusability is reduced. For these reasons, the necessity of the control of objects and the visualization of the relationships between them is required. In order that we design a database necessary to implement Object Browser that has functionalities to visualize Java objects and to perform the query processing in Java object modeling, in this paper we show the processes for EER modeling on Java object and its transformation into relational database schema. In addition we implement Java Object Parser that parses Java object and inserts the parsed results into the implemented database.

• 한국전자파학회지:전자파기술
• /
• 제3권1호
• /
• pp.3-10
• /
• 1992

트윈슬랩 모델 이론을 이용하여 자속밀도 제어형 페라이트 도파관 변위기를 설계 실험하였다. 설계 . 제작한 변위기의 측정 결과, 변위차는 이론적 계산치에 비해 8-9% 삭제 나타났다. Trans Tech사의 TT73-2200 페라이트플 이용한 변위기의 삽입손실과 VSWR은 통과대역 내에서 각각 0.45dB와 1.25이하로 만족할 만한 수준이었고, 임피던스 정합 변환기를 2단으로 사용한 경우에는 큰 삽입손실의 증가없이 대역폭을 현저히 증가시킬 수 있었다. TT73- 2900 페라이트플 사용한 변위기는 표준도파만 보다 높이가 낯아진 도파관플 사용하여 고차모드 발생을 억제시킴으로써 좋은 효과륜 얻을 수 있었다.

• 한국건축시공학회지
• /
• 제5권4호
• /
• pp.99-106
• /
• 2005

With labor shortage and high-wage, the construction cost is rising and the construction-business is dull, demanding the construction environment of Korea to raise profitability through major cost savings and rationalization of construction management. Therefore, in this study, to improve many problems found in calculating rebar quantity for capital expenditure programming which is considered the beginning stage of rebar work. and to improve problems such as no grasping of rebar loss due to lack of systematic management in order/purchase stage and construction management stage, a rebar information-management-system was found and preyed. The relation database was designed for the rebar information management system by analyzing work process of a rebar manufacturing plant, as the rebar information that is necessary in a rebar manufacturing plant if similar to that of a purchasing department of general construction company. The Proposed rebar information management system was implemented in two large rebar production plants. The implementation of the proposed system showed that the system increased work efficiency, reduced the management manpower, and improved the project-integrated management

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.692-710
• /
• 2013

Conventional interference alignment (IA) for a MIMO interference channel (IFC) requires global and perfect channel state information at transmitter (CSIT) to achieve the optimal degrees of freedom (DoF), which prohibits practical implementation. In order to alleviate the global CSIT requirement caused by the coupled relation among all of IA equations, we propose an IA scheme with a single feedback link of each receiver in a limited feedback environment for a three-user MIMO IFC. The main feature of the proposed scheme is that one of users takes out a fraction of its maximum number of data streams to decouple IA equations for three-user MIMO IFC, which results in a single link feedback structure at each receiver. While for the conventional IA each receiver has to feed back to all transmitters for transmitting the maximum number of data streams. With the assumption of a random codebook, we analyze the upper bound of the average throughput loss caused by quantized channel knowledge as a function of feedback bits. Analytic results show that the proposed scheme outperforms the conventional IA scheme in term of the feedback overhead and the sum rate as well.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.35-43
• /
• 2003

본 논문에서는 새로 제안된 절점 활성화 기법을 실제 구현하기 위한 효율적 계산법을 소개하고 각종 수치실험을 수행한다. 포아송 방정식, 2차원 탄성문제, 3차원 탄성문제에 대하여 다양하게 수행된 수치실험을 통하여 절점활성화 이론의 타당성, 수렴성, 및 효율성을 고찰한다. 수렴성, 패치 테스트 등이 포함된 각종 수치실험 결과로부터 절점활성화 기법을 이용하면 정확도의 큰 손실 없이도 많은 수의 유한요소 절점 중 관심이 있는 일부 절점만을 선택, 활성화시켜 이들만을 미지수로 이용하여 효율적으로 문제를 해석할 수 있음을 입증한다.