• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.427-432
• /
• 2017

This study describes the design and implementation of SHF band Downconverter Digital Satellite Communication. The SHF band Downconverter unit consists of PLDRO and Frequency converter. In Frequency converter, microstrip BPF and LPF designed through the pre EM simulation are implemented to minimize the unwanted spurious in Frequency converter. Through the pre-simulation analysis of space environment, the possibility of and minimized about the malfunction of equipment and we designed a reliable SHF band Downconverter through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of SHF band Downconverter after production.

• Journal of dental hygiene science
• /
• v.17 no.1
• /
• pp.30-37
• /
• 2017

The purpose of this study was to reveal analyze the relationship between status of participation in an oral health care program and oral health outcomes among patients in Korea, and to evaluate the results to provide evidence regarding the feasibility of widespread implementation of the program. Patients were designated as either cooperative or non-cooperative with the oral health care program and were assigned to each group accordingly. Modified dental hygiene process (M-DHP) of the oral healthcare program was modified to form the dental hygiene process. The study included 48 patients at a dental clinic in Busan, Korea. Questionnaires were used to collect information on oral health behavior (OHB), clinical examination was used to record bleeding on probing (BOP) and O'Leary index, and phase microscopy was used to identify microorganisms. Differences between groups were evaluated using repeated measures ANOVA. Our results showed that the group cooperative with the oral health care program showed greater improvement in OHB, BOP, and O'Leary index than the non-cooperative group. Second, patient satisfaction with the M-DHP was very high, particularly for content and the friendly nature of the staff. The cooperative group showed greater improvement in oral health than the non-cooperative group for all metrics. Our results suggest that this low-coste program, if implemented, would be actively accepted and utilized in dental clinics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2139-2144
• /
• 2013

This paper has analyzed the possibility about implementation of the low-cost, high-efficiency tracking antenna using flat panel antenna. Tracking antenna is consisted of four flat-antenna, comparators, tracking receiver, controller. We analyzed input signal of antenna array about the magnitude and phase of radio wave. In addition, We suggested the available tracking range through the analysis of output signal. We have minimized the error rate that happened on two path through design two path of the azimuth and elevation. Analysis results has a tracking range of ${\pm}3$ degrees, it is possible to implement.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.66-71
• /
• 2001

This paper Introduces an implementation of MPEG-2 AAC codec system for digital audio broadcasting. This system consists of the encoder and the decoder. This system includes MPEG-2 system multiplexing and demultiplexing modules for Interfacing to the ETRI-DAB system. Four DSPs are adopted for the encoder and three DSPs for 7he decoder. Each DSP Processes system control. 1/0 control, audio signal processing. multiplexing and demultiplexing. This Paper also discusses some near future estimations relaxed to the DAB system and it\`s services. Currently a stereo audio codec is available but multi-channel audio codec and MPEG-4 audio cosec wall be also Implemented.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1087-1094
• /
• 2004

Normally, formalization and standardization are followed while doing any system analysis and design. But, in actual system development, products can't be written using the automated tool for all products due to their own characteristics. That results the inconsistency among development products and various kinds of problem can occur in the products. In this paper, we present a technique that supports consistency among products of analysis and design phase developed according to object oriented method. And, this paper also presents the implementation tool.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.522-532
• /
• 2018

The cascaded H Bridge (CHB) multilevel inverter (MLI) is popular among the classical MLI topologies due to its modularity and reliability. Although space vector modulation (SVM) is the most suitable modulation scheme for MLIs, it has not been used widely in industry due to the higher complexity involved in its implementation. In this paper, a simple and novel generalized SVM algorithm is proposed, which has both reduced time and space complexity. The proposed SVM involves the generalization of both the duty cycle calculation and switching sequence generation for any n-level inverter. In order to generate the gate pulses for an inverter, a generalized switch matrix (SM) for the CHB inverter is also introduced, which further simplifies the algorithm. The algorithm is tested and verified for three-phase, three-level and five-level CHB inverters in simulations and hardware implementation. A comparison of the proposed method with existing SVM schemes shows the superiority of the proposed scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.283-290
• /
• 2004

In this paper, a low-power structure for 512 tap FIR filter in MPEG audio algorithm is proposed. By using CSD(Canonic Signed Digit) form filter coefficients and maximum sharing of input signal sample, it is shown that the number of adders of proposed structure can be minimized. To minimize the number of adders, the proposed structure utilizes the 4 steps of sharing, i.e., common input sharing, linear phase symmetric filter coefficient sharing, block sharing for common input, and common sub-expression sharing. Through Verilog-HDL coding, it is shown that reduction rates in the implementation area and relative power consumption of the proposed structure are 60.3% and 93.9% respectively, comparison to those of the conventional multiplier structure.

• Korea journal of population studies
• /
• v.9 no.1
• /
• pp.32-40
• /
• 1986

The purpose of the paper is to examine the nature of population distribution during the past 25 years; to evaluate effect of population redistribution policies which have been adopted by the government; and to suggest desirable future policy directions. The distinctive features of population distribution during the period of 196O~85 can be summarized as progress of rapid urbanization, decrease of absolute number of rural population and heavy concentration of population in the Seoul metropolitan area which have resulted in population maldistribution among regions. The problem of population concentration in the selected one or two large urban centers was first recognized by the government as early as in 1964. Since then numerous policy measures have been adopted to reduce the population concentration into the Seoul metropolitan area and thus to guide a sound population redistribution among regions. The overall assessment of various policies on population redistribution, however, revealed that the effect of the policy efforts has not been great as they originally anticipated. Various reasons can be cited for the failure of the past policies. Among them the followings were frequently mentioned; lack of integration among policy measures; weak linkage between relocation and accommodation; and non-existence of single authority for overall implementation of the polices. Based on the past experiences the followings are suggested in pursuing future policies. First, the short-term objective or target should be clearly defined. Second, policy measures have to be designed to go with rather than against market forces. Third, indirect incentives or aids are more effective than direct controls or regulations. Fourth, local participation has to be secured in every phase of policy formulation and implementation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.817-826
• /
• 2001

In this paper, we implemented QPSK(Quadrature Phase-Shift Keying) modem which is widely used for communication systems, using a general Digital Signal Processor(DSP), TM320C31. Up to now, almost all of communication systems consist of hardware. However, the implemented system herein is composed of software and hardware part. Software part includes the modulation process, before passing D/A(Digital-to-Analog Converter) and the demodulation process, after passing A/D(Analog-to-Digital Converter) in IF(Intermediate Frequency) node. Hardware part is related to input, output and process of signal. To demonstrate the successful implementation of modem, the output results obtained from DSP processor are compared with the simulated result on the personal computer.