• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.55-59
• /
• 2014

An implantable CPW fed monopole antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate (${\Box}_r=9.8$ and thickness=0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters, such as return loss, E-Plane, H-Plane, are measured and analyzed, using the method of moments. The proposed antenna has substantial merits over other implanted antennas, like low profile, miniaturization, lower return loss, and better impedance matching and high gain.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.250-253
• /
• 2015

A novel implantable CPW fed Apollian shaped antenna embedded into human tissue is proposed for ISM band biomedical applications. The proposed antenna is made compatible for implantation by embedding it in an alumina ceramic substrate(ε_r=9.8 and thickness= 0.65 mm). The proposed antenna covers the ISM band of 2.45 GHz. The radiation parameters such as return loss, xy-plane, xz-plane, and yz-plane etc., are measured and analyzed using the agilent vector network analyzer. The proposed antenna has substantial advantages, including low profile, miniaturization ability, lower return loss, better impedance matching, and high gain over conventional implanted antennas.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.383-386
• /
• 2017

In this study, we introduce a triple-band flexible implantable antenna that is tuned by using a ground slot in three specific bands, namely Medical Implanted Communication Service (MICS: 402-405 MHz) for telemetry, the midfield band (lower gigahertz: 1.45-1.6 GHz) for Wireless Power Transfer (WPT), and the Industrial, Scientific and Medical band (ISM: 2.4-2.45 GHz) for power conservation. This antenna is wrapped inside a printed 3D capsule prototype to show its applicability in different implantable or ingestible devices. The telemetry performance of the proposed antenna was simulated and measured by using a porcine heart. From the simulation and measurement, we found that use of a ground slot in the implantable antenna can improve the antenna performance and can also reduce the Specific Absorption Rate (SAR).

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.171-175
• /
• 2013

본 논문에서 안테나는 유전율 4.4 두께는 0.6mm안 FR-4 기판위에 L형 슬롯을 포함한 마이크로스트립 패치를 삽입하였으며, LTE용 마이크로스트립 패치 안테나를 설계하였다. 제안된 안테나는 기존의 마이크로스트립 안테나의 $180{\times}180$에 비해 $46{\times}36$으로 소형, 경량화 하였으며 송신용 안테로서 사용이 가능한 전방향성 특성을 가진 전파가 가능한 방사패턴을 보였으며 입력대비 반사손실이 -10dB (VSWR 2:1)이하로 공진 주파수 대역에서 통신을 가능케 하였다.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.345-349
• /
• 1996

The wetting property of polymer surfaces is very important for practical applications. Plasma source ion implantation technique was used to improve the wetting properties of polymer surfaces. Poly(ethylene terephtalate) and other polymer sheets were mounted on the target stage and an RF plasma was generated by means of an antenna located inside the vacuum chamber. High voltage pulses of up to -10kV, 10 $\mu$sec, and up to 1 kHz were applied to the stage. The samples were implanted for 5 minutes with using Ar, $N_2,O_2,CH_4,CF_4$ and their mixture as source gases. A contact angle meter was used to measure the water contact angles of the implanted samples and of the samples stored in ambient conditions after implantation. The modified surfaces were analysed with Time-Of-Flight Mass Spectrometer (TOF-SIMS) and Auger Electron Spectroscopy (AES). The oxygen-implanted samples showed extremely low water contact angles of $3^{\circ}C$ compared to $79^{\circ}C$ of unimplanted ones. Furthermore, the modified surfaces were relatively stable with respect to aging in ambient conditions, which is one of the major concerns of the other surface treatment techniques. From TOF-SIMS analysis it was found that oxygen-containing functional groups had been formed on the implanted surfaces. On the other hand, the $CF_4$-implanted samples turned out to be more hydro-phobic than unimplanted ones, giving water contact angles exceeding $100^{\circ}C$ . The experiment showed that plasma source ion implantation is a very promising technique for polymer surface modification especially for large area treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.180-180
• /
• 2000

Plasma source ion implantation is a new doping technique for the formation of shallow junction with the merits of high dose rate, low-cost and minimal wafer charging damage. In plasma source ion implantation process, the wafer is placed directly in the plasma of the appropriate dopant ions. Negative pulse bias is applied to the wafer, causing the dopant ions to be accelerated toward the wafer and implanted below the surface. In this work, inductively couples plasma was generated by anodized Al antenna that was located inside the vacuum chamber. The outside wall of Al chamber was surrounded by Nd-Fe-B permanent magnets to confine the plasma and to enhance the uniformity. Before implantation, the wafer was pre-sputtered using DC bias of 300B in Ar plasma in order to eliminate the native oxide. After cleaning, B2H6 (5%)/H2 plasma and negative pulse bias of -1kV to 5 kV were used to form shallow p+/n junction at the boron dose of 1$\times$1015 to 5$\times$1016 #/cm2. The as-implanted samples were annealed at 90$0^{\circ}C$, 95$0^{\circ}C$ and 100$0^{\circ}C$during various annealing time with rapid thermal process. After annealing, the sheet resistance and the junction depth were measured with four point probe and secondary ion mass spectroscopy, respectively. The doping uniformity was also investigated. In addition, the electrical characteristics were measured for Schottky diode with a current-voltage meter.

• 센서학회지
• /
• 제12권6호
• /
• pp.249-257
• /
• 2003

환자의 체내에 삽입하여 여러 가지 생체정보를 무선으로 전송하는 형태의 텔레메트리 기술은 환자들의 불편함을 해소하고 기존의 진단 한계를 극복하는데 큰 기여를 할 것으로 기대되고 있다. 체내에서 생체신호를 외부의 전송하는 시스템의 경우, 정확한 질병지점을 판단하기 위해서는 체내의 텔레메트리 모듈의 위치를 체외에서 정착하게 파악할 수 있는 기술이 필수적이다. 본 논문에서는 8개의 안테나를 고정된 위치에 두고, 비선형 연립방정식의 해석을 통하여 체내에 삽입된 송신모듈의 위치를 결정하는 방법을 제안하고 해석하였다.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.599-604
• /
• 2004

본 논문에서는 폴리머/ 금속 다층 공정 기술 (polymer/metal multi layer processing techniques)을 이용한 실시간 혈압 감지를 위한 유연한 생체 삽입형 센서를 새로이 제안한다. 제안되는 방식의 센서는 기계적으로 유연하기 때문에 혈관의 외벽에 대한 침습성을 감소시켜 부착할 수 있다. 즉, 혈압 측정을 위해 센서를 혈관 내에 설치하던 기존의 방법들에 비해서 혈관 자체에 상처를 주지 않고 혈압의 상대적인 변화를 지속적으로 감지할 수 있다. 성인에게 발생하는 급사의 주된 원인은 협심증, 심근 경색과 같은 혈관 관련 질환이다. 플라크 (plaque)의 생성 등과 관계된 순환계 관련 질환들은 지속적인 혈압 감지를 통해서 예방할 수 있으며 발병 초기에 치료할 수 있다. 본 연구에서 제안하는 혈압감지 방법의 과정은 다음과 같다. 우선, 집적된 센서를 혈관 외벽에 부착한다. 둘째, 실장된 센서가 혈관의 기계적인 수축과 확장을 인식한다. 마지막으로, 센서에 의해 인식된 혈압의 변화를 원격 감지 방법을 통해서 외부 안테나에서 감지하게 된다. 센서 시스템에는 어떠한 능동 소자도 존재하지 않기 때문에 에너지와 혈압 변화 정보는 LC 공진기와 외부 안테나 사이에 발생하는 상호 인덕턴스 원리에 의해서 전달되게 된다. 이러한 측정 원리의 가능성을 확인하기 위해서 실리콘 고무관과 혈액을 이용하여 시험관 실험 (In vitro test)을 진행하였다. 우선, 혈액으로 채운 실리콘 고무관에 센서를 감은 후 피스톤으로 압력을 가하였다. 그리고 이를 통해 가해진 압력 변화에 따른 공진 주파수의 변화를 측정하였다. 가해진 압력이 0부터 213.3 KPa까지 변화하는 동안 2.4 MHz의 공진 주파수가 변했다. 그러므로 생체 삽입형 혈압 센서의 감도는 11.25 KHz/KPa이다.