• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• Journal of Periodontal and Implant Science
• /
• v.31 no.2
• /
• pp.371-388
• /
• 2001

A novel glucanhydrolase(DXAMase) from a mutant of Lipomyces starkeyi(KSM 22) has been shown effective in hydrolysis of mutan, reduction of mutan formation by Streptococcus mutans and removal pre-formed sucrose-dependentadherent microbial film and DXAMase has been strongly bound to hydroxyapatitie. These in vitro properties of Lipomyces starkeyi DXAMase are desirable for its application as a dental plaque control agent. This study was performed to determine the adjunctive oral hygiene benefits and safety of dextranase(Lipomyces starkeyi KSM 22 DXAMase)-containing mouthwash when used alongside normal tooth-brushing. This 6-month clinical trial was placebo-controlled double-blind design evaluating 1U/ml dextranase mouthwash and 0.12% chlorhexidine mouthwash. A total 39 systemically healthy subjects, who had moderate levels of plaque and gingivitis were included. At baseline, 1, 3 and 6 months, subjects were scored for plaque accumulation(Turesky modification of Quingley-Hein's plaque index), gingivitis status($L\ddot{o}e$ and Silness gingival index), and tooth stain(Area and severity index system by Lang et al). Additionally, oral mucosal examinations were performed and subjects questioned for adverse symptoms. Two weeks after pre-experiment examinations and a professional prophylaxis, the subjects provided with allocated mousewash and instructed to use 20-ml volumes for 30s twice daily after toothbrushing. All the groups showed significant increase in plaque accumulation since 1 month of experiment. During 6 months' period, the Dextranase mouthwash group showed the least increase in plaque accumulation, compared to the Chlorhexidine mouthwash and placebo groups. As for gingival inflammation, all the groups showed significant increase during 6 months of experiment. The Experimental group(Dextranase mouthwash) also showed the least increase in gingival index score, compared to the Positive control(Chlorhexidine mouthwash)as well as the Negative control(placebo)groups. Whereas the tooth stain was increased significantly in the Positive control group, compared to the baseline score and the Negative controlgroup since 3 months of mouthrinsing. It was significantly increased after 6 months in the Experimental group, still less severe than the Positive control group. As for the oral side effect, the Experimental group showed less tongue accumulation, bad taste, compared to the Positive control group. From these results, mouthrinsing with Lipomyces starkeyi KSM 22 dextranase provided adjunctive benefits to toothbrushing, comparable to 0.12% chlorhexidine mouthwash in inhibition of plaque accumulation and gingival inflammation and local side effects were if anything less frequent and less intense than chlorhexidine, with long-term use of the mouthwash. All data had provided positive evidence for Lipomyces starkeyi KSM 22 dextranase as an antiplaque agent and suggested that further development of dextranase formulations for plaque control are warranted.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.134-135
• /
• 2003

The dental implant materials required good mechanical properties, such as fatigue strength, combined with a high resistance to corrosion. For increasing fatigue resistance and delaying onset of stress corrosion cracking, shot peening has been used for > 50 years to extend service life of metal components. However, there is no information on the electrochemical behavior of shot peened and hydroxyapatite(HA) coated Ti-6Al-4V alloys. To increase fatigue strength, good corrosion resistance, and biocompatibility, the electrochemical characteristics of Ti/TiN/HA coated and shot peened Ti-6Al-4V alloys by electron beam physical vapor deposition(EB-PVD) have been researched by various electrochemical method in 0.9%NaCl. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. The produced materials were quenched at 1000$^{\circ}C$ under high purity dried Ar atmosphere and were hold at 500$^{\circ}C$ for 2 hrs to achieve the fatigue strength(1140㎫) of materials. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. Shot peening(SP) and sand blasting treatment was carried out for 1, 5, and 10min. On the surface of Ti-6Al-4V alloys using the steel balls of 0.5mm and alumina sand of 40$\mu\textrm{m}$ size. Ti/TiN/HA multilayer coatings were carried out by using electron-beam deposition method(EB-PVD) as shown Fig. 1. Bulk Ti, powder TiN and hydroxyapatite were used as the source of the deposition materials. Electrons were accelerated by high voltage of 4.2kV with 80 - 120mA on the deposition materials at 350$^{\circ}C$ in 2.0 X 10-6 torr vacuum. Ti/TiN/HA multilayer coated surfaces and layers were investigated by SEM and XRD. A saturated calomel electrode as a reference electrode, and high density carbon electrode as a counter electrode, were set according to ASTM GS-87. The potentials were controlled at a scan rate of 100 mV/min. by a potentiostat (EG&G Co.273A) connected to a computer system. Electrochemical tests were used to investigate the electrochemical characteristics of Ti/TiN/HA coated and shot peened materials in 0.9% NaCl solution at 36.5$^{\circ}C$. After each electrochemical measurement, the corrosion surface of each sample was investigated by SEM.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.167-172
• /
• 2009

Purpose: We wanted to evaluate the results of treating acromioclavicular joint dislocation using an AO hook plate. Materials and Methods: Between February 2008 and September 2009, 10 patients underwent implant removal after surgical treatment of acromioclavicular joint dislocation using a AO hook plate. The Constant-Murley scoring system was administered postoperatively for evaluating the clinical results, and simple X-ray was taken for evaluating the state of reduction. Results: All cases showed satisfactory results on the clinical and radiological study. The mean Constant-Murley score at follow-up was 90.5 (range: 84~95). Three patients had some degree of discomfort with the hook plate, but these symptoms were relieved on removal of the plate. The radiological evaluation showed restoration of the vertical displacement of the clavicle in all the patients. No complications occurred such as infection, plate failure or redislocation after removal of the plate. Conclusion: The short term follow-up results of treating acromioclvicular joint dislocation using an AO hook plate were satisfactory both clinically and radiologically.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.523-526
• /
• 2014

Three dogs were admitted for repair of bone fracture. Case 1 (Maltese, 1.8 kg, intact female, 5-month-old) and case 2 (poodle, 3.0 kg, intact female, 6-month-old) had non-weight bearing lameness in the left pelvic limb, and case 3 (mixed, 3.3 kg, intact female, age unknown) had non-weight-bearing lameness in the left thoracic limb. On orthopedic examination, there was pain, crepitus, palpable instability and substantial soft tissue swelling on the affected side. No neurological deficits were identified. Radiographs revealed left proximal metaphyseal tibial and fibular fractures in cases 1 and 2, and left proximal metaphyseal radial and ulnar fractures in case 3. All cases had closed long-bone fractures with short juxta-articular fracture segments. Under fluoroscopic guidance, proper placement of the ring fixation elements was confirmed during surgery. Two or three rings were used to stabilize fractures with traditional circular external skeletal fixators (CESF). Postoperative radiographs showed acceptable alignment and apposition of the previously identified fracture. Time to radiographic union ranged from 5 to 14 weeks and there were no signs of implant failure or pin tract infection. Functional outcomes were excellent in all cases. CESF can be successfully used to reduce short juxta-articular fractures in which bone plates or external skeletal fixation cannot be applied.

• Journal of Periodontal and Implant Science
• /
• v.49 no.4
• /
• pp.215-227
• /
• 2019

Purpose: To histologically characterize periodontal healing at 8 weeks in surgically created dehiscence defects in beagle dogs that received a collagen matrix with periodontal ligament (PDL) progenitor cells. Methods: The bilateral maxillary premolars and first molars in 6 animals were used. Standardized experimental dehiscence defects were made on the buccal side of 3 premolars, and primary culturing of PDL progenitor cells was performed on the molars. Collagen matrix was used as a scaffold and a delivery system for PDL progenitor cells. The experimental sites were grafted with collagen matrix (COL), PDL progenitor cells with collagen matrix (COL/CELL), or left without any material (CTL). Histologic and histomorphometric analyses were performed after 8 weeks. Results: The defect height from the cementoenamel junction to the most apical point of cementum removal did not significantly differ across the CTL, COL, and COL/CELL groups, at $4.57{\pm}0.28$, $4.56{\pm}0.41$, and $4.64{\pm}0.27mm$ (mean ${\pm}$ standard deviation), respectively; the corresponding values for epithelial adhesion were $1.41{\pm}0.51$, $0.85{\pm}0.29$, and $0.30{\pm}0.41mm$ (P<0.05), the heights of new bone regeneration were $1.32{\pm}0.44$, $1.65{\pm}0.52$, and $1.93{\pm}0.61mm$ (P<0.05), and the cementum regeneration values were $1.15{\pm}0.42$, $1.81{\pm}0.46$, and $2.57{\pm}0.56mm$ (P<0.05). There was significantly more new bone formation in the COL/CELL group than in the CTL group, and new cementum length was also significantly higher in the COL/CELL group. However, there were no significant differences in the width of new cementum among the groups. Conclusions: PDL progenitor cells carried by a synthetic collagen matrix may enhance periodontal regeneration, including cementum and new bone formation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.3
• /
• pp.142-147
• /
• 2023

Objectives: As medical history before surgery is often based on patient reporting, there is the possibility that patients intentionally hide underlying diseases or that dentists cannot recognize abnormal health states. Therefore, more professional and reliable treatment processes are needed under the Korean dental specialist system. The purpose of this study was to elucidate the necessity of a preoperative blood testing routine prior to office-based surgery under local anesthesia. Patients and Methods: Preoperative blood lab data for 5,022 patients from January 2018 to December 2019 were assembled. Study participants were those who underwent extraction or implant surgery under local anesthesia at Seoul National University Dental Hospital. Preoperative blood tests included complete blood count (CBC), blood chemistry, serum electrolyte, serology, and blood coagulation data. Values outside of the normal range were considered an "abnormality," and the percentage of abnormalities among the total number of patients was calculated. Patients were divided into two groups based on the presence of underlying disease. The rates of abnormalities in the blood tests were compared between groups. Chi-square tests were performed to compare data from the two groups, and P<0.05 was considered statistically significant. Results: The percentages of males and females in the study were 48.0% and 52.0%, respectively. Of all patients, 17.0% (Group B) reported known systemic disease, while 83.0% (Group A) reported no specific medical history. There were significant differences between Groups A and B in CBC, coagulation panel, electrolytes, and chemistry panel (P<0.05). In Group A, the results of blood tests that required a change in procedure were identified even though the proportion was very small. Conclusion: Preoperative blood tests for office-based surgery can detect underlying medical conditions that are difficult to identify from patient history alone and can prevent unexpected sequelae. In addition, such tests can result in a more professional treatment process and build patient confidence in the dentist.

• Journal of Chest Surgery
• /
• v.42 no.1
• /
• pp.28-33
• /
• 2009

Background: Functional tricuspid regurgitation (TR) greater than or equal to a mild grade requires tricuspid valvuloplasty, and tricuspid valvuloplasty with ring annuloplasty has shown good outcomes. We report here on our early experience with the Edwards $MC^3$ annuloplasty system (Edwards LifeSciences, Irvine, CA). Material and Method: From November 2004 to July 2006, 72 patients with tricuspid annular dilatation and TR underwent tricuspid valvuloplasty with using the Edwards $MC^3$ annuloplasty ring. Sixty-eight patients were operated on via median sternotomy and four patients were operated on using robotic assisted minimal invasive thoracotomy. The patient population included 21 males and 51 females and their mean age was $53.9{\pm}12.3$. The mean grade of TR, as assessed by the preoperative echocardiography, was $2.2{\pm}1.0$. The mean NYHA functional class was $3.1{\pm}0.8$. The mean left ventricular ejection fraction was $57.0{\pm}9.9$%. Result: The TR and NYHA functional class, as assessed by postoperative echocardiography, was significantly reduced (mean=$0.4{\pm}0.6$ and $2.0{\pm}0.7$, respectively p<0.001). There was one case of hospital mortality. One patient required permanent pacemaker insertion for third degree atrioventricular block. Conclusion: Our study shows that the Edwards $MC^3$ remodeling ring is easy to implant and it effectively corrects functional TR with excellent clinical and echocardiographic outcomes. Further follow-up and a larger clinical series are required to establish the long-term stability of this repair technique.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2012

Purpose: Golf is a popular sports activity after total knee arthroplasty in old age patients. We evaluated golf and implant loosening through the radiologic method. We also evaluated correlation of patterns of golf activity and clinical outcome to suggest guidelines to the patients. Materials and Methods: We carried out a retrospective case-control study of 80 patients (80 knees) who underwent TKR between 2005 and 2008, and followed up more than 3 years. We divided patients who played golf after TKR as a study group and who did not participate sports activities as a control group. We calculated the sum of width of radiolucent line in 7 sections around femoral component, 7 sections around tibial components and 5 sections in patella component using American Knee Society Roentgenographic Evaluation and Scoring system respectively. The inclusion criteria, was BMI (body mass index) was between 25 and $30kg/m^2$, and UCLA activity-level rating System score was between 5 and 8. We also got the information of patients' patterns of golf activities such as 1. the interval from surgery to return to golf activity. 2. the frequency of golf activities 3. using spike or cart. We obtained the information from patient's questionnaire and telephone interview. We compared with the VAS (visual analogue scale) respectively. And handicaps and driving distance was evaluated as well. Results: The study group's mean sum of radiologic score was 0.84 mm and 0.69 mm in control group. This is not statistically significant (p=0.22). Too early returning to golf (p=0.01) and left knee replacement (p<0.01) were statistically significant factors affecting clinical outcomes of golf activities after total knee arthroplasty. Conclusion: We concluded that golf activities after total knee arthroplasty is not correlated with radiographic loosening, and we need to give an explanation to the patients about increased pain when returing to golf too early and left side arthroplasties.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.