• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.45-59
• /
• 1997

Platelet-derived growth factor(PDGF) has been shown to play an important role in periodontal regeneration. The purpose of the present study was to examine the distribution of PDGF in experimentally created periodontal intrabony defects after flap surgery with various bone graft materials. Six healthy mongrel dogs were used in this study. Three-wall bony defects were created in maxillary and mandibular premolars, inflammation induced by wire ligation and injection of impression material into the defects. Eight weeks later, the experimental lesions thus obtained were treated by plain flap surgery(control group), flap surgery plus autogenous bone graft(autogenous bone group), flap surgery plus Biocoral graft(Biocoral group), or flap surgery plus bioglass graft(bioglass group), which were randomly assigned to the defects. After 4, H, and 12 weeks postoperatively, 2 dogs were sacrificed at each time and 1he specimens were taken for histological examinations and immunohistochemical examinations for PDGF. In the control defects the amount of new bone formation was minimal. In the autogenous bone and Biocoral group new bone was deposited around implanted particles and the amount of new bone was increased with time. A large number of bioglass particles exibited a central excabation and bone formation could be observed in the central excabation as well as around the particles. The expression of PDGF was low in the control group. The expression of PDGF in Biocoral group was increased at 1, H week, but decreased at 12 week. The increased PDGF expression in autogenous bone and bioglass group was maintained to the end of the experiment.

• Journal of Periodontal and Implant Science
• /
• 제32권1호
• /
• pp.51-59
• /
• 2002

The aim of the present study was to investigate the distribution of periodontally hopeless teeth in patients who had not been treated. Five hundred nineteen teeth of 163 patients who had visited at the Department of Periodontology, Chonbuk National University Hospital during the period from January 1999 to July 2001 were selected as a periodontally hopeless tooth. Selection criteria were as follows: 1) probing pocket depth more than 8mm, 2) tooth mobility of degree III, 3) radiographic bone loss more than 75%. The contralateral tooth to a hopeless tooth (experimental tooth) was designated as a control tooth. Between the experimental and control tooth, differences in probing pocket depth, tooth mobility and amount of radiographic bone loss were examined as well as correlation. The results showed that hopeless teeth were most frequently found in the maxillary first molar position and least frequently in the maxillary canine position. Differences between experimental and control teeth were 2mm in probing depth, 1 degree in tooth mobility, and 20% in amount of bone loss (p<0.01). The periodontal conditions between the experimental and control teeth showed correlation in general, however, statistical significances were found in posterior teeth positions. Within limitations of this study, it can be concluded that local factors may play a role in deterioration of periodontal disease along with symmetrical character of periodontal disease.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.411-422
• /
• 1993

Osseointegrated dental implants are now an accepted part of the prosthetic treatment of fully and partially edentulous patients. Clinical studies have shown that osseointegrated dental implants may successfully be used as abutments for prosthetic rehabilitations, and that the supporting tissue can be kept in a stable and healthy clinical state for prolonged periods of time. The purpose of this study was to look for differences in the distribution in the bacterial morphotypes around natural teeth and osseointegrated dental implants. The subgingival plaque around natural teeth and implants was analysed by means of differential phase-contrast microscopy. In addition, clinical indices used to analyse natural teeth condition were used to compare the condition of natural teeth and implants. The results were as follows : 1. In implants of partially edentulous patients, the plaque index, sulcus bleeding index(P<0.05), pocket depth(P<0.01) were greater than natural teeth. 2. Gingival crevicular fluid volume was not significantly different between natural teeth and implants. 3. In implants of fully edentulous patients, the plaque index was greater than natural teeth(P<0.01) and implants of partially edentulous patients(P<0.05), but sulcus bleeding index was not significantly different. 4. In partially edentulous patient, coccoid cell proportion was greater in implants than natural teeth (P<0.05). 5. In implants of fully edentulous patients, coccid cell proportion was even greater than implants of partially edentulous patients(P<0.05) and natural teeth(P<0.01). 6. Among three groups, the proportions of non-motile rods, motile rods, spirochetes and others were not significantly different. 7. The proportion of motile bacteria was not significantly different among three group.

• 분석과학
• /
• 제7권4호
• /
• pp.527-540
• /
• 1994

본 연구는 질소이온 주입시킨 7050A1 합금의 표면 미세구조 변화에 대하여 살펴보았다. 이온 주입은 이온을 가속시켜서 물리적으로 모재의 표면에 주입시키는 표면처리의 한 방법으로서, 본 연구에서는 가속 에너지를 100KeV로 하고 전류밀도는 $23.1{\mu}A/cm^2$, 주입량은 $5{\times}10^{15}ions/cm^2$, $5{\times}10^{17}ions/cm^2$과, $8{\times}10^{17}ions/cm^2$로 질소이온을 주입하였다. 이온 주입층은 EPMA, AES, XPS, TEM 등으로 분석하였으며, 그 결과를 computer simulation을 통하여 비교하여 보았다. 질소이온 주입시킨 7050A1 합금은 극 표면에서부터 약 $4000{\AA}$ 사이에서 AlN이 Gaussian 분포를 지니고 있었으며, 일정 깊이에서 이온의 주입에 의해 충격을 받은 영역을 관찰할 수 있었고 이러한 표면의 변화들은 미소경도에 영향을 미치게 되어 저하중에서 경도값의 상승을 야기했다.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.379-387
• /
• 2022

PURPOSE. The aim of this study is to compare the casts obtained by using conventional techniques and liquid crystal display (LCD) three-dimensional (3D) print techniques in the All-on-4 treatment concept of the edentulous mandibular jaw. MATERIALS AND METHODS. In this study, a completely edentulous mandibular acrylic cast (typodont) with bone-level implants placed with the Allon-4 technique served as a reference cast. In this typodont, impressions were taken with the conventional technique and dental stone casts were obtained. In addition, after scanning the acrylic cast in a dental laboratory scanner and obtaining the Standard Tessellation Language (STL) data, 3D printed casts were manufactured with a 3D printing device based on the design. The stone and 3D printed casts were scanned in the laboratory scanner and STL data were obtained, and then the interimplant distances were measured using Geomagic Control X v2020 (3D Systems, Rock Hill, SC, USA) analysis software (n = 60). The obtained data were statistically evaluated with one-way analysis of variance (ANOVA) and Tukey's pairwise comparison tests. RESULTS. As a result of the one-way ANOVA test, it was determined that the stone casts, 3D printed casts, and reference cast values in all distance intervals conformed to the normal distribution and these values had a significant difference among them in all distance intervals. In Tukey pairwise comparison test, significant differences were found between casts at all distance intervals. In all analyses, the level of significance was determined as .05. CONCLUSION. 3D printed casts obtained with a 3D LCD printing device can be an alternative to stone casts when implants are placed in edentulous jaws. [J Adv Prosthodont 2022;14:379-87]

• Journal of Periodontal and Implant Science
• /
• 제51권6호
• /
• pp.409-421
• /
• 2021

Purpose: The aim of this study was to compare the prevalence and bacterial load of 6 main periodontal pathogens between pairs of periodontal patients with and without type 2 diabetes mellitus. Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans genotypes were also investigated. Methods: Twenty patients affected by chronic periodontitis and type 2 diabetes were retrospectively selected and matched to 20 patients without diabetes on the basis of the degree and severity of periodontal disease. Microbiological data of subgingival biofilms were analysed and compared for the examined pathogens: A. actinomycetemcomitans, P. gingivalis, Prevotella intermedia, Treponema denticola, Fusobacterium nucleatum, and Tannerella forsythia. Results: The pairs were balanced in terms of demographic and clinical parameters, except for bleeding on probing and suppuration. In the microbiological test sites (4 for each patient), the mean probing pocket depth was 6.34±1.63 mm in patients with diabetes and 6.41±1.78 mm in patients without diabetes. No significant difference between pairs in the prevalence of P. gingivalis or the distribution of its genotypes was recorded. Patients with diabetes had a significantly greater amount of total bacterial load, P. gingivalis, T. denticola, T. forsythia, and F. nucleatum (P<0.05). Moreover, patients with diabetes had a higher number of sites with a greater cell count than patients without diabetes. When compared to the total bacterial load, only T. forsythia maintained its relative load in patients with diabetes (P=0.001). Conclusions: This retrospective matched study supports the hypothesis that microbiological differences exist among periodontal patients with and without diabetes mellitus.

• Restorative Dentistry and Endodontics
• /
• 제46권1호
• /
• pp.1.1-1.13
• /
• 2021

Objectives: The aim of this study was to evaluate the dystrophic mineralization deposits from 3 calcium silicate-based cements (Micro-Mega mineral trioxide aggregate [MM-MTA], Biodentine [BD], and EndoSequence Root Repair Material [ESRRM] putty) over time after subcutaneous implantation into rats. Materials and Methods: Forty-five silicon tubes containing the tested materials and 15 empty tubes (serving as a control group) were subcutaneously implanted into the backs of 15 Wistar rats. At 1, 4, and 8 weeks after implantation, the animals were euthanized (n = 5 animals/group), and the silicon tubes were removed with the surrounding tissues. Histopathological tissue sections were stained with von Kossa stain to assess mineralization. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX) were also used to assess the chemical components of the surface precipitates deposited on the implant and the pattern of calcium and phosphorus distribution at the material-tissue interface. The calcium-to-phosphorus ratios were compared using the non-parametric Kruskal-Wallis test at a significance level of 5%. Results: The von Kossa staining showed that both BD and ESRRM putty induced mineralization starting at week 1; this mineralization increased further until the end of the study. In contrast, MM-MTA induced dystrophic calcification later, from 4 weeks onward. SEM/EDX showed no statistically significant differences in the calcium- and phosphorus-rich areas among the 3 materials at any time point (p > 0.05). Conclusions: After subcutaneous implantation, biomineralization of the 3-calcium silicate-based cements started early and increased over time, and all 3 tested cements generated calcium- and phosphorus-containing surface precipitates.

• Journal of Periodontal and Implant Science
• /
• 제47권4호
• /
• pp.211-218
• /
• 2017

Purpose: The purpose of the present study was to perform a pattern analysis in patients with temporomandibular disorder (TMD) resulting from unilateral mastication due to chronic periodontitis. Methods: Thirty participants with signs or symptoms of TMD who engaged in unilateral mastication due to periodontitis-related discomfort (test group) were selected. Another 30 subjects exhibiting signs or symptoms of TMD resulting from unilateral mastication not due to chronic periodontitis (control group) were also recruited. An interview-based questionnaire was administered, and an examination of the temporomandibular joint (TMJ) with determination of periodontal status was performed. Results: The duration of unilateral mastication was significantly longer in the control group than in the test group. There was a significant negative correlation between the duration of unilateral mastication and the Community Periodontal Index score. Using the Research Diagnostic Criteria for TMD (RDC/TMD) axis I algorithms, all the subjects were assigned to 3 main groups. The test group exhibited significantly a higher diagnostic distribution of group III (arthralgia, osteoarthritis, or osteoarthrosis), and in both the test and control groups, the number of diagnoses was larger for the non-chewing side. The control group showed a significantly higher diagnostic distribution of group I (myofacial pain), and in both the test and control groups, the number of diagnoses was larger for the chewing side. Conclusions: The results of the present study indicate that unilateral mastication due to chronic periodontitis could induce not only pain but also structural TMJ changes if adequate treatment is not administered and supported within a short time from the onset of the condition. Therefore, immediate treatment of chronic periodontitis is recommended to prevent not only the primary progress of periodontal disease, but also secondary TMJ-related problems. Furthermore, subjects who have suffered chronic long-term periodontitis without treatment should be urged to undergo a TMJ examination.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.147-160
• /
• 1991

The purpose of this study was to examine, by the method of finite element analysis, how implant geometry with or without connection between natural tooth and osseointegrated abutments affected the stress distribution in surrounding bone and osseointegrated prosthesis. The mandibular first and second molars were removed and the two osseointegrated implants were placed in the first and second molar sites. Stress analysis induced by prostheses with connection(Model A)or without connection(Model B) between natural tooth(second bicuspid) and two osseointegrated abutments(first molar and second molar) was performed under vertical point load(Load P1) or distributed point load(Load P2). The results were as follows; 1. Under vertical point load, mesial tilting was shown in both Model A and Model B and inferior displacement of Model A was greater than that of Model B in the second bicuspid. 2. Under vortical point load, the first and second molars showed mesial tilting in both Model A and Model B, and inferior displacement of them was similar in Model A and Model B and was less than that of the second bicuspid. 3. Under distributed point load, mesial displacement was shown in Model A and Model B and inferior displacement of Model A was less than that of Model B in the second bicuspid. 4. Under distributed point load, mesial tilting was shown and inferior displacement of Model A was similar to that of Model B in the first and second molars. 5. In Model A under vertical point load, high stress was concentrated in the corneal portion of first molar and distributed throughout the second molar and the second bicuspid, and the stress distribution of the second molar was greater than that of the second bicuspid. 6. In Model B under vertical point load, high stress was concentrated in the coronal and mesio-cervical portion of the first molar. 7. In Model A under distributed point load, high stress was concentrated in the mesio-cervical portion of the first molar and evenly distributed throughout the second molar and the second bicuspid. 8. In Model B under distributed point load, high stress was concentrated in the disto-cervical portion of the second bicuspid and evenly distributed throughout the first and second molars.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권6호
• /
• pp.263-268
• /
• 2013

Objectives: The interforminal region, between the mandibular foramen, is known as a relatively safe area that is free of anatomic structures, such as inferior alveolar nerve, submandibular fossa, and lingual side of the mandible is occasionally neglected for its low clinical importance. Even in the case of a severely constricted alveolus, perforation of the lingual cortical bone had been intended. However, anterior extension of the inferior alveolar canal, important anatomic structure, such as concavity of lingual bone, lingual foramina, and lingual canal, has recently been reported through various studies, and untypical bleeding by perforation of the lingual plate on implantation has also been reported. Therefore, in this study, we performed radiographic and statistical analysis on distribution and appearance frequencies of the lingual foramina that causes perforation of the mandibular lingual cortical bone to prevent complications, such as untypical bleeding, during surgical procedure. Materials and Methods: We measured the horizontal length from a midline of the mandible to the lingual foramina, as well as the horizontal length from the alveolar crest to the lingual foramina and from the lingual foramina to the mandibular border by multi-detector computed tomography of 187 patients, who visited Dankook University Dental Hospital for various reasons from January 1, 2008 to August 31, 2012. Results: From a total of 187 human mandibles, 110 (58.8%) mandibles had lingual foramina; 39 (20.9%) had bilateral lingual foramen; 34 (18.2%) had the only left lingual foramen; and 37 (19.8%) had the only right lingual foramen. Conclusion: When there is consistent bleeding during a surgical procedure, clinicians must consider damages on the branches of the sublingual artery, which penetrate the lingual foramina. Also, when there is a lingual foramina larger than 1 mm in diameter on a pre-implantation computed tomography, clinicians must beware of vessel damage. In order to prevent these complications and progress with a safe surgical procedure, a thorough radiographic examination before the surgery is indispensable. Further, clinicians should retract lingual flap definitely to confirm the shape of the lingual bone and existence of the lingual foramina.