• 제목/요약/키워드: Impedance Parameter

검색결과 283건 처리시간 0.026초

가정용 연료전지 스택의 EIS 평가 기법 개발 (Development of EIS Evaluation Method about PEMFC 1kW STACK)

  • 박찬엄;한운기;정진수;고원식
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.100.1-100.1
    • /
    • 2011
  • Electrochemical impedance spectroscopy(EIS) are using widely as a useful technique mainly in the field of electrochemical for the analysis of electrode reactions or characteristics of the composites. The response analysis of the systems technique provides comprehensive informations about the characteristic and structure of complex and internal reaction. The EIS is the method to measure impedance of the measurement target classified by the frequency, it select the equivalent impedance model to give same response from the result and it calculate the parameter. Therefore, the chemical reaction inside the fuel cell is to modeling to electrical impedance. And as repeating the same experiment in each of the operating point, we can get each different parameter. As a result, we can establish the equivalent impedance model in each operating point. Therefore, if we use these models, we can evaluate the fuel cell without the internal design parameter of the fuel cell as required in existing modeling. The EIS is used typically technique for distinguish status of fuel cell called SOH(State Of Health). When the fuel cell is degradation, Efficiency and health of the fuel cell is reduced because internal impedance is increase. As usage of these principles, we can evaluate state of fuel cell through the impedance analysis of fuel cells. In this study, we are presents EIS distinction system and algorithm for residential fuel cell systems. At the time of the fuel cell installation in the fields, the EIS system and proposed algorithm will be able to apply as technique for efficiency and performance evaluation about fuel cell system.

  • PDF

새로운 구조의 동축 테스트 소켓을 이용한 미세 피치 프로브 핀의 신호 전달 특성 개선 (Improvement of Signal Transfer Characteristics of Fine Pitch Probe Pin Using Coaxial Test Socket with New Structure)

  • 서정준;김문정
    • 반도체디스플레이기술학회지
    • /
    • 제23권1호
    • /
    • pp.97-103
    • /
    • 2024
  • In this paper, the difference between the S-parameter and the characteristic impedance according to the structural change of the fine pitch coaxial socket was analyzed. A pitch of the probe pin was applied to 0.20mm, and ground pins of different conditions were placed on each of the five signal pins. Insertion loss and reflection loss were analyzed for the coaxial socket of normal structure and the two sockets of the proposed structure. In addition, the difference in characteristic impedance was analyzed using time domain reflectometry. Through the analysis, it was confirmed that the characteristic impedance was improved applying the new structures of the socket at the same pitch

  • PDF

S-parameter의 변화를 유도하는 임피던스 변화 감지를 통한 전자회로의 결함검출회로 (The defect detection circuit of an electronic circuit through impedance change detection that induces a change in S-parameter)

  • 서동환;강태엽;유진호;민준기;박창근
    • 전기전자학회논문지
    • /
    • 제25권4호
    • /
    • pp.689-696
    • /
    • 2021
  • 본 논문에서는 고장예측진단 및 건전성 관리 기법(Prognostics and Health Management, PHM)을 적용하기 위해 해당 시스템 혹은 회로 내부에서 결함특성을 감지하고 예측할 수 있는 회로 구조를 제안하였다. 기존 연구에서 회로 결함의 진행에 따라, S-parameter 크기 최소값의 주파수가 변화하는 것을 확인하였다. 이러한 특성을 기존에는 네트워크 분석기(Network Analyzer)를 활용하여 측정하였으나, 본 연구에서는 같은 결함검출기법을 활용하더라도 큰 계측장비 없이 결함의 진행상황 및 잔여 수명, 결함발생 여부를 확인할 수 있는 소형화된 회로를 설계하였다. 본 연구에서는 S-parameter의 변화를 야기하는 임피던스의 변화를 감지할 수 있도록 회로를 설계하였으며, Bond-wire의 온도반복에 따른 S-parameter 변화 측정결과를 제안하는 회로에 적용하였다. 이를 통해 해당 회로가 Bond-wire의 결함을 감지할 수 있다는 것을 성공적으로 검증하였다.

Realtime Measurement of Impedance Locus using Impedance Spectroscopy: How Many and How Low Frequencies Are Required \ulcorner

  • T., Fukumoto;G. M., Eom;S., Ohba;N., Hoshimiya
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1194-1197
    • /
    • 2004
  • High temporal-resolution and accurate measurement of skin impedance locus provides useful data for the identification of the physiological/psychological changes and also the identification of acupuncture point. An impedance spectroscopy method using digitally constructed current waveform consisting of many frequency components (multiples of 1Hz) was reported3. The time resolution of the method depends on the lowest frequency used in the waveform construction, and therefore, the measurement would be faster if the lowest frequency is the higher. However, it was not clear that how many and how low frequencies must be used for the estimation of the skin impedance parameters from which the impedance locus can be drawn. This study shows the relationship between the estimation error of the impedance parameters and the frequency coverage of the spectroscopy. The results of this study are expected to serve as the reference of the frequency selection in the impedance spectroscopy.

  • PDF

임피던스 파라미터의 자기 조절 기능을 갖는 위치 기반 임피던스 제어기의 설계 및 적용 (A Design and Implementation of Position Based Impedance Controller with Self-Adjusted Impedance Parameters)

  • 황인호;박영칠
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.410-410
    • /
    • 2000
  • Impedance control is recognised as one of the most proper control scheme to carry out the assembly tasks, since it can control the dynamic relationship between the manipulator and environment directly. However, it is well known that the contact force cannot be controlled directly using the impedance control. Also impedance parameters should be properly defined depending on the task to be performed. We propose a new position based impedance control, which has self-adjusted impedance parameters and can control the contact force explicitly, Impedance parameters, as time-varying parameters, are adjusted automatically based on the measured contact force and the position error during the task. A proposed algorithm was implemented on the peg-in-hole task with the industrial manipulator. We shows the effectiveness of proposed control method experimentally.

  • PDF

차동 임피던스 분석을 사용한 SATA 커넥터의 신호 전달 특성 개선 (Signal Transmission Properties Improvement of Serial Advanced Technology Attachment Connector Using Analysis of Differential Impedance)

  • 양정규;김문정
    • 전자공학회논문지
    • /
    • 제50권2호
    • /
    • pp.47-53
    • /
    • 2013
  • 본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스 계산 방법을 적용하여 설계 변경 방법을 제안하고 신호 전달 특성을 개선하였다. 3차원 FEM(Finite Elements Method) 전자기장(Electromagnetic Field) 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 계산하고, 신호 전달 특성을 분석한다. 차동 임피던스는 Odd mode 임피던스를 이용하여 계산되므로 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스 값이 필요하다. 따라서 시뮬레이터를 이용하여 SATA 커넥터의 각각의 값을 추출하여 차동 임피던스를 계산하였고, 이 값은 $107.3{\Omega}$으로 설계 사양을 만족하지 못하였다. 신호 전달 특성 개선을 위해서 SATA 커넥터의 핀을 $d_x$, $d_y$ 방향으로 설계 변경하고, 각 경우의 신호 전달특성과 차동 임피던스를 분석하였다. $d_y=0.1mm$의 경우에서 신호 전달 특성이 가장 우수하게 나타났고, 차동 임피던스가 $98.7{\Omega}$으로 정합되었다. 이때, 반사손실은 1.5 GHz에서 15 dB 개선되었다.

A Study on Implementation of Stable Interaction Control System

  • Yongteak Lim;Kim, Seungwoo
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 ITC-CSCC -2
    • /
    • pp.608-611
    • /
    • 2000
  • We introduce Adaptive Fuzzy Impedance Controller for position and force control when robot contact with environment. Because Robot and environment was always effected by nonlinear conditions, it need to deal with parameter’s uncertainty. For solving this problem, it induced Fuzzy System in Impedance Control so fuzzy system is impedance’s stiffness gain. We apply adaptive fuzzy impedance controller in One-Link Robot System, it shows the good performance on desired position control and force control about contacting with arbitrarily environment.

  • PDF

매설지선의 접지임피던스의 주파수의존성에 대한 모사기법 (A Method of Simulating the Frequency-dependent Ground Impedance of Counterpoises)

  • 이복희;신희경;성창훈
    • 조명전기설비학회논문지
    • /
    • 제26권3호
    • /
    • pp.73-79
    • /
    • 2012
  • A counterpoise is commonly employed in grounding systems installing near the ground surface of low resistivity soils and radial-type counterpoises are used in the limited space. Recently some studies on the evaluation of ground impedance of paralleling ground electrodes have carried out, but the data for providing the frequency-dependent ground impedances considering potential interferences are not yet sufficient. In order to provide the information about the design of grounding systems for surge protection, the simulations of the frequency-dependent ground impedance of various shaped counterpoises are carried out by using the distributed parameter circuit model including the effect of potential interferences. This paper presents the theoretical simulations and actual experiments of the frequency-dependent ground impedance of paralleling and 3 or 4-arms star counterpoises. The accuracy of the simulation methodology is examined by the comparison with the measured results, and the results show a good agreement between the simulation and the experiment.

고속 ATE 시스템을 위한 임피던스 정합회로 구현 (Implementation of Impedance Matching Circuit for ATE)

  • 김종원;서용배;이용성
    • 반도체디스플레이기술학회지
    • /
    • 제5권4호
    • /
    • pp.17-22
    • /
    • 2006
  • In the manufacturing processes of semiconductor, test process is important for quality of products. In the manufacturing process of dynamic memory, memory test is more important. So, automatic test equipment(ATE) is used necessarily. But, according to increase of speed of dynamic memory operation, the rapid test equipment is needed. Impedance matching between ATE and dynamic memory is expected to be an important problem for making a rapid test equipment over 1Gbps. According to increase of speed, inner impedance of ATE also works on important parameter for test. This paper is about the method that is for impedance matching of inner impedance and coaxial cable occurring in manufacturing of ATE. We proved effects of inner impedance by electric theory and verified the method of impedance matching using computer simulation.

  • PDF

임피던스 방법을 이용한 기공율 측정에 대한 연구 (Void Fraction Measurements Using the Impedance Method)

  • 김무환;양훈철;송철화;정문기
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.721-727
    • /
    • 2000
  • Impedance method was carried out to design the electrode that can measure the void fraction of the bubbly flow in pool reservoir. To find out the optimum electrode shape, Styrofoam-tests were performed in a specially designed acrylic reservoir. Three kinds of electrodes were designed to compare the characteristics of water-air flow. The resistance was increased as the void fraction increased and the capacitance was decreased as the void fraction increased. The resistance is a main parameter to express the nature of the water-air flow in impedance method. Almost all the values of impedance were involved in resistance. The degree of deviation from the mean-resistance values showed reasonable results. Electrode type-I expressed excellent results among the three electrode shapes. The impedance values in void fraction 0-10% were similar to those of Maxwell's equation. But the impedance values in void fraction 10-20% were not similar to those of Maxwell' equation because of the edge effect near electrode.

  • PDF