• 제목/요약/키워드: Impedance Curve

검색결과 135건 처리시간 0.027초

엔진 흡기계에 쓰이는 다공형 직조관의 음향 임피던스 측정 (Measurement of acoustic impedance from the transmission coefficients of porous woven hoses in engine intake systems)

  • 박철민;이정권
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
    • /
    • pp.371-374
    • /
    • 2001
  • 내연기관의 흡기 소음을 줄이기 위한 효과적인 소음 제어 요소로서 다공형 직조관(porous woven hose)이 널리 사용된다. 직조관이 사용된 흡기계의 음향 특성을 예측하기 위해서는 직조관의 임피던스(acoustic wall impedance)에 대한 정보를 알아야 한다. 그러나, 높은 저항(resistance), 두께, 곡률, 비균질성 등의 특수한 음향학적/구조적 특성 때문에 직조관의 임 피던스를 정확하게 측정하는 것은 쉽지 않다. 본 연구에서는 소음기의 전달손실(transmission loss)을 측정하는데 널리 사용되는 간단한 측정장치를 이용하여 직조관의 임피던스를 측정하였다. 측정된 임피던스에 대해 직조상태를 나타내는 인자와 주파수를 독립 변수로 사용하여 curve-fitting을 수행하여, 직조상태가 다른 직조관의 임피던스를 예측하였다. 이렇게 예측된 임피던스로부터 실제 사용되는 범위 내에서 임의의 길이를 가지는, 직조상태가 다른 직조관의 전달 손실을 예측하였고, 측정된 전달손실과 비교하여, 잘 일치하는 것을 확인하였다. 본 연구에서 제시한 방법은 직조관의 음향 특성을 파악하고, 직조관이 사용된 자동차 흡기계의 음향성능을 예측하는데 유용하게 사용될 수 있다.

  • PDF

An Experimental Analysis of the Ripple Current Applied Variable Frequency Characteristic in a Polymer Electrolyte Membrane Fuel Cell

  • Kim, Jong-Hoon;Jang, Min-Ho;Choe, Jun-Seok;Kim, Do-Young;Tak, Yong-Sug;Cho, Bo-Hyung
    • Journal of Power Electronics
    • /
    • 제11권1호
    • /
    • pp.82-89
    • /
    • 2011
  • Differences in the frequency characteristic applied to a ripple current may shorten fuel cell life span and worsen the fuel efficiency. Therefore, this paper presents an experimental analysis of the ripple current applied variable frequency characteristic in a polymer electrolyte membrane fuel cell (PEMFC). This paper provides the first attempt to examine the impact of ripple current through immediate measurements on a single cell test. After cycling for hours at three frequencies, each polarization and impedance curve is obtained and compared with those of a fuel cell. Through experimental results, it can be absolutely concluded that low frequency ripple current leads to long-term degradation of a fuel cell. Three different PEMFC failures such as membrane dehydration, flooding and carbon monoxide (CO) poisoning that lead to an increase in the impedance magnitude at low frequencies are simply introduced.

열차운행 시격 변경에 따른 트램 급전계통 해석 (Analysis of Tram Feeding System according to Train Diagram Change)

  • 김동만;장진영;김재문;김양수
    • 전기학회논문지
    • /
    • 제64권4호
    • /
    • pp.634-639
    • /
    • 2015
  • In order to understand phenomenon of the electric railway power feeding system in the construction planning step, analysis of the overall system including electric characteristic of electric railway power feeding system, train running characteristic and power consumption pattern and train operation plan and gradients of railroad and curve radius is required. This paper study the feeder system by analysis of comprehensive system according to train operation plans, line impedance, running characteristic of train, electrical properties of the feeder system. In order to understand phenomenon to the feeder system of tram exactly regarding export of the field railroad preceeding actively recently.

마이크로스피커에서 공명진동수와 QTS 사이의 연관성 (Relationship Between the Resonance Frequency and QTS for Microspeaker)

  • 오세진
    • 한국재료학회지
    • /
    • 제21권7호
    • /
    • pp.403-409
    • /
    • 2011
  • Micro speakers are used to reproduce sound in small electric and information and communications devices, such as cellular phones, PMPs, and MP3 players. The acoustical properties and sound quality, which are changed due to the decreased size of the speaker, are often adjusted varying the type and thickness of the diaphragm. The most widely used diaphragm material is thin polymer. It was previously reported by the author of this paper that the resonance frequency of a micro speaker is changed by the type and thickness of a polymer diaphragm. In this paper, the frequency response near the resonance frequency of a micro speaker was studied as functions of the type and thickness of the polymer diaphragm. While $R_{max}$ and $R_{DC}$ were affected by the type and thickness, an analysis of the electrical impedance curve revealed that $R_o(= R_{max}/R_{DC})$ and ${\Delta}f$ were not changed. Thus, $Q_{TS}$ which was function of $R_o$, ${\Delta}f$, and the resonance frequency, is only related to the resonance frequency. The increase of the resonance frequency led to a proportional rise of $Q_{TS}$. The change of the frequency response near the resonance frequency was not dependent on the type or thickness of the polymer diaphragm, but was affected by the resonance frequency.

Corrosion Behavior of High Pressure Die Cast Al-Ni and Al-Ni-Ca Alloys in 3.5% NaCl Solution

  • Arthanari, Srinivasan;Jang, Jae Cheol;Shin, Kwang Seon
    • Corrosion Science and Technology
    • /
    • 제16권3호
    • /
    • pp.100-108
    • /
    • 2017
  • In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

Theoretical considerations on the giant magnetoimpedance effect in amorphous ribbons

  • Phan, Manh-Huong;Nguyen Cuong;Yu, Seong-Cho
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
    • /
    • pp.60-61
    • /
    • 2003
  • Theoretical considerations on a giant magneto-impedance (GMI) effect in amorphous ribbons (i.e., thin films) have been made in terms of the expressions of effective permeability and impedance derived in the frame of classical electrodynamics and ferromagnetism. The dependence of GMI effect on the external do magnetic field (H$\_$ext/) and the frequency of alternating current are simulated and discussed in the knowledge of energy conversion consisting of the current energy loss, the ferromagnetic energy consumption, and the magnetic energy storage in the film. The obtained results are summarized as follow: (a) As frequency f< 20 ㎒, the real part of effective permeability (${\mu}$′) changes slightly. The peak of the ${\mu}$′curve always locates at H$\_$ext/=H$\_$ani/ - the anisotropy field. However, the peak value of ${\mu}$′ tends to increase with increasing frequency in the frequency range of 11-20 ㎒. (b) In the frequency range, f= 21-23 ㎒, a negative peak additionally appears. Meanwhile, both the positive and negative peak values rapidly increase with increasing frequency and their peak positions shift towards a high H$\_$ext/. (c) The positive peak value of ${\mu}$′ starts to decrease at f= 29 ㎒ and its negative peak does so at about 35 ㎒. Then, both peaks keep such a tendency and their peak positions move to high H$\_$ext/, as increasing frequency. (d) The dependence of the imaginary part of effective permeability (${\mu}$") on the external dc magnetic field and the frequency of the alternating field indicates that there is only one peak involved in ${\mu}$" for the whole frequency range. (e) The impedance vs. magnetic field curves at various frequencies show that there is a critical value of frequency around f= 18-19 ㎒ where the transition between two frequency regimes occurs; the one (low frequency) in which ${\mu}$′ predominantly contributes to the GMI effect and the other (high frequency) in which ${\mu}$" determines the GMI effect.

  • PDF

Bioelectrical Impedance Analysis for Prediction of Early Complications after Gastrectomy in Elderly Patients with Gastric Cancer: the Phase Angle Measured Using Bioelectrical Impedance Analysis

  • Yu, Byunghyuk;Park, Ki Bum;Park, Ji Yeon;Lee, Seung Soo;Kwon, Oh Kyoung;Chung, Ho Young
    • Journal of Gastric Cancer
    • /
    • 제19권3호
    • /
    • pp.278-289
    • /
    • 2019
  • Purpose: Phase angle obtained using bioelectrical impedance analysis (BIA) provides a relatively precise assessment of the nutritional status of elderly patients. This study aimed to evaluate the significance of phase angle as a risk factor for complications after gastrectomy in elderly patients. Materials and Methods: We evaluated 210 elderly patients (aged ${\geq}65years$) who had undergone gastrectomy for gastric cancer between August 2016 and August 2017. The phase angle cutoff value was calculated using receiver operating characteristic curve analysis according to sex. A retrospective analysis regarding the correlation between early postoperative complications and well-known risk factors, including the phase angle, was performed. Results: Multivariate analysis revealed that the presence of two or more comorbidities (odds ratio [OR], 3.675) and hypoalbuminemia (OR, 4.059) were independent risk factors for overall complications, and female sex (OR, 2.993) was independent risk factor for severe complications. A low phase angle (OR, 2.901 and 4.348, respectively) and total gastrectomy (OR, 4.718 and 3.473, respectively) were independent risk factors for both overall and severe complications. Conclusions: Our findings show that preoperative low phase angle predicts the risk of overall and severe complications. Our findings suggest that BIA should be performed to assess the risk of postoperative complications in elderly patients with gastric cancer.

매개변수 평가법을 이용한 압전재료의 재료물성 최적화 연구 Part I. 다결정 PZT 세라믹스 (Optimization Study for Material Properties of Piezoelectric Material Using Parameter Estimation Method: Part I. Polycrystal PZT Ceramics)

  • 신호용;이호용;홍일곡;김종호;임종인
    • 한국전기전자재료학회논문지
    • /
    • 제35권5호
    • /
    • pp.471-479
    • /
    • 2022
  • Recently, piezoelectric devices, such as ultrasonic surgery, ultrasonic atomizer, and ultrasonic speaker, are analyzed and designed by finite element simulation methods. However, the discrepancy between the design and the experiment results of the device typically occurs due to the inaccuracy of the piezoelectric material properties. To improve the simulation accuracy, the material properties of the PZT ceramics were better refined using parameter estimation method. The material parameters are elastic stiffness cEij and piezoelectric constant eij of PZT ceramics. The impedance curve characteristics for the LTE mode of PZT ceramics were calculated. The mismatch between the simulation and the experimental data were compared and minimized by a least square method. Finally, the simulated impedance data were compared with the experimental data for the various vibration modes of PZT ceramics and the optimized material properties of PZT ceramics were verified. To further verify the accuracy, this method was also applied to piezoelectric PMN-PT single crystals.

전기도금 된 Cu/Ni80Fe20 코어/쉘 복합 와이어에서 자기임피던스 및 자기완화 (Magneto-impedance and Magnetic Relaxation in Electrodeposited Cu/Ni80Fe20 Core/Shell Composite Wire)

  • 윤석수;조성언;김동영
    • 한국자기학회지
    • /
    • 제25권1호
    • /
    • pp.10-15
    • /
    • 2015
  • 높은 전기전도도를 가진 비자성 금속 코어와 연자성 쉘을 가진 복합와이어의 자기임피던스를 원주방향 투자율로 표현하는 모델을 맥스웰 방정식으로부터 유도하였다. Cu(직경 $100{\mu}m$)/$Ni_{80}Fe_{20}$(두께 $15{\mu}m$) 코어/쉘 복합 와이어를 전기도금방법으로 제작하였다. 코어/쉘 복합 와이어의 길이방향으로 10 kHz에서 10 MHz 범위의 주파수를 가지는 교류전류와 0 Oe에서 200 Oe 범위의 직류 자기장을 가하여 임피던스 스펙트럼의 자기장 의존성을 측정하였다. 유도된 모델을 적용하여 측정된 임피던스 스펙트럼으로부터 원주방향 복소 투자율 스펙트럼을 뽑아내었다. 뽑아낸 원주방향 복소 투자율 스펙트럼은 단일 완화주파수의 Debye 식으로 매우 잘 곡선적합되는 완화형 분산을 보였다. 원주방향 복소 투자율 스펙트럼의 자기장 의존성을 분석하여, 본 코어/쉘 복합 와이어의 경우 길이 방향의 자기이방성을 가지며 원주방향으로의 자화회전이 완화형 복소 투자율 스펙트럼에 기여하는 단일 성분이라는 것을 규명하였다.

진단 직후 유방암.직장암 환자의 체지방량과 자연 살 세포 활동량 (Body Fat Percentage and Natural Killer Cell Activity of Breast and Rectal Cancer Patients after Diagnosis but before Treatment)

  • 김달숙;전명희
    • 대한간호학회지
    • /
    • 제38권2호
    • /
    • pp.321-331
    • /
    • 2008
  • Purpose: To examine the relationship between body fat percentage (BFP) and N-K cell activity (NKCA) in Korean breast and rectal cancer patients just after diagnosis. Methods: With 35 subjects enrolled between November 2002 and May 2003, Bioelectrical Impedance Analysis was used to estimate BFP. FACS Analysis was used to measure N-K cell activity. The relationships between BFP and NKCA were identified by using curve estimation, simple regression, and multiple regression, Results: The mean BFPs of the subjects and all the sub-groups were higher than acceptable BFPs. Both the mean NKCAs of male and female subjects were lower than that of healthy women. NKCA was explained by BFP with a 14.9% variance in the total subjects (p<.05). There were significant negative relationships between BFP and NKCA after controlling age, type of cancer, and stage of cancer while no significant relationship was found after controlling for gender. The relationships between BFP and NKCA in the sub-groups of female, breast cancer, and stage I, and II were significant. The relationships between male, rectal cancer, and the stage III, and VI sub-groups were not identified, but they revealed a mild to moderate steep in curve estimation. Conclusion: Weight reduction could prevent the risk and advancement of breast and rectal cancer in Koreans.