• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.50-58
• /
• 2000

The purpose of this study was to investigate the causes of food impaction and to explore solutions as well. For this study, 39 patients with food impaction were selected. 77 contact areas in these patients were investigated mobility, tightness of contact area, gingival index, plaque index, attachment loss, alveolar bone loss, proximal caries, marginal ridge distance and occlusal relationships. The results were as follows ; 1. Teeth without distal support were found to be the most frequent site of food impaction (41.6%). Food impaction was found to be more frequent in the upper teeth (65.2%) than the lower teeth (33.8%). 2. Food impaction was found in tight contact cases (71.4%). Alveolar bone loss was not found in the early stage of food impaction (83.1%) 3. The distance between the marginal ridges of food impaction sites (mean=0.48mm) was short-er than that of the control group. (mean=0.77mm) (p<0.001) 4. In 18.2% of the cases, proximal carries were found at the food impaction site. 5. Food impaction affected patient's occlusion with the following frequencies, cusp to marginal ridge relationship (72.7%), cusp to fossa relationship (3.9%) and stepped relationship (23.4%).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.63-71
• /
• 1998

In a diesel engine the phenomenon of spray impaction on a combustion chamber wall has been taken as an undesirable matter because of the deposition of fuel on the surfaces, and the subsequent slow evaporation and mixing with air resulting in unburned hydrocarbons. Therefore many researches have concentrated on avoiding fuel impaction on surfaces. On the contrary done a number of studies using spray wall impactions in a positive way, which makes the droplets smaller, changes the direction into free spaces far from the wall and also improves mixing with air. In this paper the angle variations of the impaction land sufrace prepared for the injection spray is analysed as a simulative manner. The spray dispersions, vapor distributions and flow fields are compared with impacting angle variation. The results show more angle give more vapor distribution until $15^{\circ}$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.161-167
• /
• 2006

Objectives: Pericoronitis was the most common indication for mandibular third molar surgery and there are no universally acceptable predictive criteria for pericoronitis occurrence. This study was designed to analyze the correlation of the pericoronitis and the eruption state of the mandibular third molar using panoramic radiographs statistically. Materials and Methods: 218 patients whose chief complaint was the extraction of the mandibular third molar were examined. The presence and absence of pericoronitis, age, sex, position of extraction site, angulation, impaction degree, position to the anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar were assessed. Then the correlation of pericoronitis and the eruption state of the mandibular third molar were analyzed by Student's t-test and chi-square test. Results: There was no correlation between Pericoronitis and age, sex, position of the mandibular third molar. The angulation(P=0.005), impaction degree(P=0.043), relation with anterior border of mandibular ramus(P=0.003), distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar(P<0.05) were correlated with pericoronitis. Conclusions: The occurrence of the pericoronitis can be predicted by the eruption state of the mandibular third molar such as angulation, impaction degree, relation with anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of third molar.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.27-33
• /
• 2014

Purpose: The purpose of this study was to investigate the food impaction between implant prostheses and adjacent natural teeth. Materials and methods: For this study, 51 patients with food impaction were selected and investigated mobility, tightness of contact area, gingival index, plaque index, attachment loss, alveolar bone level, proximal caries, marginal ridge distance and occlusal relationships. Results: Food impaction was found in the upper teeth (60.7%) more than the lower teeth (39.2%). Food impaction was occurred on mesial side of implant prostheses (86.2%) more than distal side (13.7%). Food impaction was mostly found in loose or open contact area (94.2%). Food impaction was frequent on stepped relationship between implant and adjacent teeth. Conclusion: Treatment plan should include proper adjacent and antagonistic occlusal plane and occlusal surface, to prevent food impaction, and the plan should include less adjacent tooth mobility with proper tightness between implant prostheses and adjacent teeth.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.625-631
• /
• 2001

The anatomic structure around interproximal area plays an important role not only in the natural teeth, but also in the implant. The loss of papilla can lead to cosmetic deformity, phonetic problem, food impaction on the anterior dentition, and masticatory problem, food impaction and proximal caries on the posterior dentition. The purpose of this study was to evaluate the relationship between interdental papilla existence and distance from contact point to alveolar crest in Korean posteior dentition. 45 Korean adult patients(31males, 14 females) participated in this study. Measurements were carreid out total 126 interproximal areas, 18 first premolar, 31 second premolar, 40 first molar, and 37 second molar areas. Papilla index was recorded as suggested by Jemt. Distance between contact point and alveolar crest measrued by Florida $probe^{R}$, after flap elevation. Each distance was measured 10 times by every 0.1mm unit. The results showed that the mean Papilla index 1.37 and mean distance between contact point and alveolar crest was 7.44mm. The correlation between the Papilla index and distance was high negative correlation(Pearson correlation=-0.47), and it was statistically significant(P=0.000) When the distance between contact point and alveolar crest was 5mm, the loss of papilla was appeared almost in half cases. When the distance was 6mm, the papilla loss was present 95%, when 7mm, the papilla loss was 100%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.67-76
• /
• 2003

Recently consideration of health and interest on bio aerosols have been growing steadily. In this study, inertial impactor, which can be used to collect airborne particles and bio aerosols, was newly devised for real-time observation on the particles collected on impaction plate. and named Visual Impactor. Flow field and particle trajectory in the space between nozzle and impaction plate was analyzed numerically, and the collection effciencies were calculated. Calibration and performance evaluation of the Visual Impactor was conducted with polydisperse aerosols generated from 0.1％ sodium chloride solution. Cut-off diameter from numerical simulation was in good agreement with that from experimental results. Because of particle bounce and particle deposition on nozzle tip due to short jet-to-plate distance, the collection efficiencies from numerical and experimental analyses were different slightly. Visual Impactor was used to collect airborne particles, and the features of collected particles could be seen in real-time. Airborne particles in different weather conditions (fine, cloudy, and rainy) were sampled and compared one another The features of collected airborne particles were dependent strongly upon relative humidity. In addition, with hours elapsing, shapes and colors of collected particles were changed by evaporation and surface tension, etc.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.148-156
• /
• 2007

Purpose: The aim of this study is the changes of upper respiratory airway space in patients with mandibular prognathism after 2-jaw orthognathic surgery in patients with skeletal classs III malocclusion. Method: We measured the lines between selected upper airway landmarks on lateral cephalometric x-ray films of skeletal class III 64 persons who had not been operated yet, were 6 months after operation. The test subjects were divided into 3 groups according to maxillary movement, as follows; maxillary advancement (MA) group, maxillary posterior impaction (MPI) group, maxillary posterior impaction and superior repositioning (MPI+MSR) group. Result: In this study, nasopharyngeal airway space in MPI+MSR group was significantly increased after operation (p<0.05). Oropharygeal and hypopharyngeal airway space in MA group and MPI group were significantly decreased after operation (p<0.05). From hyoid bone to anterior mandible point distance in MA group and MPI group were significantly decreased after operation (p<0.05). Conclusion: Oropharygeal and hypopharyngeal airway space were influenced more by mandibular set-back than maxillary movement. Maxillary movement surgery as well as mandibular setback surgery should be taken into consideration in order to minimize symptoms related to obstructive sleep apnea syndrome after operation.

• The Journal of the Korean dental association
• /
• v.51 no.6
• /
• pp.346-354
• /
• 2013

Early identification of maxillary canine impaction is very important, because of treatment duration time. Analysis used by 3-dimensional computed tomography is more important than before in treatment planning. The aim of this study was to analysis of factors associated with the treatment during time of forced eruption of the impacted maxillary canine using 3-dimensional computed tomography. 17 patients were analysed in Daejeon dental hospital of Wonkwang university(16 patients with unilateral impactions and 1 patient with bilateral impaction). In total, 18 maxillary impacted cannines were analysed by 3-dimensional computed tomography. The results obtained were as follow; 1. There was positive correlation between the age of patient and treatment duration time. 2. There was positive correlation between the distance of occlusal plane to cusp of maxillary impacted canine and treatment duration time, and negative correlation between the length of maxillary impacted canine and treatment duration time. 3. There was positive correlation between the angulation of midsagittal plane to axis of maxillary impacted canine and treatment duration time, and negative correlation between occlusal plane to axis of maxillary impacted canine and treatment duration time. In conclusion, age, tooth length, distance from the canine cusp tip to the occlusal plane, angulation of tooth axis to occlusal plane and midsagittal plane allow that we can predict treatment duration time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.1-8
• /
• 2000

In this paper, positioning schemes based on AOA(Angle of Arrival), TOA(Time of Arrival), and TDOA(Time Difference of Arrival) measurements are reviewed and analyzed. In the case of using those schemes in microcell structure with severe multipath fading and shadowing conditions, the rapid and unpredictable variation of signal level makes it difficult to estimate the position and velocity of mobiles. Therefore, we propose a novel mobile tracking method based on the multicriteria decision making, in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station, the moving direction, and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Through a simulation, we analysis the impaction of the frequent change of direction and speed of mobiles.