• Journal of Korea Foundry Society
• /
• v.13 no.1
• /
• pp.94-101
• /
• 1993

The effects of strontium content as modifier on microstructure and mechanical properties were studied in Al-10%Si-0.3%Mg cast alloys. There were not big differences in the form of eutectic Si particle and its morphology depending on adding amount of strontium, but the alloy modified by 0.012%Sr had shown the higher values than the alloy modified 0.038%Sr in strength, elongation and impact value.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.107-117
• /
• 2019

In case of pure rubber materials, the initial quality of the rubber materials would be excellent, however, the durability against external impact might be poor. In order to overcome the relatively low durability, textile cord could be employed with silicone rubber. We have studied the improvement of heat-resistant adhesion properties of silicone adhesives between silicone rubber and PET fibers by applying various conditions including dip solution recipe. The silicone rubber used was a platinum catalyst curing type and platinum catalyst type silicone adhesive was used as an adhesive to obtain an optimum adhesive force. Furthermore, the bonding mechanism between silicone and PET fiber was established.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.387-398
• /
• 2002

The impact response and damage of CLAS panel was investigated experimentally. The facesheet material used was RO4003 woven-glass hydrocarbon/ceramic and the core material was Nomex honeycomb with a cell size of 3.2mm and a density of 96 kg/㎥. The shield plane used was RO4003 and 2024-T3 aluminum. Static indentation and impact test was conducted to characterize the type and extent of the damage observed in two CLAS panels, and the performance of antenna used in a wireless LAN system. Correlation of peak contact force, residual indentation and the delamination area shows impact damage of the panel with an aluminum shield plane is larger than that of the panel with RO4003 shield plane, although the former is more penetration resistant. The damage was observed by naked eye, ultrasonic inspection and cross sectioning. The shape and size of delamination was estimated by ultrasonic inspection, and the area of delamination linearly increases as impact energy increases. The performance of impact damaged antenna was estimated by measuring return loss and radiation pattern. It was revealed that the performance of antenna was related to the impact damage and there was a threshold that the performance of antenna fell as impact energy level changed. The threshold was between the impact energies of 1.5J and 1.75J.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.339-349
• /
• 2020

Double-leaf blast-resistant doors consisting of steel box and slab are application-specific structures installed at the entrances of protective facilities. In these structural systems, certain spacing is provided between the door and wall. However, variation in the boundary condition and structural behavior due to this spacing are not properly considered in the explosion analysis and design. In this study, the structural response and failure behavior based on two variables such as the spacing and blast pressure were analyzed using the finite element method. The results revealed that the two variables affected the overall structural behavior such as the maximum and permanent deflections. The degree of contact due to collision between the door and wall and the impact force applied to the door varied according to the spacing. Hence, the shear-failure behavior of the concrete slab was affected by this impact force. Doors with spacing of less than 10 mm were vulnerable to shear failure, and the case of approximately 15-mm spacing was more reasonable for increasing the flexural performance. For further study, tests and numerical research on the structural behavior are needed by considering other variables such as specifications of the structural members and details of the slab shear design.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1863-1869
• /
• 2014

The amplification of telomerase component (TERC) gene could play an important role in generation and treatment of haematological malignancies. This present study was aimed to investigate copy number amplification status of TERC gene in chronic myeloid leukaemia (CML) patients who were being treated with imatinib mesylate (IM). Genomic DNA was extracted from peripheral blood of CML-IM Resistant (n=63), CML-IM Respond (n=63) and healthy individuals (n=30). TERC gene copy number predicted (CNP) and copy number calculated (CNC) were determined based on $Taqman^{(R)}$ Copy Number Assay. Fluorescence in situ hybridization (FISH) analysis was performed to confirm the normal signal pattern in C4 (calibrator) for TERC gene. Nine of CML patients showed TERC gene amplification (CNP=3), others had 2 CNP. A total of 17 CML patients expressed CNC>2.31 and the rest had 2.31>CNC>1.5. TERC gene CNP value in healthy individuals was 2 and their CNC value showed in range 1.59-2.31. The average CNC TERC gene copy number was 2.07, 1.99 and 1.94 in CML-IM Resistant patients, CML-IM Respond and healthy groups, respectively. No significant difference of TERC gene amplification observed between CML-IM Resistant and CML-IM Respond patients. Low levels of TERC gene amplification might not have a huge impact in haematological disorders especially in terms of resistance towards IM treatment.

• Journal of Medicine and Life Science
• /
• v.20 no.4
• /
• pp.158-165
• /
• 2023

This study prospective randomized controlled trial aims to test the impact of adding health education, awareness of some contributing factors and clinical guidance to therapeutic cabergoline given to infertile women with unexplained resistant hyperprolactinemia. It comprised 120 infertile women with unexplained persistent hyperprolactinemia not responding to therapeutic doses of cabergoline 1.5-2 mg/week who were subjected to proper history taking to exclude concomitant drug intake or possible brain problems in all cases. They were classified into group A (60 cases) who received health education and clinical guidance to search for possible contributing factors and were instructed to avoid them in addition to proper therapeutic doses of cabergoline, while group B (60 cases) received proper therapeutic doses of cabergoline only without clinical guidance. After 1 month, serum prolactin (PRL) was measured for all cases. All cases had high PRL level at the start of the study (79.9±28.4 [39-195] and 78.2±19.9 [42-189] in group A and B, respectively) without any significant difference. Pretreatment counselling revealed that lifestyle factors, sexual behaviors or feeding habits may contribute to resistant hyperprolactinemia in all cases without a significant difference between both groups. Serum PRL dropped significantly more in group A (20.14±10.31 [11-45] vs. 49.32±37.03 [12-100]) after combined health education, clinical guidance of the couple and proper treatment. It is concluded that lifestyle factors, sexual behaviors, and feeding habits would affect the response of hyperprolactinemia to treatment. Health education and clinical guidance with some advice to avoid them, would concomitantly improve the response of resistant hyperprolactinemia to therapeutic doses of dopamine agonists.

• Textile Coloration and Finishing
• /
• v.4 no.3
• /
• pp.74-81
• /
• 1992

Chemical bonded nonwoven fabric for apparel use and spunlaced nonwoven fabric for medical use were finished for soil resistance and blood replellency with fluorochemicals utilizing foam finishing technology (FFT) and conventional padding application techniques. The FFT process improved soil and abrasion resistance properties of nonwoven fabrics compared with the conventional padding process. Excellent water-oil-saline-alcohol repellency values and water impact penetration values were obtained in the spunlaced nonwoven fabrics with both techniques.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.130-131
• /
• 2015

이 논문은 패널의 각 단층 구성 재료에 고인장, 경량화, 부착성능, 내화성능 등을 향상시켜 단층 각각의 개별적인 특수 성능과 복합패널 구성물로서의 방호방폭 성능을 극대화 할 수 있는 섬유복합패널 외피와 충전재(나노복합소재) 및 접착제에 대한 기초 연구를 수행하였다.

• Composites Research
• /
• v.14 no.2
• /
• pp.22-32
• /
• 2001

Damage induced by low-velocity impact on the curved composite laminates was experimentally evaluated for CFRP cylindrical shells with the radius of curvatures of 50, 150, 300, and 500 mm. The result was then compared with that of flat laminates and with the results by nonlinear finite-element analysis. The radius of curvatures and the effective shell stiffness appeared to considerably affect the dynamic impact response of curved shells. Under the same impact energy level, the maximum contact force increased with the decreasing radius of curvatures, with reaching 1.5 times that for plates at the radius of curvature of 50 mm. Since the maximum contact farce is directly related to the impact damage, curved laminates can be more susceptible to delamination and less resistant to the low-velocity impact damage. Delamination was distributed rather evenly at each interface along the thickness direction of curved laminates on the contrary to the case of flat laminates, where delamination is typically concentrated at the interfaces away from the impact point. This implies that the effect of curvatures has to be considered for the design of a curved composite laminate.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2017

Hydrolysis resistance and mechanical property changes of polyketone (POK)/glass fiber (GF) composites were investigated for GF concentrations varying between 30 and 50%. The hydrolysis resistance of GF filled POK and polyamide66 (PA66, hydrolysis resistant grade) composites were compared. As shown by the experimental results, increasing the immersion time of the composites in a monoethylene glycol (MEG)/water solution at $120^{\circ}C$ had no impact or resulted in slightly decreased mechanical properties such as the tensile strength, tensile modulus, and strain at break in case of POK composites, whereas the mechanical properties of PA66 composites showed a significant drop. Increasing GF concentrations increased the tensile strength, tensile modulus, flexural strength, and flexural modulus of POK composites; however, impact strength did not show significant changes. Hydrolysis mechanisms of POK and PA66 are discussed.