• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.367-370
• /
• 2006

Ballistic Range는 오래전부터 짧은 시간에 극도의 고압상태를 만들어낼 수 있기 때문에 고속 충격역학, 발사체 공기역학, 새로운 재료의 생성과 같은 다양한 공학 분야에서 사용되어왔다. 2단 경 가스총은 가장 넓게 사용되어지고 있다. 현재의 실험적 연구는 발사체 가상실험을 쉽게 수행할 수 있는 새로운 타입의 Ballistic Range를 개발하기 위해 진행되어져왔다. Ballistic Range은 고압튜브, 피스톤, 펌프튜브, 충격튜브, 발사튜브로 구성된다. 펌프튜브와 발사튜브사이에 충격튜브의 삽입의 효과는 조사중이다. 실험은 발사체 속도의 다양한 변수들의 의존성을 찾기 위해 수행되었다. 고압튜브압력, 격막파열압력, 발사체질량은 다양한 발사체 속도를 얻기 위해 변화를 주었다. 저자의 이론적 연구를 통해 얻는 결과값과 실험적 결과값을 비교해보기로 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.744-752
• /
• 2007

Recently a fuel oil of the diesel engine in the ship is being changed with low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine like cylinder liner ring groove of piston crown, spindle and seat ring of exhaust valve are increased with using of heavy oil of low quality In particular the degree of wear and corrosion in between valve spindle and seat ring are more serious compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weld to the valve spindle and seat ring is a unique method to prolong the life of the exhaust valve in an economical point of view In this study. corrosion property of both weld metal zone and base metal was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 5% $H_2SO_4$ solution. in the case of being welded with some welding methods and welding materials to the exhaust valve specimen as the base metal. In all cases. the values of hardness of the weld metal zone were more high than that of the base metal. And their corrosion resistance were also superior to the base metal. The weld metal of A2F(AC SMAW: 2 pass welding with foreign electrode) showed a relatively good results to the corrosion resistance as well as the hardness compared to the ether welding methods and welding materials. Moreover it indicated that hardness of the weld metal by the domestic electrode was considerably high compared to that of the foreign electrode.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.263-266
• /
• 2007

Ballistic Range는 오래전부터 짧은 시간에 극도의 고압상태를 만들어낼 수 있기 때문에 고속 충격역학, 발사체 공기역학, 새로운 재료의 생성과 같은 다양한 공학 분야에서 사용되어왔다. 2단 경 가스총은 가장 넓게 사용되어지고 있다. 현재의 실험적 연구는 발사체 가상실험을 쉽게 수행할 수 있는 새로운 타입의 Ballistic Range를 개발하기위해 진행되어져왔다. 실험은 발사체 속도의 다양한 변수들의 의존성을 찾기 위해 수행되었다. 다양한 발차에 속도를 얻기 위해 고압실압력, 격막파열압력, 발사체와 피스톤 질량에 변화를 주었다. 또한 발사되는 발사체 주변의 유동을 알아보기 위해 유동장을 가시화하였다.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.97-104
• /
• 2015

This study is a part of the high pressure injection system development on the Turbo GDI engine in order to reduce smoke emission in case of using the low volatile(high DI) fuel which is used as normal gasoline fuel in the US market. Firstly, theoretical approach was done regarding gasoline fuel property, performance, definition of particle matters and its creation as well as problems of the high DI fuel. In this experimental study, 2L Turbo GDI engine was selected and optimized system parameter was inspected by changing fuel, fuel injection mode (single/multiple), fuel pressure, distance between injector tip and combustion chamber, start of injection, intake valve timing in engine dyno at all engine speed range with full load. In case of normal gasoline fuel, opacity was contained within 2% in all conditions. On the other hands, in case of low volatile fuel (high DI fuel), it was confirmed that the opacity was rapidly increased above 5,000 rpm at 14.5 ~ 20 MPa of fuel pressure and there were almost no differences on the opacity(smoke) between 17 MPa and 20 MPa fuel pressure. According to the SOI retard, smoke decrease tendency was observed but intake valve close timing change has almost no impact on the smoke level in this area. Consequently, smoke decrease was observed and 16% at 6000rpm respectively with injector washer ring installed. By removing injector washer to make injector tip closer to the combustion chamber, smoke decrease was observed by 46% at 5,500 rpm, 42% at 6,000 rpm. It is assumed that the fuel injection interaction with cylinder head, piston head, intake and exhaust valve is reduced so that impingement is reduced in local area.