• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1117-1126
• /
• 2013

The standard impact sources, standardized to rate the sound insulation performance of floor structure, should simulate well the real floor impact sources, which is very important to grade the floor structure then to establish counter plan to improve the performance of floor. Recently the tire, the standard heavyweight impact source, has been discussed that the impact force is too big to represent the real impact force. And researches have been carried on the applicability as a substitute or a supplementary. In addition, tapping machine, the standard lightweight impact source, is also questionable if it is representative of real lightweight impact source. This study aims to examine the similarity of standard impact sources with living impact sources, comparing the physical characteristics such as impact force, frequency contents and sound level. The result showed that the physical characteristics of standard impact sounds were somewhat different with that of living impact sounds, and the standard sources couldn't be verified from this result. Later subjective evaluation should be followed to compare how the physical differences make relationship with the subjective differences.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.93-96
• /
• 2002

Instrumented impact tests and compression-after-impact(CAI) tests have been used to evaluate the effect of temperature on the low-velocity impact characteristics of phenolic matrix composites reinforced with various woven glass fabric. Impact characteristics and damage area in laminates are evaluated by C-scan. It is shown that the extent of damage and residual compressive strength of the laminates vary with energy level and impact test temperature. The damage area increases with increasing impact energy and temperature. All these observations indicate reduced impact damage resistance and damage tolerance of the laminates at elevated temperature.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1142-1146
• /
• 2007

In this studies, subjective evaluation of heavy-weight floor impact sound through classification was conducted. Heavyweight impact sounds generated by an impact ball were recorded through dummy heads in apartment buildings. The recordings were classified according to the frequency characteristics of the floor impact sounds which are influenced by the floor structure with different boundary conditions and composite materials. The characteristics of the floor impact noise were investigated by paired comparison tests and semantic differential tests. Sound sources for auditory experiment were selected based on the actual noise levels with perceptual level differences. The results showed that roughness and fluctuation strength as well as loudness of the heavy-weight impact noise had a major effect on annoyance.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.264-267
• /
• 2005

Impact damages are very important in the perspective of residual strength of composite structures such as aircrafts, ships, and trains because those damages are sometimes not visible on the surface of the point of impact and the impact resistance of laminated composites is usually not so high. Thus, the impact characteristics of laminated composites should he investigated for the safety of composite structures. This paper investigates the low-velocity impact and damage detection conducted on woven carbon/epoxy laminates. Experimental results show that the type of damage is dependent on the impact energy level and the delamination area becomes larger as the impact energy increases.

• 대기
• /
• 제30권2호
• /
• pp.195-207
• /
• 2020

This study aims to introduce the structure of the impact-based heat health warning system on 165 counties in South Korea developed by the National Institute of Meteorological Sciences. This system was developed using the daily maximum perceived temperature (PTmax), which is a human physiology-based thermal comfort index, and the Local ENSemble prediction system for the probability forecasts. Also, A risk matrix proposed by the World Meteorological Organization was employed for the impact-based forecasts of this system. The threshold value of the risk matrix was separately set depending on regions. In this system, the risk level was issued as four levels (GREEN, YELLOW, ORANGE, RED) for first, second, and third forecast lead-day (LD1, LD2, and LD3). The daily risk level issued by the system was evaluated using emergency heat-related patients obtained at six cities, including Seoul, Incheon, Daejeon, Gwangju, Daegu, and Busan, for LD1 to LD3. The high-risks level occurred more consistently in the shorter lead time (LD3 → LD1) and the performance (r_s) was increased from 0.42 (LD3) to 0.45 (LD1) in all cities. Especially, it showed good performance (r_s = 0.51) in July and August, when heat stress is highest in South Korea. From an impact-based forecasting perspective, PTmax is one of the most suitable temperature indicators for issuing the health risk warnings by heat in South Korea.

• Journal of Information Science Theory and Practice
• /
• 제3권4호
• /
• pp.35-48
• /
• 2015

The aim of this study is to compare country output and citation impact as well as to assess the level of interdisciplinarity in the field of tribology research during the period 1998-2012, based on the SCOPUS database. Macro-level scientometric indicators such as growth rate, share of international collaborative papers, citation per paper, share of un-cited papers, and publication efficiency index were employed. Further, the Simpson Index of Diversity was used to measure the level of interdisciplinarity. The performance of top countries contributing more than 1000 papers during the study period was discussed. Contributions and share of continents and countries by income groups were examined. Further research contributions and citation impact of selected country groups were analyzed. This study reveals that high levels of interdisciplinarity exist in tribology research. Asia outperforms the other world regions and China contributes most of the papers (25%), while the United States receives most of the citations (22%).

• 대기
• /
• 제31권4호
• /
• pp.445-459
• /
• 2021

This study uses a cloud-resolving storm simulator (CReSS) to understand the individual effect of determinant meteorological factors on snowfall characteristics in the Yeongdong region based on the rawinsonde soundings for two snowfall cases that occurred on 23 February (Episode 1) and 13 December (Episode 2) 2016; one has a single-layered cloud and the other has two-layered cloud structure. The observed cloud and precipitation (snow crystal) features were well represented by a CReSS model. The first ideal experiment with a decrease in low-level temperature for Episode 1 indicates that total precipitation amount was decreased by 19% (26~27% in graupel and 53~67% in snow) compared with the control experiment. In the ideal experiment that the upper-level wind direction was changed from westerly to easterly, although total precipitation was decreased for Episode 1, precipitation was intensified over the southwestern side (specifically in terrain experiment) of the sounding point (128.855°E, 37.805°N). In contrast, the precipitation for Episode 2 was increased by 2.3 times greater than the control experiment under terrain condition. The experimental results imply that the low-level temperature and upper-level dynamics could change the location and characteristics of precipitation in the Yeongdong region. However, the difference in precipitation between the single-layered experiment and control (two-layered) experiment for Episode 2 was negligible to attribute it to the effect of upper-level cloud. The current results could be used for the development of guidance of snowfall forecast in this region.

• Carbon letters
• /
• 제16권2호
• /
• pp.107-115
• /
• 2015

Impact damages induced by a low-velocity impact load on carbon fiber reinforced polymer (CFRP) composite plates fabricated with various stacking sequences were studied experimentally. The impact responses of the CFRP composite plates were significantly affected by the laminate stacking sequences. Three types of specimens, specifically quasi-isotropic, unidirectional, and cross-ply, were tested by a constant impact carrying the same impact energy level. An impact load of 3.44 kg, corresponding to 23.62 J, was applied to the center of each plate supported at the boundaries. The unidirectional composite plate showed the worst impact resistance and broke completely into two parts; this was followed by the quasi-isotropic lay-up plate that was perforated by the impact. The cross-ply composite plate exhibited the best resistance to the low-velocity impact load; in this case, the impactor bounced back. Impact parameters such as the peak impact force and absorbed energy were evaluated and compared for the impact resistant characterization of the composites made by different stacking sequences.

• 농촌계획
• /
• 제14권3호
• /
• pp.63-73
• /
• 2008

The purpose of this study is to analyze the determinants of the digital divide at individual level and regional level in Korea, considering interaction between individual and the regional variables. Following results are obtained. First, individual level digital devide in the 16 different regions has been found in terms of Internet use, implying the needs for further analysis on impact of the regional factor in individual Internet use. Second, the result finds the impact of level-l individual variables, "gender, age, education, income and jobs" on digital divide, significantly at level 10% level. Third, the regional variables influencing the individual digital divide were not found at state level. However, regional factors might affect digital devide at county level. Study suggest some plans to reduce digital divide. First, the digital devide at individual level should be remedied by focusing on neglected class of people. Second, we need to approach the digital divide by analyzing in more detail, reflecting interactions of the regional variables and individual variables. Third, we should come up with a policy for mending the digital divide at regional level.

• 한국정보시스템학회지:정보시스템연구
• /
• 제24권1호
• /
• pp.45-66
• /
• 2015

This study empirically investigated the relationships among organizational culture, target costing, knowledge management activities, and corporate innovations. The results of this study showed that innovative and supportive culture positively affects the adoption degrees of target costing. According to the results, it was observed that target costing as well as innovative and supportive culture have a positive impact on levels of knowledge management activities(i.e., knowledge creation, sharing, storage, and application). It was also demonstrated that organizational culture has an indirect effect on activation of knowledge management activities through target costing. Thus, to enhance knowledge management activities, target costing must be aligned with appropriate types of organizational culture. In examining the impact of knowledge management activities on the frequencies of product and process innovations, no significant effect was found. Additional analyses that compare across three groups(i.e., low level group, middle level group and high level group in knowledge management activities) and between two groups(i.e., between high level group and middle level group or between high level group and low level group) were performed. The results of comparison showed that the degrees of product and process innovations are highest in high level group, but no significant differences are found in the degrees of innovations between middle level group and low level group.