• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.460-464
• /
• 2000

As device dimensions are lastly scaled down, impact ionization(I.I.) events are very important to analyze hot carrier transport in high energy region, and the exact model of impact ionization is demanded on device simulation. We calculate full band model by empirical pseudopotential method and the impact ionization rate is derived from modified Keldysh formula. We calculate impact ionization coefficients by full band Monte Carlo simulator to investigate temperature-and field-dependent characteristics of impact ionization for GaAs. Resultly impact ionization coefficients are In good agreement with experimental values at 300k. We know energy is increasing along increasing the field. while energy is decreasing along increasing the temperature since the phonon scattering rates for omission mode are very high at high temperature. The logarithmic fitting function of impact ionization coefficients is described as a second orders function for temperature and field. The residuals of the logarithmic fitting function are mostly within 5%. We know, therefore, logarithm of impact ionization coefficients has quadratic dependence on temperature and field, and we can save time of calculating the temperature- and field-dependent impact ionization coefficients.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.3
• /
• pp.305-325
• /
• 2015

In this paper, missile homing guidance laws to control the impact angle and time are proposed based on the polynomial function. To derive the guidance commands, we first assume that the acceleration command profile can be represented as a polynomial function with unknown coefficients. After that, the unknown coefficients are determined to achieve the given terminal constrains. Using the determined coefficients, we can finally obtain the state feedback guidance command. The suggested approach to design the guidance laws is simple and provides the more generalized optimal solutions of the impact angle and time control guidance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.697-703
• /
• 2000

As device dimensions are lastly scaled down, impact ionization(I.I.) events are very important to analyze hot carrier transport in high energy region, and the exact model of impact ionization is demanded on device simulation. We calculate full band model by empirical pseudopotential method and the impact ionization rate is derived from modified Keldysh formula. We calculate impact ionization coefficients by full band Monte Carlo simulator to investigate temperature dependent characteristics of impact ionization for GaAs as a function of field. Resultly impact ionization coefficients are in good agreement with experimental values at look. We how energy is increasing along increasing the field, while energy is decreasing along increasing the temperature since the phonon scattering rates for emission mode are very high at high temperature. The logarithmic fitting function of impact ionization coefficients is described as a second orders function of temperature and field. The residuals of the logarithmic fitting function are mostly within 5%. We Dow, therefore, the logarithm of impact ionization coefficients has quadratic dependence on temperature, and we can save time of calculating the temperature dependent impact ionization coefncients as a function of field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.451-454
• /
• 2000

The impact ionization(I.I.) is necessary to analyze carrier transport properties under the influence of high electric field. The full band I-k relation and Fermi's golden rule are used for the calculation of impact ionization rate. We have investigated the temperature- and field-dependent impact ionization coefficient for silicon using full band Monte Carlo simulation. The impact ionization coefficients calculated by our impact ionization model are agreed with experimental data at look. We know that impact ionization coefficients and electron energies are decreasing along increasing temperature due to increase of phonon scattering, especially by emission. The logarithm of impact ionization coefficients are fitted to linear function for temperature and field. The residuals of linear function are within the error bound of 5%. We know logarithmic impact ionization coefficients are linearly dependent on temperature and field.

• Journal of Korean Society of Transportation
• /
• v.18 no.4
• /
• pp.107-115
• /
• 2000

We suggest a method which solves the planar, two vehicle collision reconstruction problem. The method based on the Principle of impulse and momentum determines the pre-impact velocity components from Post-impact velocity components, vehicle Physical data and collision geometry. A novel feature is that although the impact coefficients such as the restitution coefficient and the impulse ratio are unknown, the method can estimate automatically the coefficients and calculate the pre-impact velocity components. This reverse calculation is important for vehicle accident reconstruction, since the pre-impact velocities are unknown and Post-impact Phase is the starting Point in a usual collision analysis. However. an inverse solution is not always Possible with the analytical rigid-body impact model. Mathematically, one does not exist under the common velocity condition. On the other hand, our method has a capability of reverse calculation under the condition if the absorbed energy during the collision process can be estimated using the crush profile. To validate the developed collision reconstruction a1gorithm, we use car-to-car collision test results. The analysis and experimental results agree well in the impact coefficients and the Pre-impact velocity components.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.3
• /
• pp.327-364
• /
• 2015

In this paper, a generalized guidance law with an arbitrary pair of guidance coefficients for impact angle control is proposed. Under the assumptions of a stationary target and a lag-free missile with constant speed, necessary conditions for the guidance coefficients to satisfy the required terminal constraints are obtained by deriving an explicit closed-form solution. Moreover, optimality of the generalized impact-angle control guidance law is discussed. By solving an inverse optimal control problem for the guidance law, it is found that the generalized guidance law can minimize a certain quadratic performance index. Finally, analytic solutions of the generalized guidance law for a first-order lag system are investigated. By solving a third-order linear time-varying ordinary differential equation, the blowing-up phenomenon of the guidance loop as the missile approaches the target is mathematically proved. Moreover, it is found that terminal misses due to the system lag are expressed in terms of the guidance coefficients, homing geometry, and the ratio of time-to-go to system time constant.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.183-188
• /
• 2007

In this paper, we propose a 2D-FE model in single impact with combined physical factors to obtain a unique residual stress by shot peening. Applied physical parameters include elastic-plastic deformation of shot ball, material damping coefficients, strain rate, dynamic friction coefficients. Single impact FE model consists of 2D axisymmetric elements. The FE model with combined factors showed converged and unique distributions of surface stress, maximum compressive residual stress and deformation depth. Further, in contrast to the FE models with rigid shot and elastic deformable shot, FE model with plastic deformable shot produces residual stresses very close to experimental solutions by X-ray diffraction. We therefore validated the 2D FE model with combined peeing factors and plastic deformable shot. This FE model will be a base of the 3D FE model for residual stresses by multi-impact shot peening.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.341-348
• /
• 2001

In this study, nonlinear vibration analysis of the cylindrical orthotropic porous thin plate under V-shaped tension distribution with wire impact damping is considered. We make dynamic model of the plate under the tension using commercial FEM code and reduce the number of its degrees of freedom using dynamic condensation. The dynamic model of wire is obtained as lumped mass model from string equation. And then we analyze the nonlinear vibration of the plate including the impact phenomenon between the plate and the wire using the reduced mass and stiffness matrices of the plate and lumped model of the wire. The contact phenomenon between them can be described by impact contact elements composed of contact stiffness coefficients from Hertzian contact theory and contact damping coefficients from restitution coefficient between them. And we discussed the results of nonlinear vibration analysis for variations of their design parameters.

• Journal of the Korean Regional Science Association
• /
• v.15 no.3
• /
• pp.1-13
• /
• 1999

Since the 1990's, the most important environmental issue on the earth is characterized by "global worming problem". The United Nations Framework Convention on Climate Change (UNFCCC) plays an significant role to solve this problem on a worldwide scale. The main purpose of this paper is to analyse the impact of $CO_2$ reduction on the Daegu regional economy through 1995 regional input-output coefficients derived from the 1995 national input coefficients table by using non-survey method. The sectoral impacts on output, income, and employment were computed under the decline-unequalized assumption in final demand influenced by $CO_2$ reduction. This article has six main sections. Section 1 is an introduction to this paper. Section 2 explains briefly the derivation method of the regional technical coefficients. Section 3 describes the model building through input-output multipliers. In section 4 regional data on output, income, employment and final demand are computed to estimate the regional impacts. Section 5 deals with impact analysis on the Daegu economy. Section 6 contains a brief summary and concludintg remarks. The research findings of this study can be summarized as follows. In 1995, under the assumption of 10% decrease on an average in final demand sectors, the economy of the region studied decreased \3600 billion of output, ￦1114 billion of income, and 49919 man-years of employment. The percent ratios of each value to the total showed 9.4%, 9.7%, and 9.2%, respectively. The dominant sectors associated with impact analysis within the region are chemicals and chemical products, paper, printing and publishing, and textiles and leather, etc; nevertheless, the least dominant sector is non-metallic mineral products. products.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.113-136
• /
• 2023

Purpose - Global production chains and their impacts on economic growth have drawn extensive attention from researchers. Close relationships among global production chains, export and economic growth have been illuminated, as evidenced by the fast and stable economic growth of East Asian economies. These economies perform various roles within global production chains using offshoring, in which the impact of import on domestic gross output is as strong as that of export. The impact of import on economic growth would depend on whether imported inputs substitute or complement domestic inputs production, which is likely to vary according to individual countries' functions within global production chains. The economic growth of concerned countries would also be diverse. However, little attention has been paid to the impact brought by imports compared to its significance. Design/methodology - The principal methodology used in this paper is structural decomposition analysis (SDA), widely chosen to elucidate the impact of various factors on domestic gross output using input-output tables. This paper extracts trade data of six Asian economies from the World Input-Output Database (WIOD) 2016 release that covers 43 countries for the period 2000-2014. The extracted data is then categorised into 37 sectors. First, this paper calculates the Feenstra-Hanson Offshoring Index (OSI) of each country. It then applies SDA to measure the changes in each economy's gross output, export, import input coefficients, and domestic input coefficients. Finally, after taking the first difference from pooled time-series data, it estimates the correlations between imported input coefficients and OSI using the ordinary least square (OLS) method. Findings - The main findings of this paper can be summarised as follows. Firstly, all six countries have increasingly engaged in global production chains, as evidenced by the growing size of OSI. Secondly, there are negative correlations in five countries except Japan, with sectoral differences. Thirdly, changes in import input coefficients are not negative in all six countries, indicating that offshoring does not necessarily substitute for domestic inputs production but does complement it and, therefore, fosters their economic growth. This is observed in China, Indonesia, Korea and Taiwan. Offshoring has led to an increase in the use of imported inputs, which has, in turn, stimulated domestic inputs production in these countries. Originality/value - While existing studies focus on the role of export in evaluating the impact of participating global production chains, this paper explicitly examines the unexplored impact of import on domestic gross output by considering both the substitution and the complementary effect, using the WIOD. The findings of this paper suggest that Asian economies have achieved fast and stable economic growth not only through successful export management but also through effective import management within global production chains. This paper recommends that the Korean government and enterprises carefully choose offshoring strategies to minimise disruption to domestic production chains or foster them.