• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 본 연구에서는 의사포텐셜방법을 사용하여 full 밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 GaAs 임팩트이온화의 온도와 전계에 대한 의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험 값과 잘 일치하였다. 또한 에너지는 전계가 증가할수륵 증가하고, 높은 온도에서는 포논산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트 이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차 식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수 식으로 표현된 임팩트이온화계수는 온도와 전계에 의존함을 알았고, 온도와 전계에 의존하는 임팩트이온화계수를 구하는데 시간을 절약할 수 있다

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권3호
• /
• pp.305-325
• /
• 2015

In this paper, missile homing guidance laws to control the impact angle and time are proposed based on the polynomial function. To derive the guidance commands, we first assume that the acceleration command profile can be represented as a polynomial function with unknown coefficients. After that, the unknown coefficients are determined to achieve the given terminal constrains. Using the determined coefficients, we can finally obtain the state feedback guidance command. The suggested approach to design the guidance laws is simple and provides the more generalized optimal solutions of the impact angle and time control guidance.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.697-703
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송 을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 털 연구에서는 의사포텐셜방법을 사용하여 풀밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 Gahs 임팩트이은화의 온도의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험값과 잘 일치하였다. 또한 에너지는 전계가 증가할수록 증가하고, 높은 온도에서는 포논 산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수식으로 표현된 임팩트 이온화계수는 온도에 의존함을 알았고, 임팩트이온화계수를 구하는데 시간을 절약할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.451-454
• /
• 2000

임팩트이온화는 고전계하에서 고에너지를 지닌 캐리어간 산란으로써 전자전송해석에 필수적인 요소이다. 임팩트이온화율 계산은 풀밴드 E-k관계와 페르미의 황금법칙을 이용하였다. 본 연구에서는 풀밴드 Monte Carlo 시뮬레이션을 이용하여 온도 및 전계에 대한 Si 임팩트이온화계수를 조사하였다. 임팩트이온화 모델에 의해서 계산된 look의 임팩트이온화계수는 실험값과 잘 맞았다. 온도상승에 따른 임팩트이온화계수와 전자의 에너지는 포논산란의 emission 모드의 증가 때문에 감소함을 알 수 있었다. 임팩트이온화계수의 대수는 온도와 전계에 대한 선형함수로 fitting 되었다. 이 선형함수의 오차는 5%이내이다. 결과적으로 임팩트이온화계수의 대수는 선형적으로 온도와 전계에 의존함을 알 수 있었다.

• 대한교통학회지
• /
• 제18권4호
• /
• pp.107-115
• /
• 2000

본 논문에서는 자동차 충돌사고 재구성에 직접 적용이 가능하도록, 주어지는 두 차량의 충돌후 속도, 차량에 관한 간단한 물성치와 기하학적 상대 위치들에 근거하여 충돌 직전 속도 성분들을 계산하는 소위 충돌 거동에 대한 역해석 방법을 제시한다. 또한, 제시하는 역해석 방법이 실용적 의미를 가지게 하기 위해서, 충돌 후 조건들로부터 반발계수와 역적비에 대한 적절한 추정 방법과 더불어 충돌 변형으로부터 유추할 수 있는 충돌 과정동안의 에너지 손실에 근거한 역해석 방안도 포함한다. 실차충돌 실험자료의 분석 결과에 따르면, 역적-운동량이론에만 근거한 역해석 결과뿐만 아니라 에너지 손실에 근거한 역해석 결과도 실험 결과와 좋은 일치를 보여주고 있다 강체역학의 범주내에서 역해석을 수행할 수 없는 공통속도 조건과 같은 경우나 반발계수에 관한 추정결과가 적절하지 않게 되는 등 단지 역적-운동량이론만을 이용한 해석 결과가 미흡한 경우에는 에너지 손실에 근거한 역해석 방법을 보완적으로 활용할 수 있을 것이다. 본 논문에서 제시한 충돌 과정 역해석 결과는 자동차충돌 해석 결과 및 충돌 전·후 거동에 대한 역미끄럼 해석 결과와 유기적으로 결합하여 자동차 충돌 사고 전 과정에 대한 직접적인 역해석을 수행할 수 있는 사고 재구성 패키지의 개발을 기대할 수 있다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권3호
• /
• pp.327-364
• /
• 2015

In this paper, a generalized guidance law with an arbitrary pair of guidance coefficients for impact angle control is proposed. Under the assumptions of a stationary target and a lag-free missile with constant speed, necessary conditions for the guidance coefficients to satisfy the required terminal constraints are obtained by deriving an explicit closed-form solution. Moreover, optimality of the generalized impact-angle control guidance law is discussed. By solving an inverse optimal control problem for the guidance law, it is found that the generalized guidance law can minimize a certain quadratic performance index. Finally, analytic solutions of the generalized guidance law for a first-order lag system are investigated. By solving a third-order linear time-varying ordinary differential equation, the blowing-up phenomenon of the guidance loop as the missile approaches the target is mathematically proved. Moreover, it is found that terminal misses due to the system lag are expressed in terms of the guidance coefficients, homing geometry, and the ratio of time-to-go to system time constant.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.183-188
• /
• 2007

In this paper, we propose a 2D-FE model in single impact with combined physical factors to obtain a unique residual stress by shot peening. Applied physical parameters include elastic-plastic deformation of shot ball, material damping coefficients, strain rate, dynamic friction coefficients. Single impact FE model consists of 2D axisymmetric elements. The FE model with combined factors showed converged and unique distributions of surface stress, maximum compressive residual stress and deformation depth. Further, in contrast to the FE models with rigid shot and elastic deformable shot, FE model with plastic deformable shot produces residual stresses very close to experimental solutions by X-ray diffraction. We therefore validated the 2D FE model with combined peeing factors and plastic deformable shot. This FE model will be a base of the 3D FE model for residual stresses by multi-impact shot peening.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.341-348
• /
• 2001

In this study, nonlinear vibration analysis of the cylindrical orthotropic porous thin plate under V-shaped tension distribution with wire impact damping is considered. We make dynamic model of the plate under the tension using commercial FEM code and reduce the number of its degrees of freedom using dynamic condensation. The dynamic model of wire is obtained as lumped mass model from string equation. And then we analyze the nonlinear vibration of the plate including the impact phenomenon between the plate and the wire using the reduced mass and stiffness matrices of the plate and lumped model of the wire. The contact phenomenon between them can be described by impact contact elements composed of contact stiffness coefficients from Hertzian contact theory and contact damping coefficients from restitution coefficient between them. And we discussed the results of nonlinear vibration analysis for variations of their design parameters.

• 지역연구
• /
• 제15권3호
• /
• pp.1-13
• /
• 1999

Since the 1990's, the most important environmental issue on the earth is characterized by "global worming problem". The United Nations Framework Convention on Climate Change (UNFCCC) plays an significant role to solve this problem on a worldwide scale. The main purpose of this paper is to analyse the impact of $CO_2$ reduction on the Daegu regional economy through 1995 regional input-output coefficients derived from the 1995 national input coefficients table by using non-survey method. The sectoral impacts on output, income, and employment were computed under the decline-unequalized assumption in final demand influenced by $CO_2$ reduction. This article has six main sections. Section 1 is an introduction to this paper. Section 2 explains briefly the derivation method of the regional technical coefficients. Section 3 describes the model building through input-output multipliers. In section 4 regional data on output, income, employment and final demand are computed to estimate the regional impacts. Section 5 deals with impact analysis on the Daegu economy. Section 6 contains a brief summary and concludintg remarks. The research findings of this study can be summarized as follows. In 1995, under the assumption of 10% decrease on an average in final demand sectors, the economy of the region studied decreased \3600 billion of output, ￦1114 billion of income, and 49919 man-years of employment. The percent ratios of each value to the total showed 9.4%, 9.7%, and 9.2%, respectively. The dominant sectors associated with impact analysis within the region are chemicals and chemical products, paper, printing and publishing, and textiles and leather, etc; nevertheless, the least dominant sector is non-metallic mineral products. products.

• Journal of Korea Trade
• /
• 제27권5호
• /
• pp.113-136
• /
• 2023

Purpose - Global production chains and their impacts on economic growth have drawn extensive attention from researchers. Close relationships among global production chains, export and economic growth have been illuminated, as evidenced by the fast and stable economic growth of East Asian economies. These economies perform various roles within global production chains using offshoring, in which the impact of import on domestic gross output is as strong as that of export. The impact of import on economic growth would depend on whether imported inputs substitute or complement domestic inputs production, which is likely to vary according to individual countries' functions within global production chains. The economic growth of concerned countries would also be diverse. However, little attention has been paid to the impact brought by imports compared to its significance. Design/methodology - The principal methodology used in this paper is structural decomposition analysis (SDA), widely chosen to elucidate the impact of various factors on domestic gross output using input-output tables. This paper extracts trade data of six Asian economies from the World Input-Output Database (WIOD) 2016 release that covers 43 countries for the period 2000-2014. The extracted data is then categorised into 37 sectors. First, this paper calculates the Feenstra-Hanson Offshoring Index (OSI) of each country. It then applies SDA to measure the changes in each economy's gross output, export, import input coefficients, and domestic input coefficients. Finally, after taking the first difference from pooled time-series data, it estimates the correlations between imported input coefficients and OSI using the ordinary least square (OLS) method. Findings - The main findings of this paper can be summarised as follows. Firstly, all six countries have increasingly engaged in global production chains, as evidenced by the growing size of OSI. Secondly, there are negative correlations in five countries except Japan, with sectoral differences. Thirdly, changes in import input coefficients are not negative in all six countries, indicating that offshoring does not necessarily substitute for domestic inputs production but does complement it and, therefore, fosters their economic growth. This is observed in China, Indonesia, Korea and Taiwan. Offshoring has led to an increase in the use of imported inputs, which has, in turn, stimulated domestic inputs production in these countries. Originality/value - While existing studies focus on the role of export in evaluating the impact of participating global production chains, this paper explicitly examines the unexplored impact of import on domestic gross output by considering both the substitution and the complementary effect, using the WIOD. The findings of this paper suggest that Asian economies have achieved fast and stable economic growth not only through successful export management but also through effective import management within global production chains. This paper recommends that the Korean government and enterprises carefully choose offshoring strategies to minimise disruption to domestic production chains or foster them.