• 한국항공우주학회지
• /
• 제46권9호
• /
• pp.742-751
• /
• 2018

본 논문은 지대지 교전상황에서 유도탄 탐색기의 Field-of-View(FOV)와 가속도 제한을 고려하여 충돌각을 제어하는 시변 편향 비례항법 유도법칙(Time Varying Biased Proportional Navigation Guidance Law)을 제안하고 있다. 제안한 유도법칙은 FOV 제한을 고려하여 3단계로 구성이 되는데 각 단계에서 편향이 가속도에 직접적인 영향을 미치기 때문에 편향을 생성하는데 있어서 단계가 넘어갈 때 전 단계의 마지막 편향이 다음 단계의 시작 편향이 되도록 하였다. 또한, 교전 상황과 물리적 구속조건을 고려하여 충돌각 도달 여부를 판단하는 로직 또한 설명하고 있다.

• 한국운동역학회지
• /
• 제30권2호
• /
• pp.155-163
• /
• 2020

Objective: This study to identify the mechanism of head impact that occurs during youth soccer game with regard to head injuries in sports. Method: Ten male subjects (age: 10.0±2.0 yrs.) were participated during 10 soccer practices spread out over a time period of 10 weeks. During each soccer game, the participants agreed and wore the X-Patch (wireless accelerometer, gyroscopes). The X-Patch records the head impact mechanics, such as peak linear acceleration (PLA), peak rotational acceleration (PRA), peak rotational velocity (PRV), Head Injury Criterion (HIC), and the location of impact. Results: A total of 501 impacts to the head were measured over the 10 soccer games, PLA 17.8±10.4 g, PRA 3168±2442 rad/s²; PRV 16.1±10.6 rad/s; HIC 11.7±34.2. The severity of impact was classified into 3 ranges; low 10~39 g (482 impacts); medium 40~69 g (17 impacts); and high >69 g (2 impacts). There are no significant differences in PLA and HIC (p=0.08, p=0.15), however PRA and PRV show the differences (p<.05) between each of the participants. For the analysis comparing between the soccer games, there are no significant differences in PLA, PRA, PRV and HIC (p=0.11, p=0.13, p=0.14, p=0.05). Conclusion: Our results indicated that there were significant differences between athletes, especially in terms of rotational acceleration, whereas there were significant differences in linear and rotational based variable between each of the soccer games. Although the vast majority of impacts were below 39 g there were 2 potentially dangerous impacts above 69 g. It is important that future research continuous to measure head impact mechanics during soccer to help understand head injury mechanisms to ensure the safety of athletes.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.287-301
• /
• 2004

Structural acceleration regulation is a means of managing structural response energy and enhancing the performance of civil structures undergoing large seismic events. A quadratic output regulator that minimizes a measure including the total structural acceleration energy is developed and tested on a realistic non-linear, semi-active structural control case study. Suites of large scaled earthquakes are used to statistically quantify the impact of this type of control in terms of changes in the statistical distribution of controlled structural response. This approach includes the impulses due to control inputs and is shown to be more effective than a typical displacement focused control approach, by providing equivalent or better performance in terms of displacement and hysteretic energy reductions, while also significantly reducing peak story accelerations and the associated damage and occupant injury. For earthquake engineers faced with the dilemma of balancing displacement and acceleration demands this control approach can significantly reduce that concern, reducing structural damage and improving occupant safety.

• Korea-Australia Rheology Journal
• /
• 제20권4호
• /
• pp.189-196
• /
• 2008

The pulsatile flow of blood through a stenosed artery under the influence of external periodic body acceleration is studied. The effect of non-Newtonian nature of blood in small blood vessels has been taken into account by modeling blood as a Casson fluid. The non-linear coupled equations governing the flow are solved using perturbation analysis assuming that the Womersley frequency parameter is small which is valid for physiological situations in small blood vessels. The effect of pulsatility, stenosis, body acceleration, yield stress of the fluid and pressure gradient on the yield plane locations, velocity distribution, flow rate, shear stress and frictional resistance are investigated. It is noticed that the effect of yield stress and stenosis is to reduce flow rate and increase flow resistance. The impact of body acceleration is to enhance the flow rate and reduces resistance to flow.

• 한국포장학회지
• /
• 제19권1호
• /
• pp.51-56
• /
• 2013

본 실험에서는 청과물의 포장 완충재로 사용되고 있는 골판지의 압축 및 충격특성을 이용하여 완충곡선(peak acceleration - static stress curve)을 구현하기 위한 알고리즘을 제시하였다. 본 연구에서 알 수 있듯이 한 개의 동적계수로도 완충곡선을 구현할 수 있음을 알 수가 있었으며, 기존의 완충곡선의 구현시 정적응력 범위 내에서의 실험횟수를 현저하게 줄일 수 있음을 알 수가 있었다. 또한, 골판지 완충재료 외에 플라스틱 발포체 완충재료에도 적용이 가능할 것으로 판단되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.969-974
• /
• 1994

The dynamic behavior of graphite/epoxy laminated composite shell structure due to low-velocity impact is investigated using the finite element method. In this analysis, the Newmark's constant-acceleration time integration algorithm is used. The impact response such as contact force, central deflection and dynamic strain history form shell structure analysis are compared with those form the plate non-linear analysis. The effects of curvature, impact velocity and mass of impactor on the composite shell are discussed.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.17-24
• /
• 2005

During handling unitized products, they are subjected to a variety environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product, and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization on pallets has been resulted in a reduction in the manual handling of products and with it a reduction in the shock hazards. This has caused and increasing interest in research focused on vibration caused damage. the use of pallets as a base for unitizing loads, aids in the mechanical handling, transportation and storage of products. Besides aiding in the handling, transportation and storage of products, a pallet also acts on and interface between the packaged goods and the distribution environment. The determination of the impact deformation of the cushioning materials such as tray cup (polymeric foam) and corrugated fiberboard pad must be carried out to design the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. In this study, the theoretical analysis of impact deformation for cushioning materials by dynamic vibration. The impact deformations of SW and DW corrugated fiberboard pad in acceleration amplitudes of 0.25 G-rms and 0.5 G-rms that were usually generated in transport vehicles during distribution environments were very small compare with the thickness of corrugated fiberboard pad. The maximum of vibration acceleration level of tray cup by vibration impact was about 3.2 G-rms. The theoretical allowable acceleration (G-factor) of the pear was 0.7102 G-rms, and the maximum dynamic deformation estimated within G-factor was about 1 mm.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.16-23
• /
• 2021

Objective: The purpose of the study was to compare the acceleration and shock attenuation (SA) of the runners with/without low back pain (LBG vs. NLBG) while running at 2.5 m/s, 3.0 m/s, 3.5 m/s and 4.0 m/s. Method: 15 adults without low back pain (age: 23.13±3.46 years, body weight: 70.13±8.94 kg, height: 176.79±3.68 cm, NLBG) and 7 adults with low back pain (age: 27.14±5.81 years, body weight: 73.10±10.74 kg, height: 176.41±3.13 cm, LBG) participated in this study. LBG was recruited through the VAS pain rating scale. All participants ran on an instrumented treadmill (Bertec, USA). Results: The LBG shows statistically greater vertical acceleration at the distal tibia during running at 3.5 m/s and 4.0 m/s and greater shock attenuation from the distal tibia to the head during running at 3.5 m/s compared with the NLBG during running (p<.05). As the speed increased, there was a statistically significant increase in vertical/resultant acceleration and shock attenuation for both groups. Conclusion: The findings indicated that the runners with low back pain (LBG) experience greater impact and shock attenuation compared with non-low back pain group (NLBG) during fast running. However, it is still inconclusive whether high impact on the lower extremity during running is the main cause of low back pain in the population. Thus, it is suggested that the study on low back pain should observe the characteristics of impact during running with individuals' low back pain experience and clinical symptoms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1306-1314
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2 %. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45 Hz~3.34 Hz and damping ratio revealed for 1.26~2.84 %. Maximum verticality deflection(4.86 mm) was sufficiently satisfied the design criteria(30.1 mm), but in the case of verticality acceleration's respond, design criteria BRDM(bridge design manual) & CTRL presentation derive rail limit value 0.35 g be more than value 6 time recorded, maximum was measured 0.49 g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.