• 대한안전경영과학회지
• /
• 제3권1호
• /
• pp.127-137
• /
• 2001

Because of the inherent flexibility in their design for improved material properties, composites have wide applications in aerospace vehicles and automobiles. The purpose of this study is to investigate the energy absorption characteristics of CFRf (Carbon Fiber Reinforced Plastics) tubes on static and impact tests. Static compression tests have been carried out using the static testing machine(Shin-gang buckling testing machine) and impact compression tests have been carried out using the vertical crushing testing machine. When such tubes were subjected to crushing loads, the response is complex and depends on the interaction between the different mechanisms that control the crushing process. The collapse characteristics and energy absorption were examined. Trigger and interlaminar number affect the energy absorption capability of CFRP tubes.

• 대한안전경영과학회지
• /
• 제9권5호
• /
• pp.49-55
• /
• 2007

A special cause producing temporary deviation in the underlying process can influence on process adjustment in First-Order System feedback control system. In this paper, the impact of special causes on the forecasts and the process adjustment that is based on the EWMA forecasts are derived for a first-order system. For some special causes with patterned type of contamination, the influence of the causes on the output process are explicitly investigated. A data set, contaminated by a special cause of level shift, is analyzed to confirm the impact numerically.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.169-174
• /
• 2011

The purpose of this study was to clarify the impact of national and corporate brand image of Korea on chinese consumers' purchasing Intention, also the impact of China on korean consumers' purchasing Intention. And the second aim of the research is to provide Korean businessmen who are interested in chinese market with information about chinese consumers' purchasing behaviour. Data from 205 chinese and korean consumers were analysed. As the result of analyses, it was found that Korean country image positive affects corporate brand image(samsung) and Chinese country image negative affects corporate brand image(haier) and product image. Korean corporate brand image only affects product image on chinese consumers. The product image affects Korean and Chinese consumer's purchasing intention.

• 대한가정학회지
• /
• 제38권4호
• /
• pp.85-98
• /
• 2000

PL law seeks consumers'just compensation and effective deterrence through shirting liability principle from negligence to strict liability. Impact analysis of Product Liability(PL) Low requires consumers' perspectives. This paper performed a policy delphi to predict the impact of PL law on consumers. The study surveyed the opinions of 30 specialists in PL area, ranging from government, officials, professors, researchers, consumer activists, to business executives, for three times. The consumer are as follows: first of all, PL law can contribute to damage compensation significantly in that it stimulates consumer complaints through non- court procedures. It is very unlikely that suits will be increased rapidly due to PL because of the current law environment. The degree of influence of PL law on damage compensation will very according to the content of PL law. Secondly, PL law can contribute to deterrence in that it encourages companies' efforts for product safety while it doesn't undermine consumers' attentions to safety. The influence on companies' efforts will vary according to the content of PL law.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.64-71
• /
• 1995

Tests were performed to evaluate the effect of thermal shock behavior on the mechanical properties of PC(poly-carbonate) and PET(polyethylene-terephthalate) with MBS(methylmethacrylate-butadiene-styrene) alloy. Five different material weight fraction for PC/PET were employed : 0/100, 25/75, 50/50, 75/25, and 100/0. Three different weight fraction of MBS were added to each PC/PET : 0, 3, and 9. Therefore fifteen different types of PC/PET/MBS were prepared using single screw extrude. and injection molding machine. One thermal shock cycle consisted of each one hour stay at -$40^{\circ}C$ chamber and $＋80^{\circ}C$ chamber without delay. Specimens were thermal shocked up to 20 and 40 cycles. Specific mechanical properities considered in this study include tensile, izod impact, and high rate Impact behaviors. In addition, the morphology of the fractured surface after Izod impact testing was investigated by the SEM (scanning electron microscope).

• 한국안전학회지
• /
• 제11권1호
• /
• pp.3-10
• /
• 1996

The mechanical properties and fatigue crack growth rate fracture toughness of permanent mould cast austempered gray cast iron(AGI) were compared to those of sand cast AGI. Specimens prepared for tensile, impact and fatigue test were austenitized at $900^{\circ}C$ and austempered at $270^{\circ}C$, $320^{\circ}C$, $370^{\circ}C$ and $420^{\circ}C$ for 1 hour. The strength, impact and fatigue crack propagation behavior of permanent mold cast AGI were found to be superior to those of sand cast AGI. Maximum values in tensile strength, BHN, Charpy impact energy, were obtained at the austempering temperature of $270^{\circ}C$. Samely, the slowest fatigue crack growth rate was appeared at the austempering temperature of $270^{\circ}C$. But ductility of AGI was not improved by permanent mould casting.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.245-254
• /
• 2005

방사성물질은 다양한 분야에서 사용되고 있으며 이에 따른 국내 및 국제간 운반이 계속적으로 증가하고 있다. 방사성물질을 수송하기 위해서는 수송용기의 안전성이 확보되어야 한다. 방사성물질 수송용기의 안전규정에 관해서는 국내 원자력법 운반안전규정 및 IAEA 운반규정에서 규정하고 있다. 방사성물질 수송용기 중에서 사용후핵연료를 운반하는 수송용기는 본체와 충격완충제로 구성되어 있다. 본 논문에서는 사용후핵연료 수송용기의 충격완충제에 작용하는 충격력을 계산하는 간편한 실험식을 차원해석을 통하여 유도하였다. 해석결과는 기존의 충격면적법 및 유한요소해석과 비교를 통하여 그 타당성을 입증하였다. 본 실험식을 이용하여 수송용기의 낙하충격력을 쉽게 예측할 수 있다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.726-734
• /
• 2008

While the structural safety assessment of Cargo Containment System(CCS) in membrane type LNG carriers has to be carried out in consideration of sloshing impact pressure, it is very difficult to figure out its dynamic response behaviors due to its very complex structural arrangements/materials and complicated phenomena of sloshing impact loading. For the development of its original technique, it is necessary to understand the characteristics of dynamic response behavior of CCS structure under sloshing impact pressure. In this study, for the exact understanding of dynamic response behavior of CCS structure in membrane Mark III type LNG carriers under sloshing impact pressure, its wet drop impact response analyses were carried out by using Fluid-Structure Interaction(FSI) analysis technique of LS-DYNA code, and were also validated through a series of wet drop experiments for the enhancement of more accurate shock response analysis technique. It might be thought that the structural response behaviors of impact response analysis, such as impact pressure impulses and resulted strain time histories, generally showed very good agreement with experimental ones with very appropriate use of FSI analysis technique of LS-DYNA code, finite element modeling and material properties of CCS structure, finite element modeling and equation of state(EOS) of fluid domain.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.99-104
• /
• 2011

An ILRT Interval for a nuclear power plant in Korea was extended from once in five years to once in ten years. Therefore, it is necessary to evaluate risk impact for ILRT interval extensions. In this paper, input data were generated for the reference plants, KSNP, using raw data such as meteorological data, population distribution data and source term data. And, using MACCS II code the risk impact assessment was performed based on the two methodologies of NUREG-1493 and NEI Interim Report. The risk impact derived from an ILRT interval extension was identified not to be significant. It is considered to apply this study and results to making an accident management plan and safety goal, and to the field of public acceptance.