• Steel and Composite Structures
• /
• v.47 no.5
• /
• pp.615-631
• /
• 2023

Steel corrosion induces structural deterioration of concrete-filled steel tubes (CFSTs), and any potential extreme action on a corroded CFST would pose a severe threat. This paper presents a comprehensive investigation on the lateral impact behaviour of CFSTs suffering from localised pitting corrosion damage. A refined finite element analysis model is developed for the simulation of locally corroded CFSTs subjected to lateral impact loads, which takes into account the strain rate effects on concrete and steel materials as well as the random nature of corrosion pits, i.e., the distribution patterns and the geometric characteristics. Full-range nonlinear analysis on the lateral impact behaviour in terms of loading and deforming time-history relations, nonlinear material stresses, composite actions, and energy dissipations are presented for CFSTs with no corrosion, uniform corrosion and pitting corrosion, respectively. Localised pitting corrosion is found to pose a more severe deterioration on the lateral impact behaviour of CFSTs due to the plastic deformation concentration, the weakened confinement and the reduction in energy absorption capacity of the steel tube. An extended parametric study is then carried out to identify the influence of the key parameters on the lateral impact behaviour of CFSTs with localised pitting corrosion. Finally, simplified design methods considering the features of pitting corrosion are proposed to predict the dynamic flexural capacity of locally pitted CFSTs subjected to lateral impact loads, and reasonable accuracy is obtained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.216-233
• /
• 2002

Due to the environmental problems of fuel consumption and vehicle emission, etc., automotive makers are trying to reduce the weight of vehicles. The most effective way to reduce a vehicle weight is to use lighter materials, such as aluminum and plastics. Aluminum Intensive Vehicle(AIV) has many advantages in the aspects of weight reduction, body stiffness and model change. So, most of automotive manufacturers are attempting to develop AIV using Aluminum Space Frame(ASF). The weight of AIV can be generally reduced to about 30% than that of conventional steel vehicle without the loss of impact energy absorbing capability. And the body stiffness of AIV is higher than that of conventional steel monocoque body. In this study, Aluminum Intensive Vehicle is developed and analyzed on the basis of steel monocoque body. The energy absorbing characteristics of aluminum extrusion components are investigated from the test and simulation results. The crush and crash characteristics of AIV based on the FMVSS 208 regulations are evaluated in comparison with steel monocoque. Using these results, the design concepts of the effective energy absorbing members and the design guide line to improve crashworthiness for AIV are suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.144-151
• /
• 2002

This work focuses on finding out the noise source and the method of reducing the noise level of LPG(liquefied petroleum gas) fuel injector. The noise of LPG injector in operating condition is due to the impact between valve and valve seat. This study shows that if the revolution of engine is increased, the noise of LPG injector will be more serious but it is not nearly affected by the increment of fuel pressure. The source and transmission paths of noise are identified through the analysis of noise generation mechanism and noise spectrum. The sound absorbing material is tested to verify its efficiency of sound absorption thor the LPG injector. The effect of noise reduction of absorbing material is remarkable when the engine speed is high. Consequently two methods of reducing the noise level are suggested from the identified results. The one is to equip the absorbing material on the outer side of injector and the other is to coat with a soft material or equip a soft ring on the surface of impact.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.782-789
• /
• 2010

It is important to satisfy the requirements and standards for the protections of passengers in a car accident. There are lots of studies on the crushing energy absorption of a structure member in automobiles. In this paper, we have studied to investigate collapse characteristics and moisture absorption movements of CFRP( carbon fiber reinforced plastics) structure members when CFRP laminates are under the hygrothermal environment. In particular, the absorbed energy, mean collapse load and deformation mode were analyzed for CFRP members which absorbed most of the collision energy. Also, variation of stacking angle is important to increase the energy absorption capability. The purpose of this study is to evaluate the strength reduction and moisture absorption behavior of CFRP hat shaped member. Therefore we have made a impact collapse experiment to research into the difference of absorbed energy and deformation mode between moisture absorbed specimen and non-moisture absorbed. As a result, the effect of moisture absorption and impact loads of approximately 50% reduction in strength are shown.

• Journal of Environmental Impact Assessment
• /
• v.22 no.1
• /
• pp.79-87
• /
• 2013

The purpose of this study is to establish PM-10 management manual for developing large scale sites by assessing the status of PM-10 reduction at ongoing large scale development sites. After analyzing the meteorological conditions and air quality characteristics of Sihwa MTV development site, ISCST3 (Industrial Source Complex Short Term Model 3) was implemented to predict PM-10 generation. The outcomes of ISCST3 modelling were utilized for verification of site survey data. As a result of applying air pollution modeling, the diffusion rate of PM-10 decreases according as the wind speed decreases. And the emission rate of PM-10 increase is linear to the concentration of PM-10. The reduction target of PM-10 can be derived quantitatively from the difference between the forecasted emission rate and the permissible emission limit of PM-10. The assessment of PM-10 characteristics which is deduced from ISCST3 and site survey can be practically applied to accomplish environmentally acceptable air quality manual for large scale development sites.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.323-336
• /
• 2021

The present study aims to examine the impact of real earnings management on the future value of the firm and its persistence. The study also tests suspect firm effects on the relationship between real earnings management and the future value of the firm. The sample of the present study consists of all listed non-financial firms from the year 2011 to 2018. Real earnings management has been measured in three alternative ways viz., abnormal operating cash flows, abnormal discretionary spending, and abnormal production cost. Tobin's Q is used as a measure of firm value. The interaction term of real earnings management and Tobin's Q is used to test firm value persistence. The results of the analysis disclose that out of three measures of real earnings management, abnormal reduction in discretionary spending only has a significant negative impact on the persistence of firm value. Moreover, the suspect firm analysis reveals that when the underlying motive of real earnings management is to meet zero earnings, both abnormal increases in operating cash flows and abnormal reduction in discretionary spending have a significant negative impact on firm value persistence.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.147-160
• /
• 2022

This study aim to use the GTAP model to analyze the impact of RCEP Fermentation in the Korean manufacturing industry by quantifying the RCEP tariff commitment table. The research results show RCEP has boosted output in all sub-manufactures except wood and printed matter due to increased export volumes. Wood products, on the other hand, are more reliant on imports due to lower production due to lower domestic sales or overall exports. After RCEP came into effect, the import and export scale of Korea's manufacturing industry expanded effectively. Among them, the positive impact on the intensive low-tech manufacturing industries such as clothing and leather products, wood products and printing products, and food, beverage and tobacco products is greater than the positive impact on the technology-intensive medium and high-tech and high-tech manufacturing industries. And found that the growth rate of Korea's manufacturing trade is basically proportional to the tax reduction rate of RCEP. Finally, in order to promote the development of the manufacturing industry, some suggestions are put forward that need the government's policy support and strengthen the regional cooperation with RCEP member countries.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.81-82
• /
• 2024

Urban air mobility (UAM) is emerging as an innovative transportation solution for cities. However, the potential noise impact on urban life must be carefully examined. Continuous exposure to UAM noise, with its unique frequency characteristics and temporal variability, may adversely affect citizens' health by causing sleep disorders, cardiovascular disease, and cognitive impairmenet, particularly in children. NASA has formed a UAM Noise Working Group to study this issue comprehensively. In Korea, the Seoul Metropolitan Government's UAM demonstration project is expected to accelerate related research and development. Scientific analysis, including noise measurement, prediction modeling, and health impact assessment, must be prioritized. Measures to minimize noise should be established based on this evidence, such as optimizing flight modes, developing noise reduction technologies, and establishing new noise management standards. Transparency and social consensus are crucial throughout this process. Expert review and open communication with civil society are necessary to address related concerns. Sharing demonstration project results and providing opportunities to experience UAM noise through digital twin simulations can help address public concerns and build social consensus. Proactively and scientifically tackling noise issues is essential for the sustainable development and successful integration of UAM into daily life.

• Journal of Technology Innovation
• /
• v.6 no.1
• /
• pp.187-214
• /
• 1998

This paper tries to examine the effectiveness of inventory reduction to the productivity increase and the impact of production environments on its effectiveness utilizing the Profit Impact of Market Strategy (PIMS) Database from the Strategic Planning Institute, a large data set that covers a variety of manufacturing activities from the early 1970s to late 1980s. The empirical results of this paper support the robustness of the principle of "Lean Production" or JIT system (also referred to as "Stockless Production"). We also find that the overall environment in which manufacturing strategic business units operate is an important factor in determining the different degrees of effectiveness of the work-in process (and raw materials) invertory reductions. In particular, we find that the effectiveness of the work-in process reduction varies according to the position in the product life cycly as well as the complexity and characteristics of the production processes.roduction processes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.31-35
• /
• 2006

Degradation characteristics of filament-winded composites due to accelerated environmental aging have been evaluated under high temperature, water immersion and thermal impact conditions. Two kinds of laminated composites coated by an urethane resin have been used: carbon-fiber reinforced epoxy(T700/Epon-826, CFRP) and glass-fiber reinforced phenolic (E-glass/phenolic, GFRP). For tensile strength of $0^{\circ}$ composites, CFRP did high reduction by 25% under the influence of high temperature and water while CFRP showed little degradation. However for water-immersed $90^{\circ}$ composites both CFRP and GFRP showed high reduction in tensile strength. Bending strength and modulus of $90^{\circ}$ composites were largely reduced in water-immersion as well as high temperature environment. Urethane coating on the composite surface improved the bending properties by 20%, however hardly showed such improvement for water-immersed $90^{\circ}$ composites.